
Mapei Surface TreatmentNo. 14 / 79
Mapecoat TNS Finish 4 Technical Data Sheet (TDS)
Surface Treatment to ITF 4.
Mapecoat TNS Finish 4 is the medium fast step in the Mapecoat TNS finish range, classified ITF 4, with a lighter aggregate loading than the slower grades and a correspondingly lower consumption of 0.3 kg/m² in each of two coats. It finishes multi layer TNS systems and also goes over existing coatings or cementitious substrates, with consumption strongly influenced by how rough the surface beneath it is.
- Tennis, padel and pickleball court finishes
- ITF 4 medium fast court specifications
- Finish coats over Mapecoat TNS systems
- Recoating existing court coatings
- RAL colour matched sports surfaces
Build a list across products and send it once, or ask about Mapecoat TNS Finish 4 on WhatsApp now.
- Class
- ITF 4
- Consumption
- 0.6 kg/m² over 2 coats
- Pack we stock
- 20 kg
- Colour
- RAL 000 70 00, RAL 000 85 00, RAL 010 70 35, RAL 085 80 60, RAL 090 90 30, RAL 130 90 20, RAL 210 90 10, RAL 220 80 15
Mapei document 12558
About Mapecoat TNS Finish 4
Eight shades are listed in the RAL design system, so a court can be matched to a club scheme rather than to a standard palette. Supplied in 20 kg pails with a 24 month shelf life. Settle pace, colour and slip before the base coat goes down, because changing the finish later means recoating a whole UAE court rather than patching it.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Mapecoat TNS Finish 4 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Revision 10-2025 · 0.2 MB · PDF
For the method statement and the site file.
DownloadSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
Coats
The sheet calls for 1 to 2.
As published in the data sheet
30.0kg
- As a finish for Mapecoat TNS systems: 0.3 kg/m2
- 2 coats
- over 50 m2
Order 2 packs of 20 kg plastic bucket
Taken from the Mapecoat TNS Finish 4 data sheet: CONSUMPTION: 0.3 kg/m2 for the first coat and 0.3 kg/m2 for the second, both as a finish for Mapecoat TNS systems and on existing coatings or cementitious substrates. No site allowance is added unless you turn one on. The sheet prints the same rate for the first and the second coat in both columns, so the rate is per coat. Consumption is strongly influenced by the roughness of the substrate.
Application
Where it is used.
- 01Tennis, padel and pickleball court finishes
- 02ITF 4 medium fast court specifications
- 03Finish coats over Mapecoat TNS systems
- 04Recoating existing court coatings
- 05RAL colour matched sports surfaces
Specification
Technical data.
- ITF 4
| Classification | ITF 4 |
|---|---|
| Coverage | Coats Consumption as a finish for Mapecoat TNS systems Consumption for application on existing coatings or cementitious substrates First coat 0.3 kg/m 0.3 kg/m Second coat 0.3 kg/m 0.3 kg/m Consumption is strongly influenced by the roughness of the substrate. |
| Pack size | 20 kg |
| Colours | RAL 000 70 00, RAL 000 85 00, RAL 010 70 35, RAL 085 80 60, RAL 090 90 30, RAL 130 90 20, RAL 210 90 10, RAL 220 80 15 |
| Consistency | thick liquid |
| Storage and shelf life | 24 months in a cool, dry place away from sources of heat at a temperature between +5°C and +30°C. Protect from frost. 2 2 2 2 |
| Density | approx. 1.40 g/cm³ |
| Dry solids | 70% |
| Abrasion resistance | > 15,000 cycles |
| Vapour resistance | 250 μ |
Typical values as Mapei prints them in the data sheet for Mapecoat TNS Finish 4. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in a cool, dry place away from sources of heat at a temperature between +5°C and +30°C. Protect from frost. 2 2 2 2 in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat TNS Finish 4, a surface treatment manufactured by Mapei, classified ITF 4. Allow 0.6 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat TNS Finish 4 |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Classification | ITF 4 |
| Consumption | 0.6 kg/m2 over 2 coats |
| Pack size | 20 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapecoat TNS Finish 4 is classified ITF 4 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Coats Consumption as a finish for Mapecoat TNS systems Consumption for application on existing coatings or cementitious substrates First coat 0.3 kg/m 0.3 kg/m Second coat 0.3 kg/m 0.3 kg/m Consumption is strongly influenced by the roughness of the substrate.
20 kg
You can download the official Mapecoat TNS Finish 4 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat TNS Finish 4 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Finish 4 you need, or describe the job and we will work it out with you.

