
Mapei Surface TreatmentNo. 16 / 79
Mapecoat TNS Paint Technical Data Sheet (TDS)
Mapei surface treatment.
Above Mapecoat TNS Color sits the coat that carries both the colour and the wear. Mapecoat TNS Paint is a coloured waterborne acrylic coating with selected fillers for the multi layer Mapecoat TNS range, laid by rubber trowel, mohair roller or airless spray from 20 kg tubs let down with one to two litres of water per coat.
- Basketball, volleyball and futsal court coatings
- Skating areas and velodromes
- Restoring sports surfaces coated with synthetic resins
- Colouring porous cementitious tennis courts
- Pedestrian areas and cycle lanes
Build a list across products and send it once, or ask about Mapecoat TNS Paint on WhatsApp now.
- Consumption
- 0.4 to 0.8 kg/m² over 2 coats
- Pack we stock
- 20 kg
- Colour
- 10 Red, 15 Sea Blue, Base T
Mapei document 00579
About Mapecoat TNS Paint
Over Mapecoat TNS Color the first coat runs 0.20 to 0.25 kg/m², on a non porous substrate both coats run 0.20 to 0.25 kg/m², and on pervious concrete both rise to 0.3 to 0.4 kg/m². Elongation at break is 340 per cent and damp abrasion resistance better than 15,000 cycles. Drying takes 12 to 24 hours. Concrete must be primed, cured 28 days and under 3 per cent moisture, with the substrate between +10°C and +50°C.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Mapecoat TNS Paint as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
Coats
The sheet calls for 1 to 2.
As published in the data sheet
30.0 to 40.0kg
- On pervious concrete substrates, per coat: 0.3 to 0.4 kg/m2
- 2 coats
- over 50 m2
Order 2 packs of 20 kg plastic tub
Taken from the Mapecoat TNS Paint data sheet: CONSUMPTION (referred to undiluted product): on Mapecoat TNS Color first coat 0.20-0.25 kg/m2; on non-porous substrates first and second coat 0.20-0.25 kg/m2; on pervious concrete substrates first and second coat 0.3-0.4 kg/m2. No site allowance is added unless you turn one on. Figures refer to the undiluted product. The coat count applies to the two substrate tiers, where the sheet prints the same rate for both coats. Over Mapecoat TNS Color the sheet prints a first coat only, so leave the coats at 1 for that tier.
Application
Where it is used.
- 01Basketball, volleyball and futsal court coatings
- 02Skating areas and velodromes
- 03Restoring sports surfaces coated with synthetic resins
- 04Colouring porous cementitious tennis courts
- 05Pedestrian areas and cycle lanes
Specification
Technical data.
| Pack size | 20 kg |
|---|---|
| Colours | 10 Red, 15 Sea Blue, Base T |
| Consistency | thick liquid |
| Storage and shelf life | Mapecoat TNS Paint remains stable for 24 months if stored in a dry place away from sources of heat at a temperature of +5°C to +30°C. Protect from frost. |
| Density | approx. 1.36 g/cm³ |
| Dry solids | approx. 63% |
| Elongation | 340% |
| Tensile strength | 1.0 N/mm² |
| Abrasion resistance | > 15,000 cycles |
Typical values as Mapei prints them in the data sheet for Mapecoat TNS Paint. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapecoat TNS Paint remains stable for 24 months if stored in a dry place away from sources of heat at a temperature of +5°C to +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat TNS Paint, a surface treatment manufactured by Mapei. Allow 0.4 to 0.8 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat TNS Paint |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.4 to 0.8 kg/m2 over 2 coats |
| Pack size | 20 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
20 kg
You can download the official Mapecoat TNS Paint technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat TNS Paint in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat TNS Paint you need, or describe the job and we will work it out with you.

