
Mapei Repair MortarNo. 53 / 53
Planitop Raso Max Technical Data Sheet (TDS)
Repair Mortar to EN 1504-3 R2, EN 1504-1 PCC, EN 998-1 GP CS IV.
Planitop Raso Max is a one component, fibre reinforced, water repellent lime cement smoothing and levelling mortar laid 2 to 10 mm thick over concrete, cementitious render, old quartz paint and scratch effect plastic coatings. It is extra white, with aggregate no larger than 0.6 mm, so it is a skim coat that is finished with a damp sponge float and then painted, not a bed for tiling.
- Levelling and finishing concrete and strong cementitious render before painting
- Smoothing walls over sound washable acrylic paints, quartz paints and plastic coatings
- Smoothing and levelling plasterboard panels previously treated with Primer G
- Smoothing and levelling internal glass coatings previously treated with Eco Prim Grip Plus
- Fine textured skim coats on internal and external concrete and cementitious render
Build a list across products and send it once, or ask about Planitop Raso Max on WhatsApp now.
- Class
- EN 1504-3 R2, EN 1504-1 PCC, EN 998-1 GP CS IV
- Consumption
- 1.45 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- White
Mapei document 01220 · revision 10-2026
About Planitop Raso Max
That is the line between it and Planitop Fast 330, the other levelling mortar we stock: Fast 330 is grey, works 3 to 30 mm and takes ceramic after 4 hours, while Raso Max wants 7 days before a Silexcolor, Silancolor, Elastocolor, Quarzolite, Colorite or Dursilite finish goes over it. Consumption is approximately 1.45 kg per square metre per millimetre. Mix a 25 kg bag with 5.5 to 6.0 litres of water; pot life is about 1 hour at 20 degrees.
Documentation
Related documentation
Technical data sheet
Revision 10-2026 · 1.1 MB · PDF
Planitop Raso Max as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Revision 5-2026 · 0.2 MB · PDF
For the method statement and the site file.
DownloadSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2 to 10 mm.
As published in the data sheet
218kg
- 1.45 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 9 packs of 25 kg bag
Taken from the Planitop Raso Max data sheet: CONSUMPTION: Approximately 1.45 kg/m2 per mm of thickness. Application thickness: 2-10 mm. No site allowance is added unless you turn one on. The 2 to 10 mm bounds are the sheet's own, printed both as the application thickness and on the bag. The 3 mm default is the calculator's, because the sheet names no recommended thickness within that range: set it to the job. The sheet also prints the mix as 100 kg of powder to 22-24 kg of water, which is the 5.5-6.0 litres it tells you to put in the bucket before a 25 kg bag, and a fresh mix density of 1700 kg/m3.
Application
Where it is used.
- 01Levelling and finishing concrete and strong cementitious render before painting
- 02Smoothing walls over sound washable acrylic paints, quartz paints and plastic coatings
- 03Smoothing and levelling plasterboard panels previously treated with Primer G
- 04Smoothing and levelling internal glass coatings previously treated with Eco Prim Grip Plus
- 05Fine textured skim coats on internal and external concrete and cementitious render
Specification
Technical data.
- EN 1504-3 R2, EN 1504-1 PCC, EN 998-1 GP CS IV
- EN 1504
- EMICODE EC1 Plus - very low emissions
| Classification | EN 1504-3 R2, EN 1504-1 PCC, EN 998-1 GP CS IV |
|---|---|
| Coverage | Approximately 1.45 kg/m² per mm of thickness. |
| Pack size | 25 kg bags |
| Pot life | approx. 1 hour (at +20°C) |
| Colours | White |
| Mixing ratio | 100 kg of Planitop Raso Max with 22 to 24 kg of water, which is 5.5 to 6.0 litres to a 25 kg bag |
| Bond strength | ≥ 1.0 MPa to concrete by pull-off (EN 1542) |
| Application temperature | surrounding and substrate temperature from +5°C to +35°C |
| Consistency | powder |
| Storage and shelf life | 12 months in its original packaging in a dry area |
| EMICODE | EC1 Plus - very low emissions |
| Thickness | 2 to 10 mm |
| Maximum aggregate size | ≤ 0.6 mm |
| Density | 1700 kg/m³ (density of mix) |
| Compressive strength | 3 MPa at 1 day, 12 MPa at 7 days, 16 MPa at 28 days |
| Recoat time | 7 days before painting with a product from the Silexcolor, Silancolor, Elastocolor, Quarzolite, Colorite or Dursilite ranges |
Typical values as Mapei prints them in the data sheet for Planitop Raso Max. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 kg of Planitop Raso Max with 22 to 24 kg of water, which is 5.5 to 6.0 litres to a 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 1 hour (at +20°C). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in its original packaging in a dry area in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planitop Raso Max, a repair mortar manufactured by Mapei, classified EN 1504-3 R2, EN 1504-1 PCC, EN 998-1 GP CS IV. Allow 1.45 kg/m2 per mm, as published by the manufacturer. Applied thickness 2 to 10 mm. Mix at 100 kg of Planitop Raso Max with 22 to 24 kg of water, which is 5.5 to 6.0 litres to a 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planitop Raso Max |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Classification | EN 1504-3 R2, EN 1504-1 PCC, EN 998-1 GP CS IV |
| Consumption | 1.45 kg/m2 per mm |
| Thickness | 2 to 10 mm |
| Pack size | 25 kg bags |
| Mixing ratio | 100 kg of Planitop Raso Max with 22 to 24 kg of water, which is 5.5 to 6.0 litres to a 25 kg bag |
| Pot life | approx. 1 hour (at +20°C) |
| Unit of measurement | m2 |
Frequently Asked Questions
Planitop Raso Max is classified EN 1504-3 R2, EN 1504-1 PCC, EN 998-1 GP CS IV according to EN 1504, as stated in the manufacturer's technical data sheet.
As per the TDS: Approximately 1.45 kg/m² per mm of thickness.
25 kg bags
You can download the official Planitop Raso Max technical data sheet as a PDF directly from this page, revision 10-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Planitop Raso Max in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planitop Raso Max you need, or describe the job and we will work it out with you.