Mapefloor Finish 450 ME flooring system pack
Mapei's own picture. The pack we stock: 18.90 kg.

Mapei Flooring SystemNo. 34 / 79

Mapefloor Finish 450 ME Technical Data Sheet (TDS)

Mapei flooring system.

On a top deck the sun is the design load. Mapefloor Finish 450 ME is a two component aliphatic polyurethane finish, coloured, elastic and resistant to both wear and ultraviolet light, mixed 84 parts A to 16 parts B and applied as a fluid paste.

  • Exposed multi storey car park decks
  • Industrial resin flooring finishes
  • UV resistant coloured polyurethane topcoats
  • Decks subject to thermal movement
  • Traffic coating systems
Data sheet0.8 MB

Build a list across products and send it once, or ask about Mapefloor Finish 450 ME on WhatsApp now.

Consumption
0.2 to 0.5 kg/m²
Pack we stock
18.90 kg
Colour
RAL 1001, RAL 1004, RAL 1011, RAL 1014, RAL 1015, RAL 1017, RAL 1018, RAL 1019

Mapei document 08913

About Mapefloor Finish 450 ME

Aliphatic is the distinction that decides it: the colour holds outdoors where an aromatic finish chalks, so this is the grade for an exposed car park deck or any industrial floor open to the sky. It stays elastic, bridging the small movements a suspended deck makes under traffic and thermal cycling. Pot life is four hours and set time 24 hours, with application from +10°C to +35°C. A long pot life is worth having on a large Gulf deck coated in a single visit.

Documentation

Related documentation

  • Technical data sheet

    0.8 MB · PDF

    Mapefloor Finish 450 ME as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

10.0 to 25.0kg

  • Theoretical consumption, by system: 0.2 to 0.5 kg/m2
  • over 50 m2

Order 1 to 2 packs of 22.5 kg kit (18.90 kg of A plus 3.60 kg of B)

Send this quantity for a quote

Taken from the Mapefloor Finish 450 ME data sheet: CONSUMPTION: theoretical consumption 0.2 to 0.5 kg/m2 depending on the selected system. No site allowance is added unless you turn one on. Consumption depends on the roughness of the substrate, the surrounding temperature and the type of tool used. The figures are theoretical and are for a substrate between +15 and +35 degrees C; lower temperatures increase both the consumption and the hardening time. The sheet recommends preliminary tests to establish the real rate. The sheet lists the two components separately, 18.90 kg of A and 3.60 kg of B, rather than naming a kit weight.

Application

Where it is used.

  1. 01Exposed multi storey car park decks
  2. 02Industrial resin flooring finishes
  3. 03UV resistant coloured polyurethane topcoats
  4. 04Decks subject to thermal movement
  5. 05Traffic coating systems

Where it is not the right product

  • As a final exposed coat, because an aromatic polyurethane is not UV stable and needs a top coat

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • EN 13813
Mapefloor Finish 450 ME technical specifications from the manufacturer TDS
Coverage0.2-0.5 kg/m²
Pack size18.90 kg, 3.60 kg
Pot life4 hours
Set to light foot traffic24 h
ColoursRAL 1001, RAL 1004, RAL 1011, RAL 1014, RAL 1015, RAL 1017, RAL 1018, RAL 1019
Mixing ratiocomp. A:comp. B = 84:16
Application temperaturefrom +10°C to +35°C
Consistencyfluid paste
Storage and shelf lifeStore the product in a covered, dry place at a temperature of between +15°C and +35°C. The product may be stored for 12 months in such conditions.
Density1.25/1.35 1.06/1.12

Typical values as Mapei prints them in the data sheet for Mapefloor Finish 450 ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

18.90 kg, 3.60 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

comp. A:comp. B = 84:16. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

4 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Store the product in a covered, dry place at a temperature of between +15°C and +35°C. The product may be stored for 12 months in such conditions. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapefloor Finish 450 ME, a flooring system manufactured by Mapei. Allow 0.2 to 0.5 kg/m2, as published by the manufacturer. Mix at comp. A:comp. B = 84:16. Supplied in 18.90 kg, 3.60 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapefloor Finish 450 ME
ProductMapefloor Finish 450 ME
ManufacturerMapei
TypeFlooring System
Consumption0.2 to 0.5 kg/m2
Pack size18.90 kg, 3.60 kg
Mixing ratiocomp. A:comp. B = 84:16
Set time24 h
Pot life4 hours
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 0.2-0.5 kg/m²

18.90 kg, 3.60 kg

You can download the official Mapefloor Finish 450 ME technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapefloor Finish 450 ME in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor Finish 450 ME you need, or describe the job and we will work it out with you.

Chat on WhatsApp