
Mapei Self LevellingNo. 46 / 79
Mapefloor PU 410 Technical Data Sheet (TDS)
Self Levelling to CE EN 13813 SR B1 5 AR0 5 IR4 BFL S1, CE EN 1504-2 PI MC PR IR.
Car park decks have to be waterproof and trafficked at once, and that combination rules out a rigid floor. Mapefloor PU 410 is a two component self levelling polyurethane binder used as the waterproof wear resistant membrane layer of Mapefloor Parking System WD, applied at 1.0 kg/m² with Mapecolor Paste, followed by 0.3 kg/m² of Quartz 0.25 ME and an excess broadcast of 4.0 kg/m² of coarser quartz.
- Waterproof wear resistant car park membranes
- Mapefloor Parking System WD build ups
- Multi storey car park deck coatings
- Industrial resin flooring construction
- Decks requiring crack bridging elasticity
Build a list across products and send it once, or ask about Mapefloor PU 410 on WhatsApp now.
- Class
- CE EN 13813 SR B1 5 AR0 5 IR4 BFL S1, CE EN 1504-2 PI MC PR IR
- Coverage
- 0.3-4 kg/m²
- Pack we stock
- 16 kg
- Colour
- neutral amber
Mapei document 02065 · revision 10-2026
About Mapefloor PU 410
It is CE marked to EN 13813 as SR B1.5 AR0.5 IR4 BFL S1 and to EN 1504-2, with bond strength to EN 13892-8 of at least B1.5. Polyurethane stays elastic, so it bridges deck movement instead of cracking over it. It sets in 24 hours. On a Gulf deck, broadcast while the resin is still open.
Documentation
Related documentation
Technical data sheet
Revision 10-2026 · 1.4 MB · PDF
Mapefloor PU 410 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
Mapefloor PU 410 is applied as a system of layers, and each layer has its own consumption rate. There is no single figure to multiply an area by, so the schedule is reproduced here as the sheet states it. Ask us and we will price the whole build up.
- Mapefloor PU 410 (A + B + Mapecolor Paste)
- 1.0 kg/m2
- Quartz 0.25 MEanother product
- 0.3 kg/m2
- Broadcast in excess with Quartz 0.5 ME or Quartz 0.9 ME or Quartz 1.2 MEanother product
- 4.0 kg/m2
Taken from the Mapefloor PU 410 data sheet: CONSUMPTION: as a waterproof wear resistant membrane layer for Mapefloor Parking System WD..
Application
Where it is used.
- 01Waterproof wear resistant car park membranes
- 02Mapefloor Parking System WD build ups
- 03Multi storey car park deck coatings
- 04Industrial resin flooring construction
- 05Decks requiring crack bridging elasticity
Specification
Technical data.
- CE EN 13813 SR B1 5 AR0 5 IR4 BFL S1, CE EN 1504-2 PI MC PR IR
- EN 13813
| Classification | CE EN 13813 SR B1 5 AR0 5 IR4 BFL S1, CE EN 1504-2 PI MC PR IR |
|---|---|
| Coverage | As a waterproof wear-resistant membrane layer for Mapefloor Parking System WD: Mapefloor PU 410 + (A + B + Mapecolor Paste): 1.0 kg/m² Quartz 0.25 ME: 0.3 kg/m² Broadcast in excess with Quartz 0.5 ME or Quartz 0.9 ME or Quartz 1.2 ME: 4.0 kg/m² Note: the above examples are merely indicative. The act |
| Pack size | 16 kg, 3.9 kg |
| Set to light foot traffic | 24 hours |
| Colours | neutral amber |
| Mixing ratio | by weight: component A : component B = 16 : 3.9 |
| Bond strength | EN 13892-8 ≥ B1.5 ≥ B1.5 |
| Consistency | thick liquid liquid |
| Storage and shelf life | 12 months in its original sealed packaging, in a covered, dry place, at temperature between +10°C and +30°C. Protect from frost. |
| Density | 1.40 g/cm³ 1.22 g/cm³ |
| Tensile strength | 10 N/mm² |
Typical values as Mapei prints them in the data sheet for Mapefloor PU 410. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
16 kg, 3.9 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
by weight: component A : component B = 16 : 3.9. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in its original sealed packaging, in a covered, dry place, at temperature between +10°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor PU 410, a self levelling manufactured by Mapei, classified CE EN 13813 SR B1 5 AR0 5 IR4 BFL S1, CE EN 1504-2 PI MC PR IR. Mix at by weight: component A : component B = 16 : 3.9. Supplied in 16 kg, 3.9 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor PU 410 |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Classification | CE EN 13813 SR B1 5 AR0 5 IR4 BFL S1, CE EN 1504-2 PI MC PR IR |
| Pack size | 16 kg, 3.9 kg |
| Mixing ratio | by weight: component A : component B = 16 : 3.9 |
| Set time | 24 hours |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapefloor PU 410 is classified CE EN 13813 SR B1 5 AR0 5 IR4 BFL S1, CE EN 1504-2 PI MC PR IR according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: As a waterproof wear-resistant membrane layer for Mapefloor Parking System WD: Mapefloor PU 410 + (A + B + Mapecolor Paste): 1.0 kg/m² Quartz 0.25 ME: 0.3 kg/m² Broadcast in excess with Quartz 0.5 ME or Quartz 0.9 ME or Quartz 1.2 ME: 4.0 kg/m² Note: the above examples are merely indicative. The act
16 kg, 3.9 kg
You can download the official Mapefloor PU 410 technical data sheet as a PDF directly from this page, revision 10-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Mapefloor PU 410 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor PU 410 you need, or describe the job and we will work it out with you.