Planicrete bonding agent pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Bonding AgentNo. 41 / 53

Planicrete Technical Data Sheet (TDS)

Mapei bonding agent.

Planicrete is a synthetic rubber latex gauged into cement mixes to improve their adhesion and mechanical performance, so it modifies a mortar rather than being one. It is used as an admixture in cement based screeds, renders and thin smoothing layers, and in highly adhesive cement bonding slurries.

  • Admixture for cement based screeds, renders and thin smoothing layers
  • Highly adhesive cement bonding slurries
  • High strength screeds and renders for interior and exterior use
  • Bonding slurry for laying natural stone with the Mapestone system
  • Adhesive shotcrete for bonding renders
  • Mortars for filling holes and finishing precast elements
Data sheet2.0 MB

Build a list across products and send it once, or ask about Planicrete on WhatsApp now.

Pack we stock
25 kg
Colour
white

Mapei document 00701

About Planicrete

Typical work includes high strength screeds and renders inside and out, bonding slurries that let a new screed hold onto an existing one, cementitious slurry for laying natural stone with the Mapestone system, adhesive shotcrete for bonding renders, and mortars for filling holes and finishing precast elements. It is applied between 5 and 40 degrees, supplied in 25 kg and 5 kg containers, and keeps for 24 months unopened. Where the finished surface takes abrasion, such as a ramp or a channel, the latex earns its cost several times over.

Documentation

Related documentation

  • Technical data sheet

    2.0 MB · PDF

    Planicrete as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

Dosage follows the use, so the sheet's own table is the answer rather than a single rate. Planicrete to water and the consumption of Planicrete in g/m2 per mm of thickness: bonding screeds 10 to 35 mm, 1:3, 40 to 50. Floating screeds over 35 mm, 1:4, 30 to 40. Renders, 1:4, 60 to 70. Renders with Nivoplan, 1:5, 70 to 80. Scratch-coat layers for renders, 1:1, 220 to 230. Filler mortar, 1:2.5, 50 to 60. Bonding slurry, 1:1, 300 to 310.

There is no area calculator for Planicrete because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Admixture for cement based screeds, renders and thin smoothing layers
  2. 02Highly adhesive cement bonding slurries
  3. 03High strength screeds and renders for interior and exterior use
  4. 04Bonding slurry for laying natural stone with the Mapestone system
  5. 05Adhesive shotcrete for bonding renders
  6. 06Mortars for filling holes and finishing precast elements

Specification

Technical data.

Planicrete technical specifications from the manufacturer TDS
Pack size25 kg, 5 kg
Colourswhite
Application temperaturefrom +5°C to +40°C
Consistencyfluid liquid
Storage and shelf life24 months in unopened original packing. Protect from frost.
Density1.02 g/cm³
Dry solids36 %
CompositionCement: Type 32.5 R II/A-L 900 g

Typical values as Mapei prints them in the data sheet for Planicrete. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

24 months in unopened original packing. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Planicrete, a bonding agent manufactured by Mapei. Supplied in 25 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Planicrete
ProductPlanicrete
ManufacturerMapei
TypeBonding Agent
Pack size25 kg, 5 kg
Unit of measurementm2

Frequently Asked Questions

25 kg, 5 kg

You can download the official Planicrete technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Planicrete in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planicrete you need, or describe the job and we will work it out with you.

Chat on WhatsApp