
Mapei Repair MortarNo. 28 / 53
Mapegrout TX 60 ME Technical Data Sheet (TDS)
Repair Mortar to R4.
Mapegrout TX 60 ME is a single component, thixotropic, high strength fibre reinforced repair mortar, classified R4, for patching concrete that has failed. Coat thickness runs from 10 to 60 mm, trowelled or sprayed on vertical surfaces up to 60 mm and overhead up to 30 mm without formwork, so it covers the hand applied half of a repair specification.
- Honeycombing in beams, columns, walls and slabs in high rise work
- Marine, water treatment and sewerage structures
- Tunnels, pipes and below ground construction
- Cooling towers, chimneys and industrial environments
- Water retaining and excluding structures and canal linings
- Repair of precast concrete elements
Build a list across products and send it once, or ask about Mapegrout TX 60 ME on WhatsApp now.
- Class
- R4
- Consumption
- 1.92 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- grey
Mapei document 01306 · revision 4-2023
About Mapegrout TX 60 ME
Deeper sections and heavily congested reinforcement want a poured micro concrete instead. The application list is full of aggressive environments: honeycombing in beams, columns, walls and slabs in high rise work, marine and water treatment structures, sewerage facilities, tunnels, pipes, cooling towers and chimneys, and oil and gas installations. Every 25 kg bag yields 13 litres of mixed mortar, which is the figure to order against. Chloride and sulphate resistance suits UAE coastal and below ground exposure.
Documentation
Related documentation
Technical data sheet
Revision 4-2023 · 0.7 MB · PDF
Mapegrout TX 60 ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 10 to 60 mm.
As published in the data sheet
1,920kg
- 1.92 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 77 packs of 25 kg bag
Taken from the Mapegrout TX 60 ME data sheet: CONSUMPTION: 13.0 litres / 25 kg. No site allowance is added unless you turn one on. The sheet publishes a yield in litres of mortar per bag rather than a rate, so the rate here is 25 kg divided by 13.0 litres, which is 1.92 kg of powder per litre of mortar, and one square metre at one millimetre is one litre. Applied at a minimum thickness of 10 mm up to 60 mm in a single layer.
Application
Where it is used.
- 01Honeycombing in beams, columns, walls and slabs in high rise work
- 02Marine, water treatment and sewerage structures
- 03Tunnels, pipes and below ground construction
- 04Cooling towers, chimneys and industrial environments
- 05Water retaining and excluding structures and canal linings
- 06Repair of precast concrete elements
Specification
Technical data.
- R4
- EN 1504
| Coverage | 13.0 litres / 25 kg |
|---|---|
| Pack size | 25 kg |
| Colours | grey |
| Consistency | powder |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Mapegrout TX 60 ME has a shelf life of 12 months. If stored at high temperatures and/or high humidity conditions, the shelf life may be reduced. |
| Density | 2230 kg/m³ |
Typical values as Mapei prints them in the data sheet for Mapegrout TX 60 ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
When stored in dry conditions in the original, unopened bags, Mapegrout TX 60 ME has a shelf life of 12 months. If stored at high temperatures and/or high humidity conditions, the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapegrout TX 60 ME, a repair mortar manufactured by Mapei, classified R4. Allow 1.92 kg/m2 per mm, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapegrout TX 60 ME |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Classification | R4 |
| Consumption | 1.92 kg/m2 per mm |
| Pack size | 25 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapegrout TX 60 ME is classified R4 according to EN 1504, as stated in the manufacturer's technical data sheet.
As per the TDS: 13.0 litres / 25 kg
25 kg
You can download the official Mapegrout TX 60 ME technical data sheet as a PDF directly from this page, revision 4-2023, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Mapegrout TX 60 ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapegrout TX 60 ME you need, or describe the job and we will work it out with you.