
Mapei Surface TreatmentNo. 15 / 79
Mapecoat TNS Line Technical Data Sheet (TDS)
Mapei surface treatment.
Marking out is the last operation on a court and the one everybody looks at. Mapecoat TNS Line is an acrylic paint in water dispersion with selected fillers, brushed, rolled or sprayed over fully dry Mapecoat TNS finishes in one or two coats at 0.2 to 0.4 kg/m² for the pair, with 12 to 24 hours between them.
- Playing lines on Mapecoat TNS surfaces
- Marking playing areas on uncoated paving
- Line marking directly on bituminous conglomerate
- Line marking on concrete after priming
- Painting small pedestrian areas
Build a list across products and send it once, or ask about Mapecoat TNS Line on WhatsApp now.
- Consumption
- 0.2 to 0.4 kg/m²
- Pack we stock
- 5 kg
- Colour
- 0 White, 3 Yellow, Base T, White
Mapei document 00923
About Mapecoat TNS Line
Brushing gives the cleanest edge and the most even film. It also marks uncoated paving: straight onto new bituminous conglomerate with no primer, or onto concrete after Mapecoat TNS Primer EPW diluted 1:0.5. Mapecoat TNS Line Seal underneath improves how well the line seals. Damp abrasion resistance is quoted above 10,000 cycles, yet Mapei rules the paint out on surfaces taking heavy traffic. Keep the substrate under +50°C, which on an exposed UAE court means a morning start.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Mapecoat TNS Line as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
10.0 to 20.0kg
- Two coats of the product: 0.2 to 0.4 kg/m2
- over 50 m2
Order 2 to 4 packs of 5 kg plastic drum
Taken from the Mapecoat TNS Line data sheet: CONSUMPTION: 0.2-0.4 kg/m2 (for two coats of the product). No site allowance is added unless you turn one on. The printed figure is the total for two coats, so it is not multiplied by a coat count. The painting cycle is 1 or 2 coats depending on the dilution.
Application
Where it is used.
- 01Playing lines on Mapecoat TNS surfaces
- 02Marking playing areas on uncoated paving
- 03Line marking directly on bituminous conglomerate
- 04Line marking on concrete after priming
- 05Painting small pedestrian areas
Specification
Technical data.
| Coverage | 0.2-0.4 kg/m² (for two coats of the product). |
|---|---|
| Pack size | 5 kg |
| Set to light foot traffic | 12-24 hours under normal conditions of temperature |
| Colours | 0 White, 3 Yellow, Base T, White |
| Consistency | pasty liquid |
| Storage and shelf life | 24 months if stored in a dry place away from sources of heat at a temperature of between +5°C and +30°C. Protect from freezing weather. |
| Abrasion resistance | > 10,000 |
| Density | approx. 1.40 g/cm³ |
| Dry solids | approx. 65 % |
Typical values as Mapei prints them in the data sheet for Mapecoat TNS Line. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months if stored in a dry place away from sources of heat at a temperature of between +5°C and +30°C. Protect from freezing weather. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat TNS Line, a surface treatment manufactured by Mapei. Allow 0.2 to 0.4 kg/m2, as published by the manufacturer. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat TNS Line |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.2 to 0.4 kg/m2 |
| Pack size | 5 kg |
| Set time | 12-24 hours under normal conditions of temperature |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 0.2-0.4 kg/m² (for two coats of the product).
5 kg
You can download the official Mapecoat TNS Line technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat TNS Line in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Line you need, or describe the job and we will work it out with you.

