
Mapei Surface TreatmentNo. 41 / 79
Mapefloor I 300 SL ME Technical Data Sheet (TDS)
Mapei surface treatment.
Read this as the body of a floor rather than a coat on one. Mapefloor I 300 SL ME is a three component coloured epoxy of high solids content, poured out and spread with a V notched trowel to form a self levelling layer 2 to 4 mm thick, then back rolled with a spiked roller to drive out entrained air.
- Floors in the chemical and pharmaceutical industries
- Floors in the foodstuffs industry
- Laboratories, sterile rooms and hospitals
- Aseptic rooms
- Mechanised warehouses
- Shopping centre floors
Build a list across products and send it once, or ask about Mapefloor I 300 SL ME on WhatsApp now.
- Coverage
- 0.3-3.7 kg/m²
- Pack we stock
- 16 kg
- Colour
- RAL 1000, RAL 1001, RAL 1002, RAL 1004, RAL 1011, RAL 1013, RAL 1014, RAL 1015
Mapei document 06797 · revision 6-2019
About Mapefloor I 300 SL ME
It always follows Primer SN broadcast with Quartz 0.5 at about 0.3 kg/m², with roughly 3.7 kg/m² of resin for a 2 mm floor and a total never below 2.5 to 3.5 kg/m². The 47 kg kit splits 17, 5 and 25 kg. Compressive strength reaches 50 N/mm². Workability is 35 minutes at +20°C and foot traffic returns at 24 hours. Sunlight fades the colour without harming it, so keep this grade for interiors.
Documentation
Related documentation
Technical data sheet
Revision 6-2019 · 2.7 MB · PDF
Mapefloor I 300 SL ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
Mapefloor I 300 SL ME is applied as a system of layers, and each layer has its own consumption rate. There is no single figure to multiply an area by, so the schedule is reproduced here as the sheet states it. Ask us and we will price the whole build up.
- Primer SN (A+B)another product
- 0.3 kg/m2
- Quartz 0.5 broadcast over the primeranother product
- 0.7-1.0 kg/m2
- Mapefloor I 300 SL ME, smooth self-levelling at average 2 mm
- 3.7 kg/m2
Taken from the Mapefloor I 300 SL ME data sheet: CONSUMPTION, smooth self-levelling average thickness 2 mm: Primer SN (A+B) 0.3 kg/m2, Mapefloor I 300 SL ME 3.7 kg/m2.
Application
Where it is used.
- 01Floors in the chemical and pharmaceutical industries
- 02Floors in the foodstuffs industry
- 03Laboratories, sterile rooms and hospitals
- 04Aseptic rooms
- 05Mechanised warehouses
- 06Shopping centre floors
Specification
Technical data.
| Coverage | Smooth self-levelling average thickness 2 mm. Primer SN (A+B) : 0.3 kg/m². Mapefloor I300 SL ME: 3.7 kg/m². The consumption rates above are theoretical calculated for the dry shake finish and are influenced by the condition of the surface to be treated, absorbency, roughness, the actual conditions o |
|---|---|
| Pack size | 16 kg, 25 kg, 47 kg, 17 kg |
| Colours | RAL 1000, RAL 1001, RAL 1002, RAL 1004, RAL 1011, RAL 1013, RAL 1014, RAL 1015 |
| Application temperature | from +8°C to +35°C |
| Consistency | fluid |
| Storage and shelf life | The product must be+ stored in its original packaging in a dry place at a temperature of between +5°C and +35°C. Maximum 24 months. |
| Density | 1.85 kg/m³ |
| Tensile strength | 16 BS6319-7 |
Typical values as Mapei prints them in the data sheet for Mapefloor I 300 SL ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
16 kg, 25 kg, 47 kg, 17 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
The product must be+ stored in its original packaging in a dry place at a temperature of between +5°C and +35°C. Maximum 24 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor I 300 SL ME, a surface treatment manufactured by Mapei. Supplied in 16 kg, 25 kg, 47 kg, 17 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor I 300 SL ME |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Pack size | 16 kg, 25 kg, 47 kg, 17 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Smooth self-levelling average thickness 2 mm. Primer SN (A+B) : 0.3 kg/m². Mapefloor I300 SL ME: 3.7 kg/m². The consumption rates above are theoretical calculated for the dry shake finish and are influenced by the condition of the surface to be treated, absorbency, roughness, the actual conditions o
16 kg, 25 kg, 47 kg, 17 kg
You can download the official Mapefloor I 300 SL ME technical data sheet as a PDF directly from this page, revision 6-2019, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapefloor I 300 SL ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor I 300 SL ME you need, or describe the job and we will work it out with you.

