
Mapei Flooring SystemNo. 37 / 79
Mapefloor Finish 52 W Technical Data Sheet (TDS)
Mapei flooring system.
Dust and oil are the two things that spoil a working floor between cleans. Mapefloor Finish 52 W is a two component polyurethane finishing product in water dispersion, mixed 87 parts A to 13 parts B and rolled at 50 to 150 g/m² per coat as an anti dust and anti oil treatment.
- Anti dust treatment of concrete floors
- Anti oil protection of working floors
- Protective finish over resin systems
- Industrial resin flooring maintenance
- Occupied warehouses and workshops
Build a list across products and send it once, or ask about Mapefloor Finish 52 W on WhatsApp now.
- Consumption
- 0.1 to 0.3 kg/m² over 2 coats
- Pack we stock
- 5.4 kg
- Colour
- opalescent straw-coloured
Mapei document 02037
About Mapefloor Finish 52 W
It is formulated with low yellowing properties, so the opalescent straw coloured film stays close to how it looked on the day it went down. At that consumption it is a thin protective layer rather than a build coat, applied over a sound floor or resin system to make it easier to clean and harder to mark. It sets in 12 hours. Water dispersion means low odour, which decides it for an occupied UAE warehouse or workshop.
Documentation
Related documentation
Technical data sheet
1.1 MB · PDF
Mapefloor Finish 52 W as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
5.00 to 15.0kg
- Per coat, by substrate: 0.05 to 0.15 kg/m2
- 2 coats
- over 50 m2
Order 1 to 3 packs of 5.4 kg kit of components A and B
Taken from the Mapefloor Finish 52 W data sheet: CONSUMPTION: 50 to 150 g/m2 per coat, depending on the characteristics of the substrate. No site allowance is added unless you turn one on. The sheet prints 50 to 150 g/m2, which is 0.05 to 0.15 kg/m2, and the figure is per coat. It gives a waiting time between coats of 6 to 24 hours, so two coats is the normal build and the default here. The kit is 4.7 kg of A plus 0.7 kg of B.
Application
Where it is used.
- 01Anti dust treatment of concrete floors
- 02Anti oil protection of working floors
- 03Protective finish over resin systems
- 04Industrial resin flooring maintenance
- 05Occupied warehouses and workshops
Specification
Technical data.
- EN 13813
| Coverage | 50-150 g/m² per coat, depending on the characteristics of the substrate. |
|---|---|
| Pack size | 5.4 kg |
| Set to light foot traffic | 12 hours |
| Colours | opalescent straw-coloured |
| Mixing ratio | by weight: comp. A : comp. B : = 87 : 13 |
| Consistency | liquid liquid |
| Storage and shelf life | 12 months in its original, sealed packaging, in a dry place and at a temperature between +12°C and +30°C. Protect from frost. |
| Density | 1.035-1.100 g/cm³ 1.11-1.18 g/cm³ |
Typical values as Mapei prints them in the data sheet for Mapefloor Finish 52 W. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5.4 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
by weight: comp. A : comp. B : = 87 : 13. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in its original, sealed packaging, in a dry place and at a temperature between +12°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor Finish 52 W, a flooring system manufactured by Mapei. Allow 0.1 to 0.3 kg/m2 over 2 coats, as published by the manufacturer. Mix at by weight: comp. A : comp. B : = 87 : 13. Supplied in 5.4 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor Finish 52 W |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Consumption | 0.1 to 0.3 kg/m2 over 2 coats |
| Pack size | 5.4 kg |
| Mixing ratio | by weight: comp. A : comp. B : = 87 : 13 |
| Set time | 12 hours |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 50-150 g/m² per coat, depending on the characteristics of the substrate.
5.4 kg
You can download the official Mapefloor Finish 52 W technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapefloor Finish 52 W in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor Finish 52 W you need, or describe the job and we will work it out with you.

