
Mapei Bonding AgentNo. 30 / 53
Mapetard RCC ME Technical Data Sheet (TDS)
Bonding Agent to ASTM C494.
Mapetard RCC ME is a liquid retarding admixture with a plasticising effect, used to hold a cementitious mix workable rather than to speed anything up. Added at batching, it inhibits setting so that workability is maintained for up to 72 hours after the mix is batched, which is why it belongs with long transport runs, pumping from the surface, delays in injecting and any grout that cannot be placed in one shift.
- Cementitious mixes that need long workability
- Offsetting long transportation times
- Pumping cementitious mixes from the surface
- Grouting where injection may be delayed
- Mixes batched in very hot conditions
Build a list across products and send it once, or ask about Mapetard RCC ME on WhatsApp now.
- Class
- ASTM C494
- Dosage
- 1 to 6 litre per m3 of concrete
- Pack we stock
- 1000 l
- Colour
- brown
Mapei document 06868
About Mapetard RCC ME
It conforms to ASTM C494. Supplied in bulk, in 1000 litre IBCs and in 25 kg jerrycans, with a two year shelf life in closed containers kept above 5 degrees and out of direct sunlight. Heat shortens the working life of every cementitious mix, so on a UAE site this admixture is doing in reverse exactly what the weather does, and it earns its place in summer grouting.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Mapetard RCC ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
1 to 6 litres for each cubic metre of mix to be batched
As published in the data sheet
10.0 to 60.0litres
- 1 to 6 litre per cubic metre of concrete
- 10 m3 of concrete
Taken from the Mapetard RCC ME data sheet: DOSAGE: generally, the dosage in volume of Mapetard RCC ME is between 1 and 6 litres for each cubic metre of mix to be batched. No site allowance is added unless you turn one on. The dose depends on the mix composition, in particular on the amount of water and cement in it, and on how long the workability has to be held, which the sheet puts at up to 72 hours after batching. Different dosages must be tested through concrete trials first. Added during the batching, generally as the last ingredient and in any case after the water and the cement. Supplied in bulk, in 1000 litre IBCs and in 25 kg jerrycans, and because the jerrycan is quoted by weight and the dose by volume no pack count is offered here.
Application
Where it is used.
- 01Cementitious mixes that need long workability
- 02Offsetting long transportation times
- 03Pumping cementitious mixes from the surface
- 04Grouting where injection may be delayed
- 05Mixes batched in very hot conditions
Specification
Technical data.
- ASTM C494
| Classification | ASTM C494 |
|---|---|
| Pack size | Mapetard RCC ME is supplied in bulk, 1000 L IBCs and 25 kg jerrycans. |
| Colours | brown |
| Consistency | liquid |
| Storage and shelf life | Mapetard RCC ME can be stored for 2 years in closed containers, protected from frost (temperature > +5°C) and from direct sunlight. |
| Ph | 6.5 ± 1 |
| Density | 1.210 ± 0.03 at +25°C |
Typical values as Mapei prints them in the data sheet for Mapetard RCC ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
Mapetard RCC ME is supplied in bulk, 1000 L IBCs and 25 kg jerrycans.. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapetard RCC ME can be stored for 2 years in closed containers, protected from frost (temperature > +5°C) and from direct sunlight. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapetard RCC ME, a bonding agent manufactured by Mapei, classified ASTM C494. Allow 1 to 6 litre per m3 of concrete, as published by the manufacturer. Supplied in mapetard rcc me is supplied in bulk, 1000 l ibcs and 25 kg jerrycans.. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapetard RCC ME |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Classification | ASTM C494 |
| Dosage | 1 to 6 litre per m3 of concrete |
| Pack size | Mapetard RCC ME is supplied in bulk, 1000 L IBCs and 25 kg jerrycans. |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapetard RCC ME is classified ASTM C494 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
Mapetard RCC ME is supplied in bulk, 1000 L IBCs and 25 kg jerrycans.
You can download the official Mapetard RCC ME technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Mapetard RCC ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapetard RCC ME you need, or describe the job and we will work it out with you.

