
Mapei Repair MortarNo. 27 / 53
Mapegrout T80 Technical Data Sheet (TDS)
Repair Mortar to R4.
Single component and fibre reinforced, Mapegrout T80 is a thixotropic repair mortar for hardened concrete, classified R4, with resistance to sulphate and chloride attack. It is hand applied: trowelled or sprayed onto vertical surfaces in layers up to 60 mm and overhead up to 30 mm, from a minimum of 10 mm, with no formwork needed.
- Structural repairs applied by trowel or spray
- Industrial floors resisting oils, lubricants and heavy abrasion
- Repair of columns, pre-stressed and post-tensioned beams and slabs
- Canal linings, water retaining structures, tunnels and manholes
- Concrete in marine environments and chloride exposure
- Reinstating concrete cover damaged by corroded steel
Build a list across products and send it once, or ask about Mapegrout T80 on WhatsApp now.
- Class
- R4
- Consumption
- 1.92 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- grey
Mapei document 00481 · revision 10-2021
About Mapegrout T80
Its application list leans towards duty that other repair mortars struggle with, including floors that must resist oils and lubricants and take heavy abrasion in industrial settings, load bearing columns, pre-stressed and post-tensioned beams and slabs, canal linings, tunnels and manholes. Reinstating concrete cover lost to corroded reinforcement is the bread and butter job. Pot life is about an hour and the working range runs from 5 to 50 degrees, which covers most of a UAE year without special measures.
Documentation
Related documentation
Technical data sheet
Revision 10-2021 · 2.3 MB · PDF
Mapegrout T80 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 10 to 60 mm.
As published in the data sheet
1,920kg
- 1.92 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 77 packs of 25 kg bag
Taken from the Mapegrout T80 data sheet: Yield: 13 litres / 25 kg. No site allowance is added unless you turn one on. The sheet publishes a yield in litres of mortar per bag rather than a rate, so the rate here is 25 kg divided by 13 litres, which is 1.92 kg of powder per litre of mortar, and one square metre at one millimetre is one litre. Applied at a minimum thickness of 10 mm up to 60 mm in a single layer.
Application
Where it is used.
- 01Structural repairs applied by trowel or spray
- 02Industrial floors resisting oils, lubricants and heavy abrasion
- 03Repair of columns, pre-stressed and post-tensioned beams and slabs
- 04Canal linings, water retaining structures, tunnels and manholes
- 05Concrete in marine environments and chloride exposure
- 06Reinstating concrete cover damaged by corroded steel
Specification
Technical data.
- R4
- EN 1504
| Pack size | 25 kg |
|---|---|
| Pot life | ca. 1 hour |
| Set to light foot traffic | max 1-2 hours |
| Colours | grey |
| Mixing ratio | 100 parts of Mapegrout T80 with 15-17 parts water |
| Application temperature | from +5°C to +50°C |
| Consistency | powder |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Mapegrout T80 has a shelf life of 12 months. If stored at high temperature and/or high humidity conditions the shelf life may be reduced. |
| Ph | > 12.5 |
| Density | 1450 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Mapegrout T80. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 parts of Mapegrout T80 with 15-17 parts water. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
ca. 1 hour. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in dry conditions in the original, unopened bags, Mapegrout T80 has a shelf life of 12 months. If stored at high temperature and/or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapegrout T80, a repair mortar manufactured by Mapei, classified R4. Allow 1.92 kg/m2 per mm, as published by the manufacturer. Mix at 100 parts of Mapegrout T80 with 15-17 parts water. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapegrout T80 |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Classification | R4 |
| Consumption | 1.92 kg/m2 per mm |
| Pack size | 25 kg |
| Mixing ratio | 100 parts of Mapegrout T80 with 15-17 parts water |
| Set time | max 1-2 hours |
| Pot life | ca. 1 hour |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapegrout T80 is classified R4 according to EN 1504, as stated in the manufacturer's technical data sheet.
25 kg
You can download the official Mapegrout T80 technical data sheet as a PDF directly from this page, revision 10-2021, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Mapegrout T80 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout T80 you need, or describe the job and we will work it out with you.