
Mapei Surface TreatmentNo. 11 / 79
Mapecoat TNS Extreme Technical Data Sheet (TDS)
Surface Treatment to CE EN 1504-2 PI MC PR RC IR.
Driveways and cycle lanes are coated for grip and colour, not for looks alone. Mapecoat TNS Extreme is a two component quick drying epoxy acrylic resin in water dispersion with selected fillers, mixed 4 parts A to 96 parts B and laid at roughly 1.5 kg/m² in two coats over bituminous conglomerate.
- Colouring of driveways and vehicle traffic areas
- Cycle lanes and pedestrian areas
- Protective coating for concrete to EN 1504-2
- Multi sport area surfacing
- Surfaces needing wet slip resistance
Build a list across products and send it once, or ask about Mapecoat TNS Extreme on WhatsApp now.
- Class
- CE EN 1504-2 PI MC PR RC IR
- Consumption
- 0.4 to 1.2 kg/m²
- Pack we stock
- 0.67 kg
- Colour
- RAL 1001, RAL 1006, RAL 1013, RAL 1015, RAL 1023, RAL 5007, RAL 6037, 1 Light Grey
Mapei document 09273
About Mapecoat TNS Extreme
It is certified to EN 1504-2 as a protective coating for concrete, with pull off adhesion to EN 1542 of at least 1.5 N/mm², and it keeps its slip resistance when wet. Pot life is six hours, long for a reactive coating and useful across a large area. Eight RAL shades plus a light grey are listed. Quick drying earns its place in the UAE, where a trafficked area can be handed back the same day instead of closed overnight.
Documentation
Related documentation
Technical data sheet
1.6 MB · PDF
Mapecoat TNS Extreme as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
50.0 to 60.0kg
- Bituminous conglomerate surface, first coat: 1 to 1.2 kg/m2
- over 50 m2
Order 3 to 4 packs of 16.67 kg unit, component A 0.67 kg plus component B 16 kg
Taken from the Mapecoat TNS Extreme data sheet: CONSUMPTION for application with a trowel on an even surface: bituminous conglomerate first coat 1-1.20 kg/m2 and subsequent coats 0.40-0.60 kg/m2; smooth cementitious or non-absorbent first coat 0.40-0.60 kg/m2 and subsequent coats 0.40-0.60 kg/m2. No site allowance is added unless you turn one on. The sheet says apply at least 2 coats, and each tier is one printed cell, so a job is the first coat tier plus a subsequent coat tier. The technical data table also prints a combined figure of approx. 1.5 kg/m2 in two coats on bituminous conglomerate, against 1.4 to 1.8 kg/m2 if the two printed cells are added.
Application
Where it is used.
- 01Colouring of driveways and vehicle traffic areas
- 02Cycle lanes and pedestrian areas
- 03Protective coating for concrete to EN 1504-2
- 04Multi sport area surfacing
- 05Surfaces needing wet slip resistance
Specification
Technical data.
- CE EN 1504-2 PI MC PR RC IR
| Classification | CE EN 1504-2 PI MC PR RC IR |
|---|---|
| Coverage | approx. 1.5 kg/m² in two coats (on bituminous conglomerate |
| Pack size | 0.67 kg, 16 kg |
| Pot life | 6 hours |
| Set to light foot traffic | minimum 2 hours |
| Colours | RAL 1001, RAL 1006, RAL 1013, RAL 1015, RAL 1023, RAL 5007, RAL 6037, 1 Light Grey |
| Mixing ratio | by weight: A: B = 4 : 96 |
| Bond strength | by pull-off: EN 1542 ≥ 1.5 N/mm² |
| Consistency | liquid paste |
| Storage and shelf life | The product can be stored for 12 months in a dry place away from sources of heat at a temperature between +5°C and +30°C, which must be controlled also during transport. Protect from frost. |
| Density | approx. 1.11 g/cm³ approx. 1.40 g/cm³ |
| Dry solids | 71% |
Typical values as Mapei prints them in the data sheet for Mapecoat TNS Extreme. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
0.67 kg, 16 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
by weight: A: B = 4 : 96. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
6 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
The product can be stored for 12 months in a dry place away from sources of heat at a temperature between +5°C and +30°C, which must be controlled also during transport. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat TNS Extreme, a surface treatment manufactured by Mapei, classified CE EN 1504-2 PI MC PR RC IR. Allow 0.4 to 1.2 kg/m2, as published by the manufacturer. Mix at by weight: A: B = 4 : 96. Supplied in 0.67 kg, 16 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat TNS Extreme |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Classification | CE EN 1504-2 PI MC PR RC IR |
| Consumption | 0.4 to 1.2 kg/m2 |
| Pack size | 0.67 kg, 16 kg |
| Mixing ratio | by weight: A: B = 4 : 96 |
| Set time | minimum 2 hours |
| Pot life | 6 hours |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapecoat TNS Extreme is classified CE EN 1504-2 PI MC PR RC IR according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: approx. 1.5 kg/m² in two coats (on bituminous conglomerate
0.67 kg, 16 kg
You can download the official Mapecoat TNS Extreme technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat TNS Extreme in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Extreme you need, or describe the job and we will work it out with you.

