Planitop HPC repair mortar pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Repair MortarNo. 51 / 53

Planitop HPC Technical Data Sheet (TDS)

Repair Mortar to R4.

Planitop HPC belongs to the flowable end of the repair range and to the strongest end of it: a two component, ultra high performance, shrinkage compensated fibre reinforced mortar with stiff steel fibres and high ductility, classified R4. It is poured where reinforced concrete has to be strengthened without adding much thickness or weight, up to 40 mm with no additional reinforcement mesh and thicker only where mesh is added.

  • Seismic retrofitting of highly stressed elements
  • Column and beam jacketing
  • Repairs to the lower sections of pre-tensioned viaduct beams
  • Rebuilding and levelling pier caps and bearings
  • Repairing floor slabs after scarifying damaged areas
Data sheet1.3 MB

Build a list across products and send it once, or ask about Planitop HPC on WhatsApp now.

Class
R4
Consumption
2 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 01119

About Planitop HPC

Work it suits includes seismic retrofitting of highly stressed elements, column and beam jacketing, repairs to the lower sections of pre-tensioned viaduct beams, rebuilding and levelling pier caps and bearings, and floor slabs scarified back to sound concrete. Consumption is roughly 20 kg per square metre per centimetre of thickness. Free flowing means formwork and a continuous pour, not a trowel and a tight corner.

Documentation

Related documentation

  • Technical data sheet

    1.3 MB · PDF

    Planitop HPC as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 10 to 40 mm.

As published in the data sheet

2,000kg

  • 2 kg/m2 per mm
  • 20 mm thick
  • over 50 m2

Order 80 packs of 25 kg bag of component A

Send this quantity for a quote

Taken from the Planitop HPC data sheet: CONSUMPTION: approx. 20 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Thickness applied up to 40 mm without additional reinforcement mesh; the sheet prints no minimum, so the 10 mm lower bound is an input limit. Component A is supplied in 25 kg bags and must be mixed with 6.5 percent by weight of component B, Fibre HPC, supplied in 6.5 kg boxes, so order the fibres alongside the bags.

Application

Where it is used.

  1. 01Seismic retrofitting of highly stressed elements
  2. 02Column and beam jacketing
  3. 03Repairs to the lower sections of pre-tensioned viaduct beams
  4. 04Rebuilding and levelling pier caps and bearings
  5. 05Repairing floor slabs after scarifying damaged areas

Specification

Technical data.

  • R4
  • EN 1504
Planitop HPC technical specifications from the manufacturer TDS
CoverageApprox. 20 kg/m² per cm of thickness.
Pack size25 kg
Coloursgrey
Consistencypowder
Storage and shelf life12 months in its original packaging, in a dry sealed covered place.
Density2450 kg/m³

Typical values as Mapei prints them in the data sheet for Planitop HPC. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in its original packaging, in a dry sealed covered place. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Planitop HPC, a repair mortar manufactured by Mapei, classified R4. Allow 2 kg/m2 per mm, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Planitop HPC
ProductPlanitop HPC
ManufacturerMapei
TypeRepair Mortar
ClassificationR4
Consumption2 kg/m2 per mm
Pack size25 kg
Unit of measurementm2

Frequently Asked Questions

Planitop HPC is classified R4 according to EN 1504, as stated in the manufacturer's technical data sheet.

As per the TDS: Approx. 20 kg/m² per cm of thickness.

25 kg

You can download the official Planitop HPC technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Planitop HPC in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planitop HPC you need, or describe the job and we will work it out with you.

Chat on WhatsApp