
Mapei Self LevellingNo. 45 / 79
Mapefloor PU 406 Technical Data Sheet (TDS)
Mapei self levelling.
Polyurethane is chosen over epoxy when a floor has to move. Mapefloor PU 406 is a two component coloured self levelling elastic polyurethane resin, mixed five parts A to one part B and finished in RAL 7042.
- Self levelling elastic polyurethane floors
- Industrial resin flooring construction
- Decorative cementitious and resin flooring
- Terrazzo style decorative finishes
- Floors subject to thermal movement
Build a list across products and send it once, or ask about Mapefloor PU 406 on WhatsApp now.
- Pack we stock
- 15 kg
- Colour
- RAL 7042
Mapei document 08932
About Mapefloor PU 406
Self levelling gives a seamless plane with no trowel marks, and the elasticity is what lets the floor take thermal movement and minor substrate cracking that would telegraph straight through a rigid epoxy. It is used in industrial and decorative resin flooring, including terrazzo style finishes. Application runs from +8°C to +35°C and the floor sets in 24 hours. Supplied in 15 kg and 3 kg kits with a 12 month shelf life between +10°C and +30°C. In the UAE the top of that storage range is the one to watch, not the bottom.
Documentation
Related documentation
Technical data sheet
0.6 MB · PDF
Mapefloor PU 406 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
Mapefloor PU 406 is applied as a system of layers, and each layer has its own consumption rate. There is no single figure to multiply an area by, so the schedule is reproduced here as the sheet states it. Ask us and we will price the whole build up.
- Mapefloor PU 406 (A + B)
- approximately 1.0 kg/m2
- Quartz 0.25another product
- approximately 0.3 kg/m2
- Quartz 0.5 or Quartz 0.9 or Quartz 1.2, broadcast in excessanother product
- approximately 4.0 kg/m2
Taken from the Mapefloor PU 406 data sheet: CONSUMPTIONS, 1. As protective and wear resistant layer for car parks..
Application
Where it is used.
- 01Self levelling elastic polyurethane floors
- 02Industrial resin flooring construction
- 03Decorative cementitious and resin flooring
- 04Terrazzo style decorative finishes
- 05Floors subject to thermal movement
Specification
Technical data.
- EN 13813
| Pack size | 15 kg, 3 kg |
|---|---|
| Set to light foot traffic | 24 hours |
| Colours | RAL 7042 |
| Mixing ratio | component A : component B = 5:1 |
| Application temperature | from +8°C to +35°C |
| Consistency | thick liquid liquid |
| Storage and shelf life | 12 months in its original sealed packaging, in a dry area, at a temperature between +10°C and +30°C. PROTECT FROM FROST. |
| Density | 1.40 1.20 g/cm³ |
| Tensile strength | 8.5 MPa |
Typical values as Mapei prints them in the data sheet for Mapefloor PU 406. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
15 kg, 3 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 5:1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in its original sealed packaging, in a dry area, at a temperature between +10°C and +30°C. PROTECT FROM FROST. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor PU 406, a self levelling manufactured by Mapei. Mix at component A : component B = 5:1. Supplied in 15 kg, 3 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor PU 406 |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Pack size | 15 kg, 3 kg |
| Mixing ratio | component A : component B = 5:1 |
| Set time | 24 hours |
| Unit of measurement | m2 |
Frequently Asked Questions
15 kg, 3 kg
You can download the official Mapefloor PU 406 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Mapefloor PU 406 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor PU 406 you need, or describe the job and we will work it out with you.