
Mapei Surface TreatmentNo. 10 / 79
Mapecoat TNS Color Technical Data Sheet (TDS)
Mapei surface treatment.
Coat count is what separates the two jobs this product does. Mapecoat TNS Color is a fine grained acrylic coloured coating for the multi layer Mapecoat TNS systems, used either as a single filler undercoat closing the pores of Mapecoat TNS RP matting or as the coloured layer itself in two coats, three where a vivid shade will not cover.
- Filler undercoat for Mapecoat TNS RP matting
- Basketball and volleyball court coatings
- Skating areas and velodromes
- Multi purpose sports surfaces indoors and out
- Restoring surfaces already coated with synthetic resins
Build a list across products and send it once, or ask about Mapecoat TNS Color on WhatsApp now.
- Consumption
- 0.2 to 1 kg/m²
- Pack we stock
- 20 kg
- Colour
- 10 Red, 15 Sea Blue, 16 Dark Blue, 18 Dark Blue, 18 Light Green, Base T
Mapei document 00930
About Mapecoat TNS Color
A 20 kg bucket is let down with one to two litres of water and laid with a rubber squeegee, a mohair roller or an HVLP spray gun. On porous substrates the first coat takes 0.8 to 1 kg/m², on non porous ones 0.2 to 0.4 kg/m² followed by 0.2 to 0.3 kg/m². Drying runs 12 to 24 hours. Cementitious substrates must be primed, and the substrate itself has to sit between +10°C and +50°C.
Documentation
Related documentation
Technical data sheet
1.3 MB · PDF
Mapecoat TNS Color as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
40.0 to 50.0kg
- First coat on porous substrates: 0.8 to 1 kg/m2
- over 50 m2
Order 2 to 3 packs of 20 kg plastic bucket
Taken from the Mapecoat TNS Color data sheet: CONSUMPTION (referred to undiluted product): first coat 0.8-1 kg/m2 on porous substrates and 0.2-0.4 kg/m2 on non-porous; second coat 0.2-0.3 kg/m2 on non-porous. No site allowance is added unless you turn one on. Figures refer to the undiluted product. Each tier is one printed cell because the rate changes between the first and the second coat, so a two coat job is the first coat tier plus the second coat tier, not one tier doubled. The sheet prints no second coat rate for porous substrates. It asks for 1 coat as a filler undercoat, 2 as a colour coating and 3 for very bright colours.
Application
Where it is used.
- 01Filler undercoat for Mapecoat TNS RP matting
- 02Basketball and volleyball court coatings
- 03Skating areas and velodromes
- 04Multi purpose sports surfaces indoors and out
- 05Restoring surfaces already coated with synthetic resins
Specification
Technical data.
| Pack size | 20 kg |
|---|---|
| Colours | 10 Red, 15 Sea Blue, 16 Dark Blue, 18 Dark Blue, 18 Light Green, Base T |
| Consistency | thick liquid |
| Storage and shelf life | Mapecoat TNS Color remains stable for 24 months if stored in a dry place away from sources of heat at a temperature of +5°C to +30°C. Protect from frost. |
| Density | approx. 1.4 g/cm³ |
| Dry solids | approx. 68% |
| Elongation | 285% |
| Tensile strength | 0.6 N/mm² |
| Abrasion resistance | > 15,000 cycles |
| Thickness | S (EN ISO 7783-2): 0.29 m |
Typical values as Mapei prints them in the data sheet for Mapecoat TNS Color. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapecoat TNS Color remains stable for 24 months if stored in a dry place away from sources of heat at a temperature of +5°C to +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat TNS Color, a surface treatment manufactured by Mapei. Allow 0.2 to 1 kg/m2, as published by the manufacturer. Applied thickness S (EN ISO 7783-2): 0.29 m. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat TNS Color |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.2 to 1 kg/m2 |
| Thickness | S (EN ISO 7783-2): 0.29 m |
| Pack size | 20 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
20 kg
You can download the official Mapecoat TNS Color technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat TNS Color in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Color you need, or describe the job and we will work it out with you.

