
Mapei Flooring SystemNo. 09 / 79
Mapecoat TNS Binder Technical Data Sheet (TDS)
Mapei flooring system.
Nothing here goes down neat. Mapecoat TNS Binder is an acrylic resin binder in water dispersion, diluted with 15 to 20 per cent water and then mixed with graded quartz sand to make the paste that actually builds a tennis court, a multi purpose pitch, a cycle track or a footpath.
- Indoor and outdoor tennis courts
- Multi purpose playing fields
- Basketball, volleyball and handball courts
- Five a side football pitches
- Cycle tracks and footpaths
- Resurfacing courts that are already painted
Build a list across products and send it once, or ask about Mapecoat TNS Binder on WhatsApp now.
- Consumption
- 0.9 to 1.2 kg/m²
- Pack we stock
- 18 kg
- Colour
- 10 Red, 15 Sea Blue
Mapei document 00929
About Mapecoat TNS Binder
The ratio decides the layer: 40:60 binder to quartz for the one or two filling coats, 50:50 for an intermediate coat, 60:40 for the two or three final coats. Fine sand in the last layer gives a smoother, faster surface and coarse sand a slower one, so pace of play is settled at the mixing bucket. Allow 0.9 to 1.2 kg/m² of concentrated product and 12 to 24 hours between coats. Prime concrete with Mapecoat I 600 W diluted 1:1, and never apply above +35°C.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Mapecoat TNS Binder as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
45.0 to 60.0kg
- Even substrate, rubber trowel: 0.9 to 1.2 kg/m2
- over 50 m2
Order 3 to 4 packs of 18 kg drum
Taken from the Mapecoat TNS Binder data sheet: CONSUMPTION: approximately 0.9 to 1.2 kg/m2 for application on even substrates with a rubber trowel, referring to concentrated product applied as indicated in the Preparation of the product section. No site allowance is added unless you turn one on. The sheet opens the same paragraph with a warning that consumption of the first coats is heavily influenced by the absorption and roughness of the substrate, so on a rough or thirsty court the first coat will take more than this.
Application
Where it is used.
- 01Indoor and outdoor tennis courts
- 02Multi purpose playing fields
- 03Basketball, volleyball and handball courts
- 04Five a side football pitches
- 05Cycle tracks and footpaths
- 06Resurfacing courts that are already painted
Specification
Technical data.
- EN 13813
| Coverage | Consumption of the first coats is heavily influenced by the absorption and roughness of the substrate. Consumption is approximately 0.9-1.2 kg/m² for application on even substrates with a rubber trowel (refers to concentrated product applied as indicated above in the “Preparation of the product” sec |
|---|---|
| Pack size | 18 kg |
| Colours | 10 Red, 15 Sea Blue |
| Consistency | pasty liquid |
| Storage and shelf life | 24 months if stored in a dry place away from sources of heat at a temperature of between +5°C and +35°C. Protect from freezing weather. |
| Density | approx. 1.2 g/cm³ |
| Dry solids | approx. 50 % |
Typical values as Mapei prints them in the data sheet for Mapecoat TNS Binder. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
18 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months if stored in a dry place away from sources of heat at a temperature of between +5°C and +35°C. Protect from freezing weather. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat TNS Binder, a flooring system manufactured by Mapei. Allow 0.9 to 1.2 kg/m2, as published by the manufacturer. Supplied in 18 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat TNS Binder |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Consumption | 0.9 to 1.2 kg/m2 |
| Pack size | 18 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption of the first coats is heavily influenced by the absorption and roughness of the substrate. Consumption is approximately 0.9-1.2 kg/m² for application on even substrates with a rubber trowel (refers to concentrated product applied as indicated above in the “Preparation of the product” sec
18 kg
You can download the official Mapecoat TNS Binder technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat TNS Binder in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Binder you need, or describe the job and we will work it out with you.

