
Mapei Repair MortarNo. 50 / 53
Planitop HDM Maxi Technical Data Sheet (TDS)
Repair Mortar to R2.
Planitop HDM Maxi is a two component, fibre reinforced pozzolanic mortar with two distinct roles. Combined with alkali resistant glass or basalt mesh from the Mapegrid range it forms a fibre reinforced cementitious matrix system that structurally strengthens stone, brick, tuff and mixed masonry, raising the shear and tensile strength of walls and of arched and vaulted faces.
- Structural reinforcement of masonry with Mapegrid mesh
- Increasing shear and tensile strength of bay walls
- Strengthening arched and vaulted masonry elements
- Cladding facing walls and vaulted ceilings
- Levelling and repairing reinforced concrete structures
- Part of the Mapetherm Tile System for facades
Build a list across products and send it once, or ask about Planitop HDM Maxi on WhatsApp now.
- Class
- R2
- Consumption
- 1.85 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- grey
Mapei document 01065
About Planitop HDM Maxi
Used on its own it restores masonry texture and levels concrete and masonry surfaces, and it is part of the Mapetherm Tile System for tiling over external wall insulation. Component A comes in 25 kg bags and component B in 6.25 kg, mixed to a pot life of about an hour and applied between 5 and 35 degrees to a maximum of 25 mm. Consumption is 1.85 kg per square metre per millimetre. In the reinforced build up the mesh is bedded between two layers.
Documentation
Related documentation
Technical data sheet
2.7 MB · PDF
Planitop HDM Maxi as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 6 to 25 mm.
As published in the data sheet
1,850kg
- 1.85 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 60 packs of 31.25 kg kit (A 25 kg bag plus B 6.25 kg canister)
Taken from the Planitop HDM Maxi data sheet: CONSUMPTION: 1.85 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Applied by trowel or spray in layers up to 25 mm, with the sheet sending layers under 6 mm to Planitop HDM. A Mapegrid reinforced build up is two layers of around 5 to 6 mm each, so about 11 to 12 mm in total.
Application
Where it is used.
- 01Structural reinforcement of masonry with Mapegrid mesh
- 02Increasing shear and tensile strength of bay walls
- 03Strengthening arched and vaulted masonry elements
- 04Cladding facing walls and vaulted ceilings
- 05Levelling and repairing reinforced concrete structures
- 06Part of the Mapetherm Tile System for facades
Specification
Technical data.
- R2
- EN 1504
| Coverage | 1.85 kg/m² per mm of thickness. |
|---|---|
| Pack size | 25 kg, 6.25 kg |
| Pot life | approx. 1 hour |
| Colours | grey |
| Mixing ratio | 25 kg of Planitop HDM Maxi component A with 6.25 kg of |
| Application temperature | from +5 to +35°C |
| Consistency | powder |
| Storage and shelf life | Planitop HDM Maxi component A may be stored for 12 months in its original packaging in a dry place. This product complies with the prescriptions of Reg. (EC) N. 1907/2006 (REACH) - Annex XVII, article 47. Planitop HDM Maxi component B may be stored for 24 months. Store both components at a temperatu |
| Density | 1,200 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Planitop HDM Maxi. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg, 6.25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
25 kg of Planitop HDM Maxi component A with 6.25 kg of. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 1 hour. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Planitop HDM Maxi component A may be stored for 12 months in its original packaging in a dry place. This product complies with the prescriptions of Reg. (EC) N. 1907/2006 (REACH) - Annex XVII, article 47. Planitop HDM Maxi component B may be stored for 24 months. Store both components at a temperatu in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planitop HDM Maxi, a repair mortar manufactured by Mapei, classified R2. Allow 1.85 kg/m2 per mm, as published by the manufacturer. Mix at 25 kg of Planitop HDM Maxi component A with 6.25 kg of. Supplied in 25 kg, 6.25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planitop HDM Maxi |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Classification | R2 |
| Consumption | 1.85 kg/m2 per mm |
| Pack size | 25 kg, 6.25 kg |
| Mixing ratio | 25 kg of Planitop HDM Maxi component A with 6.25 kg of |
| Pot life | approx. 1 hour |
| Unit of measurement | m2 |
Frequently Asked Questions
Planitop HDM Maxi is classified R2 according to EN 1504, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.85 kg/m² per mm of thickness.
25 kg, 6.25 kg
You can download the official Planitop HDM Maxi technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Planitop HDM Maxi in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planitop HDM Maxi you need, or describe the job and we will work it out with you.