
Mapei Surface TreatmentNo. 42 / 79
Mapefloor I 300 SL TRP Technical Data Sheet (TDS)
Mapei surface treatment.
Some decorative floors need the layers beneath them to stay visible. Mapefloor I 300 SL TRP is a two component transparent non yellowing epoxy coating applied at about 1 mm, using roughly 1.1 kg/m² to reach that thickness, mixed 100 parts A to 50 parts B by weight.
- Finishing coats on epoxy resin systems
- Decorative cementitious and resin flooring
- Self levelling transparent resin compounds
- Coloured quartz and flake floor finishes
- Industrial resin flooring interiors
Build a list across products and send it once, or ask about Mapefloor I 300 SL TRP on WhatsApp now.
- Consumption
- 1.1 kg/m² per mm
- Pack we stock
- 12 kg
- Colour
- transparent/opalescent transparent
Mapei document 02051
About Mapefloor I 300 SL TRP
It is a finishing coat over epoxy resin systems, used where a coloured quartz, flake or decorative layer has to read through a clear seamless surface. Self levelling at that thickness means no trowel marks and no joints for dirt to collect in. Non yellowing is the detail that protects the appearance of what is underneath. Supplied in 12 kg and 6 kg units with 24 months of shelf life, ideally stored between +15°C and +20°C rather than in a UAE site store.
Documentation
Related documentation
Technical data sheet
0.6 MB · PDF
Mapefloor I 300 SL TRP as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 1 mm.
As published in the data sheet
55.0kg
- 1.1 kg/m2 per mm
- 1 mm thick
- over 50 m2
Order 4 packs of 18 kg kit, component A 12 kg plus component B 6 kg
Taken from the Mapefloor I 300 SL TRP data sheet: CONSUMPTION: Mapefloor I 300 SL TRP approx. 1.1 kg/m2 to form a 1 mm thick coat. No site allowance is added unless you turn one on. The product is a top self-levelling layer of approx. 1 mm and the sheet says not to exceed the indicated thickness, so the thickness is fixed at 1 mm rather than open.
Application
Where it is used.
- 01Finishing coats on epoxy resin systems
- 02Decorative cementitious and resin flooring
- 03Self levelling transparent resin compounds
- 04Coloured quartz and flake floor finishes
- 05Industrial resin flooring interiors
Specification
Technical data.
| Coverage | Mapefloor I 300 SL TRP: approx. 1.1 kg/m² to form a 1 mm thick coat. |
|---|---|
| Pack size | 12 kg, 6 kg |
| Colours | transparent/opalescent transparent |
| Mixing ratio | by weight: component A : component B = 100 : 50 |
| Consistency | fluid fluid |
| Storage and shelf life | 24 months in its original sealed packaging in a dry place at a temperature of between +5°C and +35°C. The ideal temperature is from +15°C to +20°C. Protect from frost. |
| Density | 1.05-1.15 g/cm³ 0.99-1.05 g/cm³ |
Typical values as Mapei prints them in the data sheet for Mapefloor I 300 SL TRP. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
12 kg, 6 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
by weight: component A : component B = 100 : 50. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
24 months in its original sealed packaging in a dry place at a temperature of between +5°C and +35°C. The ideal temperature is from +15°C to +20°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor I 300 SL TRP, a surface treatment manufactured by Mapei. Allow 1.1 kg/m2 per mm, as published by the manufacturer. Mix at by weight: component A : component B = 100 : 50. Supplied in 12 kg, 6 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor I 300 SL TRP |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 1.1 kg/m2 per mm |
| Pack size | 12 kg, 6 kg |
| Mixing ratio | by weight: component A : component B = 100 : 50 |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Mapefloor I 300 SL TRP: approx. 1.1 kg/m² to form a 1 mm thick coat.
12 kg, 6 kg
You can download the official Mapefloor I 300 SL TRP technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapefloor I 300 SL TRP in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor I 300 SL TRP you need, or describe the job and we will work it out with you.

