Planitop HPC Floor repair mortar pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Repair MortarNo. 52 / 53

Planitop HPC Floor Technical Data Sheet (TDS)

Repair Mortar to R4.

One component where Planitop HPC is two, Planitop HPC Floor is a fluid cementitious mortar with rigid steel fibres, shrinkage compensated, classified R4, and aimed squarely at horizontal work. It is cast as a thin compact layer up to 40 mm thick with no additional reinforcement mesh, strengthening floor slabs from the top, whether reinforced concrete, brick and cement, wood or mixed brick and steel beam construction.

  • Strengthening floor slabs from the top in a thin layer
  • Seismic retrofitting of highly stressed elements
  • Repairs to industrial, road and airport concrete floors
  • Rebuilding and levelling pier caps and bearings on viaducts
  • Repairing floor slabs after scarifying damaged areas
Data sheet1.2 MB

Build a list across products and send it once, or ask about Planitop HPC Floor on WhatsApp now.

Class
R4
Consumption
2.1 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 01130

About Planitop HPC Floor

Other uses are seismic retrofitting of highly stressed elements, repairs to industrial, road and airport floors, rebuilding and levelling the upper parts of pier caps and bearings on viaducts, and reinstating slabs after damaged areas have been scarified away. Consumption is about 21 kg per square metre per centimetre. Being single component it mixes with water alone, which is simpler to control on site than a two part system in the heat.

Documentation

Related documentation

  • Technical data sheet

    1.2 MB · PDF

    Planitop HPC Floor as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 10 to 40 mm.

As published in the data sheet

2,100kg

  • 2.1 kg/m2 per mm
  • 20 mm thick
  • over 50 m2

Order 84 packs of 25 kg bag

Send this quantity for a quote

Taken from the Planitop HPC Floor data sheet: CONSUMPTION: approx. 21 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Thickness applied up to 40 mm without additional reinforcement mesh; the sheet prints no minimum, so the 10 mm lower bound is an input limit.

Application

Where it is used.

  1. 01Strengthening floor slabs from the top in a thin layer
  2. 02Seismic retrofitting of highly stressed elements
  3. 03Repairs to industrial, road and airport concrete floors
  4. 04Rebuilding and levelling pier caps and bearings on viaducts
  5. 05Repairing floor slabs after scarifying damaged areas

Specification

Technical data.

  • R4
  • EN 1504
Planitop HPC Floor technical specifications from the manufacturer TDS
CoverageApprox. 21 kg/m² per cm of thickness.
Pack size25 kg
Coloursgrey
Consistencypowder
Storage and shelf life12 months in its original packaging, in a dry sealed covered place.
Density2390 kg/m³

Typical values as Mapei prints them in the data sheet for Planitop HPC Floor. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in its original packaging, in a dry sealed covered place. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Planitop HPC Floor, a repair mortar manufactured by Mapei, classified R4. Allow 2.1 kg/m2 per mm, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Planitop HPC Floor
ProductPlanitop HPC Floor
ManufacturerMapei
TypeRepair Mortar
ClassificationR4
Consumption2.1 kg/m2 per mm
Pack size25 kg
Unit of measurementm2

Frequently Asked Questions

Planitop HPC Floor is classified R4 according to EN 1504, as stated in the manufacturer's technical data sheet.

As per the TDS: Approx. 21 kg/m² per cm of thickness.

25 kg

You can download the official Planitop HPC Floor technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Planitop HPC Floor in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planitop HPC Floor you need, or describe the job and we will work it out with you.

Chat on WhatsApp