
Mapei Self LevellingNo. 43 / 79
Mapefloor I 360 AS Technical Data Sheet (TDS)
Mapei self levelling.
Where static has to be drained away rather than allowed to build, the floor becomes part of the electrical design. Mapefloor I 360 AS is a two component self levelling epoxy resin for electrically conductive systems, mixed 80 parts A to 20 parts B by weight and applied at a maximum of 2.4 kg/m².
- Electrically conductive flooring systems
- Antistatic resin flooring build ups
- Self levelling epoxy body coats
- Industrial resin flooring construction
- Areas where static must be earthed
Build a list across products and send it once, or ask about Mapefloor I 360 AS on WhatsApp now.
- Consumption
- 2.4 kg/m²
- Pack we stock
- 16 kg
- Colour
- RAL 7035
Mapei document 02161
About Mapefloor I 360 AS
Bond strength to EN 13892-8 is quoted at B1.5 and B2.5. It forms the body of an antistatic build up, where the conductive layer beneath has to stay connected through to earth, so the stated consumption is a ceiling and not a guide. Finished in RAL 7035 and applied from +8°C to +35°C. On a UAE fit out, agree the earthing detail with the electrical contractor before the resin goes down, not afterwards.
Documentation
Related documentation
Technical data sheet
1.5 MB · PDF
Mapefloor I 360 AS as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
120kg
- Single layer up to 1.5 mm thick, notched spreader or rake: 2.4 kg/m2
- over 50 m2
Order 6 packs of 20 kg kit (A 16 kg plus B 4 kg)
Taken from the Mapefloor I 360 AS data sheet: CONSUMPTION: max 2.4 kg/m2 of Mapefloor I 360 AS. No site allowance is added unless you turn one on. The sheet says consumption should never exceed 2.4 kg/m2 or the electrical conductivity is compromised, so this is a ceiling and not a range. The layer sits on Primer SN, Copper Band and Primer W-AS N, which are separate products with their own rates.
Application
Where it is used.
- 01Electrically conductive flooring systems
- 02Antistatic resin flooring build ups
- 03Self levelling epoxy body coats
- 04Industrial resin flooring construction
- 05Areas where static must be earthed
Specification
Technical data.
- EN 13813
| Coverage | Max 2.4 kg/m² of Mapefloor I 360 AS. |
|---|---|
| Pack size | 16 kg, 4 kg |
| Pot life | at +10°C: approx. 40 min |
| Set to light foot traffic | at +10°C: approx. 5 days |
| Colours | RAL 7035 |
| Mixing ratio | comp. A : comp. B = 80 : 20 by weight |
| Bond strength | EN 13892-8 ≥ B1.5 ≥ B2.5 |
| Application temperature | from +8°C to +35°C (refers to the ambient, material and |
| Consistency | thick liquid liquid |
| Storage and shelf life | Mapefloor I 360 AS can be stored for 24 months in its original sealed packaging, in a dry place at a temperature between +5°C and +30°C. Protect from frost. |
| Density | 1.77 g/cm³ 1.05 g/cm³ |
Typical values as Mapei prints them in the data sheet for Mapefloor I 360 AS. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
16 kg, 4 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
comp. A : comp. B = 80 : 20 by weight. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
at +10°C: approx. 40 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Mapefloor I 360 AS can be stored for 24 months in its original sealed packaging, in a dry place at a temperature between +5°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor I 360 AS, a self levelling manufactured by Mapei. Allow 2.4 kg/m2, as published by the manufacturer. Mix at comp. A : comp. B = 80 : 20 by weight. Supplied in 16 kg, 4 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor I 360 AS |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Consumption | 2.4 kg/m2 |
| Pack size | 16 kg, 4 kg |
| Mixing ratio | comp. A : comp. B = 80 : 20 by weight |
| Set time | at +10°C: approx. 5 days |
| Pot life | at +10°C: approx. 40 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Max 2.4 kg/m² of Mapefloor I 360 AS.
16 kg, 4 kg
You can download the official Mapefloor I 360 AS technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Mapefloor I 360 AS in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor I 360 AS you need, or describe the job and we will work it out with you.