
Mapei PlasterNo. 40 / 53
Nivoplan Technical Data Sheet (TDS)
Plaster to EN 998-1 GP CS IV.
Nivoplan is the cement, selected aggregate and synthetic resin powder Mapei uses to render and level walls and ceilings in layers from 2 to 20 mm, classified GP category CS IV to EN 998-1. The thickness band is the reason to choose it over Monofinish in our range, which is a fairing coat limited to 2 to 3 mm a pass.
- Smoothing walls prior to installing ceramic tiles
- Repairing old, damaged renders
- Levelling reinforced concrete swimming pool surfaces before tiling
- Levelling concrete facades before tiling or waterproofing by painting
- Smoothing foamed cement, brick and eraclit walls
- Rendering and levelling indoor and outdoor ceilings
Build a list across products and send it once, or ask about Nivoplan on WhatsApp now.
- Class
- EN 998-1 GP CS IV
- Consumption
- 1.5 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- grey in the technical data; the sheet describes Nivoplan as a grey or white powder
Mapei document 00151
About Nivoplan
Two rules on the sheet decide the job. Planicrete is not optional where the layer is thin over concrete or where ceramic or natural stone will follow: it goes in at 1 to 2 litres a bag as partial replacement for the mix water. And Nivoplan is ruled out on floors for lack of compressive strength, and on gypsum unless Primer G goes down first. Consumption is 1.5 kg per square metre per millimetre, so 10 mm is 15 kg. 25 kg bags, 12 months in dry storage.
Documentation
Related documentation
Technical data sheet
2.2 MB · PDF
Nivoplan as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2 to 20 mm.
As published in the data sheet
750kg
- 1.5 kg/m2 per mm
- 10 mm thick
- over 50 m2
Order 30 packs of 25 kg bags
Taken from the Nivoplan data sheet: CONSUMPTION: Consumption depends on the thickness of the layer but typically is 1.5 kg/m2 per millimetre of thickness (1 cm of thickness = 15 kg/m2). No site allowance is added unless you turn one on. The sheet prints 2 to 20 mm as the thickness possible for one coat and a maximum of 2 cm at a time, so both bounds are the manufacturer's. The default of 10 mm is the sheet's own worked example, 1 cm of thickness = 15 kg/m2. Nivoplan is not suitable for floors.
Application
Where it is used.
- 01Smoothing walls prior to installing ceramic tiles
- 02Repairing old, damaged renders
- 03Levelling reinforced concrete swimming pool surfaces before tiling
- 04Levelling concrete facades before tiling or waterproofing by painting
- 05Smoothing foamed cement, brick and eraclit walls
- 06Rendering and levelling indoor and outdoor ceilings
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 998-1 GP CS IV
- EN 998-1
| Classification | EN 998-1 GP CS IV |
|---|---|
| Coverage | 1.5 kg/m² per millimetre of thickness (1 cm of thickness = 15 kg/m²) |
| Pack size | 25 kg paper bags |
| Pot life | 2-3 h |
| Set to light foot traffic | a 1 cm layer takes tiles after 12 h at +23°C and 50% R.H. on normally absorbent substrates; waiting time before bonding at least 24 h depending on thickness, temperature and humidity |
| Colours | grey in the technical data; the sheet describes Nivoplan as a grey or white powder |
| Mixing ratio | 20-21 parts water per 100 parts Nivoplan by weight, or 5-5.25 litres of water per 25 kg bag; with Planicrete, approx. 3.25 litres of water plus 1-2 litres of Planicrete per bag |
| Bond strength | at least 1.0 MPa on brickwork, FP: B (EN 1015-12) |
| Application temperature | from +5°C to +40°C |
| Consistency | powder; very pasty when mixed |
| Storage and shelf life | 12 months in the original unopened packaging in a dry place |
| Density | 1400 kg/m³ powder; mix 1700-1900 kg/m³ |
| Thickness | from 2 to 20 mm for one coat, up to a maximum of 2 cm at a time |
| Waiting time | at least 14 days before painting |
| Flexural strength | 3.5 N/mm² |
| Compressive strength | 6.0 N/mm² in the final performance table; at least 12 MPa, category CS IV, against EN 1015-11 |
| Water absorption | W1 (EN 1015-18) |
| Thermal conductivity | 0.95 W/m·K (EN 1745) |
| Vapour resistance | coefficient of vapour permeability 13.6 (EN 1015-19) |
| Ph | approx. 12 for the mix |
| Reaction to fire | Euroclass A1 |
Typical values as Mapei prints them in the data sheet for Nivoplan. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg paper bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
20-21 parts water per 100 parts Nivoplan by weight, or 5-5.25 litres of water per 25 kg bag; with Planicrete, approx. 3.25 litres of water plus 1-2 litres of Planicrete per bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
2-3 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in the original unopened packaging in a dry place in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Nivoplan, a plaster manufactured by Mapei, classified EN 998-1 GP CS IV. Allow 1.5 kg/m2 per mm, as published by the manufacturer. Applied thickness from 2 to 20 mm for one coat, up to a maximum of 2 cm at a time. Mix at 20-21 parts water per 100 parts Nivoplan by weight, or 5-5.25 litres of water per 25 kg bag; with Planicrete, approx. 3.25 litres of water plus 1-2 litres of Planicrete per bag. Supplied in 25 kg paper bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Nivoplan |
|---|---|
| Manufacturer | Mapei |
| Type | Plaster |
| Classification | EN 998-1 GP CS IV |
| Consumption | 1.5 kg/m2 per mm |
| Thickness | from 2 to 20 mm for one coat, up to a maximum of 2 cm at a time |
| Pack size | 25 kg paper bags |
| Mixing ratio | 20-21 parts water per 100 parts Nivoplan by weight, or 5-5.25 litres of water per 25 kg bag; with Planicrete, approx. 3.25 litres of water plus 1-2 litres of Planicrete per bag |
| Set time | a 1 cm layer takes tiles after 12 h at +23°C and 50% R.H. on normally absorbent substrates; waiting time before bonding at least 24 h depending on thickness, temperature and humidity |
| Pot life | 2-3 h |
| Unit of measurement | m2 |
Frequently Asked Questions
Nivoplan is classified EN 998-1 GP CS IV according to EN 998-1, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.5 kg/m² per millimetre of thickness (1 cm of thickness = 15 kg/m²)
25 kg paper bags
You can download the official Nivoplan technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Nivoplan in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Nivoplan you need, or describe the job and we will work it out with you.