Mapefloor I 500 W flooring system pack
Mapei's own picture. The pack we stock: 2 kg.

Mapei Flooring SystemNo. 44 / 79

Mapefloor I 500 W Technical Data Sheet (TDS)

Flooring System to HACCP LOGO, LOW ODOUR ICON ISO 16000-28.

A slab that still holds moisture will lift an ordinary epoxy, and that is the problem this resin is built around. Mapefloor I 500 W is a water based epoxy for vapour permeable resin flooring systems, mixed one part A to twelve parts B and used as the base layer of Mapefloor System 51, a slip resistant multi layer floor of about 3 mm.

  • Flooring systems for the food industry
  • Vapour permeable epoxy resin systems
  • Slip resistant multi layer resin floors
  • Slabs with residual moisture
  • Low odour work in occupied buildings
Data sheet1.5 MB

Build a list across products and send it once, or ask about Mapefloor I 500 W on WhatsApp now.

Class
HACCP LOGO, LOW ODOUR ICON ISO 16000-28
Coverage
0.1-2.5 kg/m²
Pack we stock
2 kg
Colour
Neutral

Mapei document 02016

About Mapefloor I 500 W

In that system it follows Mapecoat I 600 W primer at 0.15 to 0.50 kg/m² with a light quartz broadcast, then goes down at 2.5 kg/m². It carries the HACCP mark and a low odour classification to ISO 16000-28 for food industry floors. Pot life is only 20 minutes, which in UAE heat means small batches and a gang standing ready before anything is mixed.

Documentation

Related documentation

  • Technical data sheet

    1.5 MB · PDF

    Mapefloor I 500 W as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

Mapefloor I 500 W is applied as a system of layers, and each layer has its own consumption rate. There is no single figure to multiply an area by, so the schedule is reproduced here as the sheet states it. Ask us and we will price the whole build up.

Primer, Mapecoat I 600 W (A plus B), if requiredanother product
0.15 to 0.50 kg/m2
Light broadcast with Quartz 0.5another product
0.5 kg/m2
Base layer, Mapefloor I 500 W (A plus B plus Mapecolor Paste)
2.5 kg/m2
Broadcast in excess with Quartz 0.5another product
5 kg/m2
Finishing layer, Mapefloor I 500 W (A plus B plus Mapecolor Paste)
0.7 kg/m2

Taken from the Mapefloor I 500 W data sheet: CONSUMPTION, 1. Multi-layer slip-resistant system, thickness approx. 3 mm (Mapefloor System 51): primer Mapecoat I 600 W 0.15 to 0.50 kg/m2, light broadcast with Quartz 0.5 at 0.5 kg/m2, base layer Mapefloor I 500 W at 2.5 kg/m2, broadcast in excess with Quartz 0.5 at 5 kg/m2, finishing layer Mapefloor I 500 W at 0.7 kg/m2..

Application

Where it is used.

  1. 01Flooring systems for the food industry
  2. 02Vapour permeable epoxy resin systems
  3. 03Slip resistant multi layer resin floors
  4. 04Slabs with residual moisture
  5. 05Low odour work in occupied buildings

Specification

Technical data.

  • HACCP LOGO, LOW ODOUR ICON ISO 16000-28
  • EN 13813
Mapefloor I 500 W technical specifications from the manufacturer TDS
ClassificationHACCP LOGO, LOW ODOUR ICON ISO 16000-28
Coverage1. Multi-layer slip-resistant system - thickness approx. 3 mm (Mapefloor System 51) Primer (if required): ▪ Mapecoat I 600 W (A+B): 0.15-0.50 kg/m² ▪ Light broadcast with Quartz 0.5: 0.5 kg/m² Base layer: ▪ Mapefloor I 500 W (A+B + Mapecolor Paste): 2.5 kg/m² ▪ Broadcast in excess with Quartz 0.5: 5
Pack size2 kg, 24 kg
Pot life20 min
ColoursNeutral
Mixing ratiocomponent A : component B = 1 : 12
Bond strengthEN 13892-8 ≥ B1.5 B2.0
Application temperature+10°C to +30°C (refers to the surroundings, material
Consistencyliquid paste
Storage and shelf lifeThe product can be stored for 12 months in its original sealed packaging, in a dry place at a temperature between +10°C and +30°C. Protect from frost.
Density1.14 g/cm³ 2.18 g/cm³

Typical values as Mapei prints them in the data sheet for Mapefloor I 500 W. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

2 kg, 24 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

component A : component B = 1 : 12. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

20 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

The product can be stored for 12 months in its original sealed packaging, in a dry place at a temperature between +10°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapefloor I 500 W, a flooring system manufactured by Mapei, classified HACCP LOGO, LOW ODOUR ICON ISO 16000-28. Mix at component A : component B = 1 : 12. Supplied in 2 kg, 24 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapefloor I 500 W
ProductMapefloor I 500 W
ManufacturerMapei
TypeFlooring System
ClassificationHACCP LOGO, LOW ODOUR ICON ISO 16000-28
Pack size2 kg, 24 kg
Mixing ratiocomponent A : component B = 1 : 12
Pot life20 min
Unit of measurementm2

Frequently Asked Questions

Mapefloor I 500 W is classified HACCP LOGO, LOW ODOUR ICON ISO 16000-28 according to EN 13813, as stated in the manufacturer's technical data sheet.

As per the TDS: 1. Multi-layer slip-resistant system - thickness approx. 3 mm (Mapefloor System 51) Primer (if required): ▪ Mapecoat I 600 W (A+B): 0.15-0.50 kg/m² ▪ Light broadcast with Quartz 0.5: 0.5 kg/m² Base layer: ▪ Mapefloor I 500 W (A+B + Mapecolor Paste): 2.5 kg/m² ▪ Broadcast in excess with Quartz 0.5: 5

2 kg, 24 kg

You can download the official Mapefloor I 500 W technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapefloor I 500 W in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor I 500 W you need, or describe the job and we will work it out with you.

Chat on WhatsApp