
Mapei Flooring SystemNo. 36 / 79
Mapefloor Finish 460 ME Technical Data Sheet (TDS)
Mapei flooring system.
Mapefloor Finish 460 ME is a two component aliphatic polyurethane finish, coloured, elastic and resistant to wear and ultraviolet light, mixed by weight at 70 parts A to 30 parts B and supplied in 14 kg kits. It is the top layer of industrial resin floors and multi storey car park systems, the coat that takes the traffic and the sunlight so the layers beneath it do not.
- Topcoat for industrial resin flooring
- Multi storey car park deck systems
- UV resistant coloured polyurethane finishes
- Decks subject to traffic and thermal movement
- Exposed exterior resin floors
Build a list across products and send it once, or ask about Mapefloor Finish 460 ME on WhatsApp now.
- Consumption
- 0.2 to 0.5 kg/m²
- Pack we stock
- 14 kg
- Colour
- RAL 5012, RAL 6024, RAL 7001, RAL 7011, RAL 7037, RAL 7040, RAL 9003
Mapei document 12087 · revision 10-2026
About Mapefloor Finish 460 ME
Consumption depends on substrate roughness, ambient temperature and the tool used, and the quoted figures assume a substrate between +15°C and +35°C, with lower temperatures pushing consumption up. Pot life is about 60 minutes and the finish sets in 24 hours. Seven RAL shades are listed. Twelve months of shelf life between +15°C and +35°C means a UAE store room, not a site container.
Documentation
Related documentation
Technical data sheet
Revision 10-2026 · 0.5 MB · PDF
Mapefloor Finish 460 ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
10.0 to 25.0kg
- Theoretical consumption, by system: 0.2 to 0.5 kg/m2
- over 50 m2
Order 1 to 2 packs of 20 kg kit of components A and B
Taken from the Mapefloor Finish 460 ME data sheet: CONSUMPTION: theoretical consumption 0.2 to 0.5 kg/m2 depending on the selected system. No site allowance is added unless you turn one on. Consumption depends on the roughness of the substrate, the surrounding temperature and the type of tool used. The figures are theoretical and are for a substrate between +15 and +35 degrees C; lower temperatures increase both the consumption and the hardening time. The sheet recommends preliminary tests to establish the real rate. The kit is 14 kg of A plus 6 kg of B.
Application
Where it is used.
- 01Topcoat for industrial resin flooring
- 02Multi storey car park deck systems
- 03UV resistant coloured polyurethane finishes
- 04Decks subject to traffic and thermal movement
- 05Exposed exterior resin floors
Specification
Technical data.
- EN 13813
| Coverage | 0.2-0.5 kg/m² |
|---|---|
| Pack size | 14 kg |
| Pot life | approx. 60 mins |
| Set to light foot traffic | 24 hours |
| Colours | RAL 5012, RAL 6024, RAL 7001, RAL 7011, RAL 7037, RAL 7040, RAL 9003 |
| Mixing ratio | by weight: comp. A : comp. B = 70 : 30 |
| Consistency | liquid liquid |
| Storage and shelf life | 12 months in its original, sealed packaging, in a covered, dry place at a temperature between +15°C and +35°C. Protect from frost. |
| Density | 1.6 1.08 g/cm³ |
Typical values as Mapei prints them in the data sheet for Mapefloor Finish 460 ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
by weight: comp. A : comp. B = 70 : 30. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 60 mins. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in its original, sealed packaging, in a covered, dry place at a temperature between +15°C and +35°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor Finish 460 ME, a flooring system manufactured by Mapei. Allow 0.2 to 0.5 kg/m2, as published by the manufacturer. Mix at by weight: comp. A : comp. B = 70 : 30. Supplied in 14 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor Finish 460 ME |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Consumption | 0.2 to 0.5 kg/m2 |
| Pack size | 14 kg |
| Mixing ratio | by weight: comp. A : comp. B = 70 : 30 |
| Set time | 24 hours |
| Pot life | approx. 60 mins |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 0.2-0.5 kg/m²
14 kg
You can download the official Mapefloor Finish 460 ME technical data sheet as a PDF directly from this page, revision 10-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapefloor Finish 460 ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor Finish 460 ME you need, or describe the job and we will work it out with you.

