Planicrete SP bonding agent pack
Mapei's own picture. The pack we stock: 1000 kg.

Mapei Bonding AgentNo. 42 / 53

Planicrete SP Technical Data Sheet (TDS)

Mapei bonding agent.

Planicrete SP is a multipurpose latex additive for mortars and a component of cementitious mortar adhesives, which places it with the mix modifiers and not with the repair or sealing ranges. Gauged into a mix it produces high performance mortar, screeds and renders: high resistance screeds and levelling compounds for interior and exterior use, cement renders, high adhesion cement slurry for bonding new screeds onto existing screeds and concrete, and cement mortar adhesive for fixing ceramic tiles on walls and floors.

  • High resistance screeds and levelling compounds, interior and exterior
  • Cement renders for interior and exterior use
  • High adhesion cement slurry for bonding new screeds to existing ones
  • Cement mortar adhesive for ceramic tiles on walls and floors
  • Modifying cement mortars applied in thin layers
Data sheet4.4 MB

Build a list across products and send it once, or ask about Planicrete SP on WhatsApp now.

Consumption
0.3 to 1 kg/m²
Pack we stock
1000 kg
Colour
greenish white

Mapei document 00700 · revision 4-2023

About Planicrete SP

It also lets a cement mortar be applied in thin layers. The mixed material has a pot life of about 90 minutes and an open time of 10 to 15 minutes, applied between 5 and 35 degrees. That short open time is the figure to watch on a hot, windy UAE site, where a skinned bed stops bonding.

Documentation

Related documentation

  • Technical data sheet

    Revision 4-2023 · 4.4 MB · PDF

    Planicrete SP as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Trowel or method

As published in the data sheet

50.0kg

  • Floor screed and wall plaster: 1 kg/m2
  • over 50 m2

Order 2 packs of 25 kg drum

Send this quantity for a quote

Taken from the Planicrete SP data sheet: APPROXIMATE COVERAGE: A. slurry bond coat or spatter-dash coat 0.3 kg per m2. B. floor screed and wall plaster 1 kg per m2 of 20 mm thickness. C. tile adhesive 0.5 to 1 kg per m2. No site allowance is added unless you turn one on. Pick the use before reading a number: the three uses on this sheet differ by more than three times. The floor screed and wall plaster figure is quoted per 20 mm of thickness and scales with it, so at 40 mm it is 2 kg/m2. Never use Planicrete SP neat as a slurry, always mix it with Portland cement. Also available in 5 kg drums.

Application

Where it is used.

  1. 01High resistance screeds and levelling compounds, interior and exterior
  2. 02Cement renders for interior and exterior use
  3. 03High adhesion cement slurry for bonding new screeds to existing ones
  4. 04Cement mortar adhesive for ceramic tiles on walls and floors
  5. 05Modifying cement mortars applied in thin layers

Specification

Technical data.

Planicrete SP technical specifications from the manufacturer TDS
Pack size1000 kg, 190 kg, 25 kg, 5 kg
Pot life90 minutes
Open time10-15 minutes
Coloursgreenish white
Mixing ratio1 part by weight of Planicrete SP
Application temperaturefrom +5°C to +35°C
Consistencyvery pasty
Storage and shelf lifePlanicrete SP can be stored for 12 months in the original packing, in a dry and cool place not directly under the sun. Protect from frost.
Density1.01 g/cm
Ph11.5
CompositionCement: CEM I 52.5

Typical values as Mapei prints them in the data sheet for Planicrete SP. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1000 kg, 190 kg, 25 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

1 part by weight of Planicrete SP. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

90 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Planicrete SP can be stored for 12 months in the original packing, in a dry and cool place not directly under the sun. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Planicrete SP, a bonding agent manufactured by Mapei. Allow 0.3 to 1 kg/m2, as published by the manufacturer. Mix at 1 part by weight of Planicrete SP. Supplied in 1000 kg, 190 kg, 25 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Planicrete SP
ProductPlanicrete SP
ManufacturerMapei
TypeBonding Agent
Consumption0.3 to 1 kg/m2
Pack size1000 kg, 190 kg, 25 kg, 5 kg
Mixing ratio1 part by weight of Planicrete SP
Pot life90 minutes
Open time10-15 minutes
Unit of measurementm2

Frequently Asked Questions

1000 kg, 190 kg, 25 kg, 5 kg

You can download the official Planicrete SP technical data sheet as a PDF directly from this page, revision 4-2023, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Planicrete SP in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planicrete SP you need, or describe the job and we will work it out with you.

Chat on WhatsApp