
Mapei Bonding AgentNo. 29 / 53
Mapequick AF 70 Technical Data Sheet (TDS)
Bonding Agent to ASTM C1141 8, EN 934-5.
An accelerator rather than a repair product, Mapequick AF 70 is a liquid alkali free admixture dosed into sprayed concrete so that shotcrete sets quickly and gains strength after a very short curing time. It works in both wet mix and dry mix spray systems and conforms to ASTM C1141 and EN 934-5.
- Securing surfaces during tunnelling
- Sprayed concrete with high mechanical performance
- Consolidation of rock and cliff faces
- Sprayed concrete for structural tunnel repairs
- Final tunnel linings in sprayed concrete
- Wet mix and dry mix spray systems
Build a list across products and send it once, or ask about Mapequick AF 70 on WhatsApp now.
- Class
- ASTM C1141 8, EN 934-5
- Dosage
- 3 to 10 kg per 100 kg of cement
- Pack we stock
- 1288 kg
- Colour
- brownish
Mapei document 02354 · revision 6-2024
About Mapequick AF 70
The absence of alkali is the reason to choose it: concrete develops high mechanical resistance within minutes of placing with almost no loss of final strength against an unaccelerated mix, and the handling risk of an alkaline accelerator goes away. Dosage by weight is 3 to 10 kg per 100 kg of cement. Typical work is securing surfaces during tunnelling, consolidating rock and cliff faces, structural tunnel repairs and final linings. Shake the drum after long storage, because it is a suspension and will settle.
Documentation
Related documentation
Technical data sheet
Revision 6-2024 · 0.5 MB · PDF
Mapequick AF 70 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
3 to 10 kg per 100 kg of cement
As published in the data sheet
30.0 to 100kg
- 3 to 10 kg per 100 kg of cement
- 1000 kg of cement
Order 1 pack of 274 kg drum
Taken from the Mapequick AF 70 data sheet: CONSUMPTION, dosage in weight: from 3 to 10 kg per 100 kg cement. No site allowance is added unless you turn one on. A shotcrete accelerator, added at the nozzle during the spraying phase and never directly into the cement mixer. The sheet says not to use it with ordinary concrete, and that the setting time and strength gain achieved vary with the dosage, the type and amount of cement, its aging and the water binder ratio used. Supplied in 274 kg drums and 1288 kg IBCs, with bulk quantities on request.
Application
Where it is used.
- 01Securing surfaces during tunnelling
- 02Sprayed concrete with high mechanical performance
- 03Consolidation of rock and cliff faces
- 04Sprayed concrete for structural tunnel repairs
- 05Final tunnel linings in sprayed concrete
- 06Wet mix and dry mix spray systems
Specification
Technical data.
- ASTM C1141 8, EN 934-5
| Classification | ASTM C1141 8, EN 934-5 |
|---|---|
| Coverage | Dosage in weight: from 3-10 kg per 100 kg cement. |
| Pack size | 1288 kg |
| Colours | brownish |
| Consistency | liquid |
| Storage and shelf life | Store the product in closed containers at a temperature between +5°C and +30C, protected from frost and direct sunlight. If the product has been stocked for a long period, it is suggested to shake and homogenise it by using mechanised stirrer and/or recirculation pumps. It is strongly recommended no |
| Ph | 3 ± 1 |
| Density | 1.43 ± 0.03 at + 20 °C |
Typical values as Mapei prints them in the data sheet for Mapequick AF 70. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1288 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Store the product in closed containers at a temperature between +5°C and +30C, protected from frost and direct sunlight. If the product has been stocked for a long period, it is suggested to shake and homogenise it by using mechanised stirrer and/or recirculation pumps. It is strongly recommended no in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapequick AF 70, a bonding agent manufactured by Mapei, classified ASTM C1141 8, EN 934-5. Allow 3 to 10 kg per 100 kg of cement, as published by the manufacturer. Supplied in 1288 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapequick AF 70 |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Classification | ASTM C1141 8, EN 934-5 |
| Dosage | 3 to 10 kg per 100 kg of cement |
| Pack size | 1288 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapequick AF 70 is classified ASTM C1141 8, EN 934-5 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Dosage in weight: from 3-10 kg per 100 kg cement.
1288 kg
You can download the official Mapequick AF 70 technical data sheet as a PDF directly from this page, revision 6-2024, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Mapequick AF 70 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapequick AF 70 you need, or describe the job and we will work it out with you.

