Planigrout 300 ME A+b+c precision grout pack
Mapei's own picture. The pack we stock: 50.6 kg.

Mapei Precision GroutNo. 43 / 53

Planigrout 300 ME A+b+c Technical Data Sheet (TDS)

Mapei precision grout.

Planigrout 300 ME is the epoxy end of the Mapei grouting range: three pre dosed components, resin, hardener and graded aggregate to 2 mm, mixed into a fluid that is poured into sealed formwork rather than trowelled. Against a cementitious precision grout such as Mapefill GP ME it buys strength and chemistry, 90 MPa in compression and 28 MPa in flexure at seven days, with a bond to concrete above 3 MPa that fails in the concrete, not at the joint, which is why the sheet puts it under pumps, presses, crane rails and tie rod anchors that carry vibration.

  • Grouting under reciprocating or rotating equipment such as pumps in the oil, gas and water industry
  • Grouting and repairing under heavy crane and transporter rails subject to substantial vibration
  • Re-profiling and waterproofing of pile caps
  • Rebuilding damaged joints and butt joints in industrial floors
  • Filling large voids in concrete floors and slabs
  • Structural fixing of tie rod fasteners and bolts subject to vibration and chemical attack
Data sheet1.7 MB

Build a list across products and send it once, or ask about Planigrout 300 ME A+b+c on WhatsApp now.

Consumption
2.2 kg/m² per mm
Pack we stock
50.6 kg
Colour
component A off white, component B straw, component C grey, mix dark grey

Mapei document 00382 · revision 10-2025

About Planigrout 300 ME A+b+c

The site decides against it: pot life is one hour at +23°C, the concrete must be dry, sound and at least 25 N/mm2 in compression, and a cast in situ slab needs four weeks of curing first. Consumption is 2.2 kg per square metre for every millimetre of thickness.

Documentation

Related documentation

  • Technical data sheet

    Revision 10-2025 · 1.7 MB · PDF

    Planigrout 300 ME A+b+c as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Revision 9-2023 · 0.2 MB · PDF

    For the method statement and the site file.

    Download
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 5 to 50 mm.

As published in the data sheet

1,100kg

  • 2.2 kg/m2 per mm
  • 10 mm thick
  • over 50 m2

Order 22 packs of 50.6 kg kit, part A 4.8 kg plus part B 1.8 kg plus part C 2 bags of 22 kg, also a 25.3 kg kit

Send this quantity for a quote

Taken from the Planigrout 300 ME A+b+c data sheet: CONSUMPTION: 2.2 kg/m2 per mm of thickness. Emirates edition, document 382-10-2025 (UAE). No site allowance is added unless you turn one on. The Emirates sheet prints neither a maximum nor a minimum thickness, so the bounds on this control are ours, not the manufacturer's. The rate agrees with the printed density of the mix, 2200 kg/m3, since one square metre at one millimetre is one litre and 2200 kg/m3 is 2.2 kg per litre. The kits are pre dosed, so part packs have to be weighed, and the mix has to be placed inside a pot life of one hour at +23°C.

Application

Where it is used.

  1. 01Grouting under reciprocating or rotating equipment such as pumps in the oil, gas and water industry
  2. 02Grouting and repairing under heavy crane and transporter rails subject to substantial vibration
  3. 03Re-profiling and waterproofing of pile caps
  4. 04Rebuilding damaged joints and butt joints in industrial floors
  5. 05Filling large voids in concrete floors and slabs
  6. 06Structural fixing of tie rod fasteners and bolts subject to vibration and chemical attack

Specification

Technical data.

  • EN 1504 and ASTM C1107
Planigrout 300 ME A+b+c technical specifications from the manufacturer TDS
Coverage2.2 kg/m2 per mm of thickness
Pack size50.6 kg kit (part A 4.8 kg, part B 1.8 kg, part C 2 bags of 22 kg), also 25.3 kg kit (part A 2.4 kg, part B 0.9 kg, part C 22 kg)
Pot life1 hour at +23°C
Set to light foot traffic6 to 8 hours, final hardening 7 days
Colourscomponent A off white, component B straw, component C grey, mix dark grey
Mixing ratioA : B : C = 4.8 : 1.8 : 2x22 for the 50.6 kg pack, 2.4 : 0.9 : 1x22 for the 25.3 kg pack
Bond strengthabove 3 MPa on concrete, failure of the concrete (EN 1766)
Application temperaturefrom +5°C to +40°C
Consistencycomponent A liquid, component B liquid, component C powder, mix fluid
Storage and shelf life12 months in dry conditions in the original unopened packs
Densitydensity of the mix 2200 kg/m3, component A 1.13 g/cm3, component B 1.00 g/cm3
Viscositycomponent A 1,700 mPa·s, component B 130 mPa·s
Maximum aggregate size2.0 mm
Compressive strength90 MPa after 7 days (EN 196-1)
Flexural strength28 MPa after 7 days (EN 196-1)
Substrate requirementconcrete compressive strength at least 25 N/mm2 and tensile strength at least 1.5 N/mm2, cast in situ concrete cured at least 4 weeks

Typical values as Mapei prints them in the data sheet for Planigrout 300 ME A+b+c. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

50.6 kg kit (part A 4.8 kg, part B 1.8 kg, part C 2 bags of 22 kg), also 25.3 kg kit (part A 2.4 kg, part B 0.9 kg, part C 22 kg). Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

A : B : C = 4.8 : 1.8 : 2x22 for the 50.6 kg pack, 2.4 : 0.9 : 1x22 for the 25.3 kg pack. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

1 hour at +23°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in dry conditions in the original unopened packs in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Planigrout 300 ME A+b+c, a precision grout manufactured by Mapei. Allow 2.2 kg/m2 per mm, as published by the manufacturer. Mix at A : B : C = 4.8 : 1.8 : 2x22 for the 50.6 kg pack, 2.4 : 0.9 : 1x22 for the 25.3 kg pack. Supplied in 50.6 kg kit (part a 4.8 kg, part b 1.8 kg, part c 2 bags of 22 kg), also 25.3 kg kit (part a 2.4 kg, part b 0.9 kg, part c 22 kg). Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Planigrout 300 ME A+b+c
ProductPlanigrout 300 ME A+b+c
ManufacturerMapei
TypePrecision Grout
Consumption2.2 kg/m2 per mm
Pack size50.6 kg kit (part A 4.8 kg, part B 1.8 kg, part C 2 bags of 22 kg), also 25.3 kg kit (part A 2.4 kg, part B 0.9 kg, part C 22 kg)
Mixing ratioA : B : C = 4.8 : 1.8 : 2x22 for the 50.6 kg pack, 2.4 : 0.9 : 1x22 for the 25.3 kg pack
Set time6 to 8 hours, final hardening 7 days
Pot life1 hour at +23°C
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 2.2 kg/m2 per mm of thickness

50.6 kg kit (part A 4.8 kg, part B 1.8 kg, part C 2 bags of 22 kg), also 25.3 kg kit (part A 2.4 kg, part B 0.9 kg, part C 22 kg)

You can download the official Planigrout 300 ME A+b+c technical data sheet as a PDF directly from this page, revision 10-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Planigrout 300 ME A+b+c in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planigrout 300 ME A+b+c you need, or describe the job and we will work it out with you.

Chat on WhatsApp