
Mapei Surface TreatmentNo. 12 / 79
Mapecoat TNS Finish 1 Technical Data Sheet (TDS)
Surface Treatment to ITF 1.
Court pace is a specification, not an accident. Mapecoat TNS Finish 1 is a coloured coating with selected aggregates for the multi layer Mapecoat TNS systems, classified ITF 1 at the slow end of the International Tennis Federation pace scale, where the aggregate loading is what holds the ball up.
- Tennis, padel and pickleball court finishes
- ITF 1 slow pace court specifications
- Finish coats over Mapecoat TNS systems
- Direct application on asphalt courts
- Coating cementitious court substrates
Build a list across products and send it once, or ask about Mapecoat TNS Finish 1 on WhatsApp now.
- Class
- ITF 1
- Consumption
- 0.4 to 1 kg/m²
- Pack we stock
- 20 kg
- Colour
- 0 White, 2 Dark Grey, 5 Ochre, 10 Red, 13 Turquoise, 14 Light Blue, 15 Sea Blue, 16 Dark Blue
Mapei document 12546
About Mapecoat TNS Finish 1
Over asphalt the first coat runs 0.8 to 1 kg/m² and the second 0.4 to 0.5 kg/m²; over an existing TNS system or a cementitious substrate both coats run 0.4 to 0.5 kg/m². Pull off adhesion to EN 1542 is at least 0.8 N/mm². Eight shades are listed, from white and dark grey through to sea blue. Supplied in 20 kg pails. Settle the pace classification with the UAE club before ordering, because the finish is what fixes it.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Mapecoat TNS Finish 1 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
40.0 to 50.0kg
- Direct application on asphalt, first coat: 0.8 to 1 kg/m2
- over 50 m2
Order 2 to 3 packs of 20 kg plastic bucket
Taken from the Mapecoat TNS Finish 1 data sheet: CONSUMPTION: direct application on asphalt, first coat 0.8-1 kg/m2 and second coat 0.4-0.5 kg/m2; on multilayer TNS systems or cementitious substrates, first coat 0.4-0.5 kg/m2 and second coat 0.4-0.5 kg/m2. No site allowance is added unless you turn one on. Each tier is one printed cell because the first coat on asphalt costs twice the second, so a two coat job is the first coat tier plus the second coat tier.
Application
Where it is used.
- 01Tennis, padel and pickleball court finishes
- 02ITF 1 slow pace court specifications
- 03Finish coats over Mapecoat TNS systems
- 04Direct application on asphalt courts
- 05Coating cementitious court substrates
Specification
Technical data.
- ITF 1
| Classification | ITF 1 |
|---|---|
| Coverage | Coats Consumption for direct application on asphalt Consumption for application on multilayer TNS systems or cementitious substrates First coat 0.8-1 kg/m 0.4-0.5 kg/m Second coat 0.4-0.5 kg/m 0.4-0.5 kg/m |
| Pack size | 20 kg |
| Colours | 0 White, 2 Dark Grey, 5 Ochre, 10 Red, 13 Turquoise, 14 Light Blue, 15 Sea Blue, 16 Dark Blue |
| Bond strength | by pull-off: EN 1542 adherence ≥ 0.8 N/mm² |
| Consistency | thick liquid |
| Storage and shelf life | 24 months in a cool, dry place away from sources of heat at a temperature between +5°C and +30°C. Protect from frost. |
| Density | approx. 1.40 g/cm³ |
| Dry solids | 70% |
| Abrasion resistance | > 15,000 cycles |
| Vapour resistance | 250 μ |
Typical values as Mapei prints them in the data sheet for Mapecoat TNS Finish 1. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in a cool, dry place away from sources of heat at a temperature between +5°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat TNS Finish 1, a surface treatment manufactured by Mapei, classified ITF 1. Allow 0.4 to 1 kg/m2, as published by the manufacturer. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat TNS Finish 1 |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Classification | ITF 1 |
| Consumption | 0.4 to 1 kg/m2 |
| Pack size | 20 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapecoat TNS Finish 1 is classified ITF 1 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Coats Consumption for direct application on asphalt Consumption for application on multilayer TNS systems or cementitious substrates First coat 0.8-1 kg/m 0.4-0.5 kg/m Second coat 0.4-0.5 kg/m 0.4-0.5 kg/m
20 kg
You can download the official Mapecoat TNS Finish 1 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat TNS Finish 1 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Finish 1 you need, or describe the job and we will work it out with you.

