
Mapei Surface TreatmentNo. 13 / 79
Mapecoat TNS Finish 3 Technical Data Sheet (TDS)
Surface Treatment to ITF 3.
Where a heavily filled finish slows a ball and a smoother one speeds it up, this is the middle setting. Mapecoat TNS Finish 3 is a coloured coating with selected aggregates for the multi layer Mapecoat TNS range, classified ITF 3 for medium court pace.
- Tennis, padel and pickleball court finishes
- ITF 3 medium pace court specifications
- Finish coats over Mapecoat TNS systems
- Recoating existing court coatings
- Coating cementitious court substrates
Build a list across products and send it once, or ask about Mapecoat TNS Finish 3 on WhatsApp now.
- Class
- ITF 3
- Consumption
- 0.6 to 0.7 kg/m² over 2 coats
- Pack we stock
- 20 kg
- Colour
- Base T, White
Mapei document 12557
About Mapecoat TNS Finish 3
Both coats run 0.3 to 0.35 kg/m², whether it is finishing a TNS system or going over an existing coating or a cementitious substrate, and consumption rises with the roughness beneath. It is supplied in 20 kg pails in Base T and White, Base T being the tintable shade. Shelf life is 24 months between +5°C and +30°C. Store pails inside on a UAE site rather than in a yard, because a closed container standing in direct sun passes the top of that range easily.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Mapecoat TNS Finish 3 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
Coats
The sheet calls for 1 to 2.
As published in the data sheet
30.0 to 35.0kg
- As a finish for Mapecoat TNS systems: 0.3 to 0.35 kg/m2
- 2 coats
- over 50 m2
Order 2 packs of 20 kg plastic bucket
Taken from the Mapecoat TNS Finish 3 data sheet: CONSUMPTION: 0.3-0.35 kg/m2 for the first coat and 0.3-0.35 kg/m2 for the second, both as a finish for Mapecoat TNS systems and on existing coatings or cementitious substrates. No site allowance is added unless you turn one on. The sheet prints the same rate for the first and the second coat in both columns, so the rate is per coat. Consumption is strongly influenced by the roughness of the substrate.
Application
Where it is used.
- 01Tennis, padel and pickleball court finishes
- 02ITF 3 medium pace court specifications
- 03Finish coats over Mapecoat TNS systems
- 04Recoating existing court coatings
- 05Coating cementitious court substrates
Specification
Technical data.
- ITF 3
| Classification | ITF 3 |
|---|---|
| Coverage | Coats Consumption as a finish for Mapecoat TNS systems Consumption for application on existing coatings or cementitious substrates First coat 0.3-0.35 kg/m 0.3-0.35 kg/m Second coat 0.3-0.35 kg/m 0.3-0.35 kg/m Consumption is strongly influenced by the roughness of the substrate. |
| Pack size | 20 kg |
| Colours | Base T, White |
| Consistency | thick liquid |
| Storage and shelf life | 24 months in a cool, dry place away from sources of heat at a temperature between +5°C and +30°C. Protect from frost. |
| Density | approx. 1.40 g/cm³ |
| Dry solids | 70% |
| Abrasion resistance | > 15,000 cycles |
| Vapour resistance | 250 μ |
Typical values as Mapei prints them in the data sheet for Mapecoat TNS Finish 3. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in a cool, dry place away from sources of heat at a temperature between +5°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat TNS Finish 3, a surface treatment manufactured by Mapei, classified ITF 3. Allow 0.6 to 0.7 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat TNS Finish 3 |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Classification | ITF 3 |
| Consumption | 0.6 to 0.7 kg/m2 over 2 coats |
| Pack size | 20 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapecoat TNS Finish 3 is classified ITF 3 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Coats Consumption as a finish for Mapecoat TNS systems Consumption for application on existing coatings or cementitious substrates First coat 0.3-0.35 kg/m 0.3-0.35 kg/m Second coat 0.3-0.35 kg/m 0.3-0.35 kg/m Consumption is strongly influenced by the roughness of the substrate.
20 kg
You can download the official Mapecoat TNS Finish 3 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat TNS Finish 3 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Finish 3 you need, or describe the job and we will work it out with you.

