Mapecoat TNS Base Coat flooring system pack
Mapei's own picture. The pack we stock: 20 kg.

Mapei Flooring SystemNo. 08 / 79

Mapecoat TNS Base Coat Technical Data Sheet (TDS)

Mapei flooring system.

Between a primed court and its coloured playing surface sits a build layer, and this is it. Mapecoat TNS Base Coat is a concentrated acrylic resin base coat in water dispersion for the multi layer Mapecoat TNS systems used on tennis, padel, pickleball and multi sport areas.

  • Tennis, padel and pickleball court systems
  • Multi sport area installation
  • Intermediate build layer in Mapecoat TNS systems
  • Levelling bituminous and cementitious court substrates
  • Outdoor sports surface construction
Data sheet0.5 MB

Build a list across products and send it once, or ask about Mapecoat TNS Base Coat on WhatsApp now.

Consumption
0.3 to 1.1 kg/m²
Pack we stock
20 kg
Colour
Base T, Grey, White, White HV

Mapei document 08304

About Mapecoat TNS Base Coat

Its job is to even out the substrate and give the finish coats something uniform to sit on, so the colour and the pace of the court come out as specified rather than as the asphalt beneath dictates. Bond strength is quoted above 0.8 N/mm. Shades are Base T, Grey, White and White HV, in 20 kg and 5 kg packs. On a UAE court, programme application for the cooler end of the day so the dispersion is not flashing off as it is laid.

Documentation

Related documentation

  • Technical data sheet

    0.5 MB · PDF

    Mapecoat TNS Base Coat as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Trowel or method

As published in the data sheet

35.0 to 55.0kg

  • Porous substrate, first and second coat: 0.7 to 1.1 kg/m2
  • over 50 m2

Order 2 to 3 packs of 20 kg drum

Send this quantity for a quote

Taken from the Mapecoat TNS Base Coat data sheet: CONSUMPTION (referred to undiluted product applied on a bituminous conglomerate substrate): porous substrates, first coat 0.4 to 0.6 kg/m2 and second coat 0.3 to 0.5 kg/m2; non porous substrates, first coat 0.2 to 0.4 kg/m2 and second coat 0.1 to 0.3 kg/m2. No site allowance is added unless you turn one on. Each row is the sheet's two printed coats added together, which is how the system is actually laid; the sheet prints the coats separately as 0.4 to 0.6 then 0.3 to 0.5 on a porous substrate and 0.2 to 0.4 then 0.1 to 0.3 on a non porous one. The figures are for undiluted product on a bituminous conglomerate, and the sheet has the binder mixed with 0.1 to 0.5 mm quartz sand and diluted with water before use, which the figures do not include. The default is the porous row because it is the heavier of the two.

Application

Where it is used.

  1. 01Tennis, padel and pickleball court systems
  2. 02Multi sport area installation
  3. 03Intermediate build layer in Mapecoat TNS systems
  4. 04Levelling bituminous and cementitious court substrates
  5. 05Outdoor sports surface construction

Specification

Technical data.

  • EN 13813
Mapecoat TNS Base Coat technical specifications from the manufacturer TDS
Coverage0.7-1.1 kg/m2 over two coats on a porous substrate, 0.3-0.7 kg/m2 on a non-porous one
Pack size20 kg, 5 kg
ColoursBase T, Grey, White, White HV
Bond strength> 0.8 N/mm
Application temperaturefrom +10C to +35C
Consistencythick liquid
Storage and shelf lifeMapecoat TNS Base Coat Binder remains stable for 24 months if stored in a dry place away from sources of heat at a temperature of +5°C to +30°C.Protect from frost.
Densityapprox. 1.22 g/cm³
Dry solidsapprox. 48%

Typical values as Mapei prints them in the data sheet for Mapecoat TNS Base Coat. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

20 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Mapecoat TNS Base Coat Binder remains stable for 24 months if stored in a dry place away from sources of heat at a temperature of +5°C to +30°C.Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapecoat TNS Base Coat, a flooring system manufactured by Mapei. Allow 0.3 to 1.1 kg/m2, as published by the manufacturer. Supplied in 20 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapecoat TNS Base Coat
ProductMapecoat TNS Base Coat
ManufacturerMapei
TypeFlooring System
Consumption0.3 to 1.1 kg/m2
Pack size20 kg, 5 kg
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 0.7-1.1 kg/m2 over two coats on a porous substrate, 0.3-0.7 kg/m2 on a non-porous one

20 kg, 5 kg

You can download the official Mapecoat TNS Base Coat technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapecoat TNS Base Coat in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Base Coat you need, or describe the job and we will work it out with you.

Chat on WhatsApp