
Mapei Flooring SystemNo. 33 / 79
Mapefloor Finish 415 ME Technical Data Sheet (TDS)
Mapei flooring system.
Finishes in a resin build up split into two families, and this one belongs indoors or beneath another coat. Mapefloor Finish 415 ME is a two component aromatic polyurethane finish, coloured, flexible and wear resistant, mixed 80 parts A to 20 parts B and applied at a theoretical 0.3 to 0.8 kg/m².
- Intermediate multi storey car park decks
- Industrial resin flooring finishes
- Flexible wear resistant polyurethane coats
- Enclosed decks not exposed to sunlight
- Coloured industrial floor finishes
Build a list across products and send it once, or ask about Mapefloor Finish 415 ME on WhatsApp now.
- Consumption
- 0.3 to 0.8 kg/m²
- Pack we stock
- 12.5 kg
- Colour
- RAL 3007, RAL 3009, RAL 3011, RAL 3014, RAL 3016, RAL 3020, RAL 4005, RAL 5007
Mapei document 06796 · revision 4-2023
About Mapefloor Finish 415 ME
Aromatic chemistry is tough but not ultraviolet stable, so it belongs on intermediate car park decks and enclosed industrial floors rather than on an exposed top deck where an aliphatic grade is required. Flexibility is why polyurethane is used here instead of epoxy: it moves with a deck instead of cracking along it. Gel time is 60 minutes at +23°C and set time 24 hours. Store the 12.5 kg kit between +15°C and +35°C, not in a UAE yard.
Documentation
Related documentation
Technical data sheet
Revision 4-2023 · 0.8 MB · PDF
Mapefloor Finish 415 ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
15.0 to 40.0kg
- Theoretical consumption, by system: 0.3 to 0.8 kg/m2
- over 50 m2
Order 2 to 4 packs of 12.5 kg kit of components A and B
Taken from the Mapefloor Finish 415 ME data sheet: CONSUMPTION: theoretical consumption 0.3 to 0.8 kg/m2 depending on the selected system. No site allowance is added unless you turn one on. Consumption depends on the roughness of the substrate, the surrounding temperature and the type of tool used. The figures are theoretical and are for a substrate between +15 and +35 degrees C; lower temperatures increase both the consumption and the hardening time. The sheet recommends preliminary tests to establish the real rate. The range also moves with the particle size of the broadcast quartz sand under the finish. The kit is 10 kg of A plus 2.5 kg of B.
Application
Where it is used.
- 01Intermediate multi storey car park decks
- 02Industrial resin flooring finishes
- 03Flexible wear resistant polyurethane coats
- 04Enclosed decks not exposed to sunlight
- 05Coloured industrial floor finishes
Where it is not the right product
- As a final exposed coat, because an aromatic polyurethane is not UV stable and needs a top coat
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 13813
| Coverage | 0.3-0.8 kg/m² |
|---|---|
| Pack size | 12.5 kg |
| Pot life | at +23°C (gel time): 60 min |
| Set to light foot traffic | at +23°C: 24 h |
| Colours | RAL 3007, RAL 3009, RAL 3011, RAL 3014, RAL 3016, RAL 3020, RAL 4005, RAL 5007 |
| Mixing ratio | comp. A : comp. B = 80 : 20 |
| Application temperature | from +10°C to +35°C |
| Consistency | thick liquid (paste) liquid |
| Storage and shelf life | Store the product in a covered, dry place at a temperature of between +15°C and +35°C. The product may be stored for 12 months in such conditions. |
| Density | 1.40 1.20 g/cm³ |
Typical values as Mapei prints them in the data sheet for Mapefloor Finish 415 ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
12.5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
comp. A : comp. B = 80 : 20. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
at +23°C (gel time): 60 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Store the product in a covered, dry place at a temperature of between +15°C and +35°C. The product may be stored for 12 months in such conditions. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor Finish 415 ME, a flooring system manufactured by Mapei. Allow 0.3 to 0.8 kg/m2, as published by the manufacturer. Mix at comp. A : comp. B = 80 : 20. Supplied in 12.5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor Finish 415 ME |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Consumption | 0.3 to 0.8 kg/m2 |
| Pack size | 12.5 kg |
| Mixing ratio | comp. A : comp. B = 80 : 20 |
| Set time | at +23°C: 24 h |
| Pot life | at +23°C (gel time): 60 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 0.3-0.8 kg/m²
12.5 kg
You can download the official Mapefloor Finish 415 ME technical data sheet as a PDF directly from this page, revision 4-2023, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapefloor Finish 415 ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor Finish 415 ME you need, or describe the job and we will work it out with you.

