
Mapei Flooring AdhesiveNo. 62 / 79
Ultrabond Eco Fast Track Technical Data Sheet (TDS)
Flooring Adhesive to MARINE MED 0474.
Renovation work is sold on downtime rather than on bond strength. Ultrabond Eco Fast Track is a synthetic resin adhesive in water dispersion with a very fast initial grab, laid at approximately 200 to 400 g/m² through a Mapei 1 or 2 or a TKB A2 to B1 notch.
- Fast renovation of resilient floor coverings
- PVC, CV and LVT floor coverings
- Rubber flooring in sheets and tiles
- Skirtings, profiles, coves and steps
- Textile, needlepunch and flocked floorings
- Linoleum and polyolefin based coverings
Build a list across products and send it once, or ask about Ultrabond Eco Fast Track on WhatsApp now.
- Class
- MARINE MED 0474
- Consumption
- 0.2 to 0.4 kg/m²
- Pack we stock
- 5 kg
- Colour
- beige
Mapei document 05856
About Ultrabond Eco Fast Track
It takes light foot traffic after one hour and lets seams be welded or sealed after about three hours, against the 24 hours a conventional acrylic adhesive needs, and it is ready for full use in 12 hours. Open time is only 15 minutes, so it is spread one bay at a time. Peel strength exceeds 1.5 N/mm on homogeneous PVC and 1.2 N/mm on rubber, and the product is solvent free, APEO free and classified EC1. For a UAE shop or ward that has to reopen the same day, that one hour figure is the whole argument.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Ultrabond Eco Fast Track as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
10.0 to 20.0kg
- MAPEI trowel 1 or 2, TKB A2 or B1: 0.2 to 0.4 kg/m2
- over 50 m2
Order 2 to 4 packs of 5 kg plastic drum
Taken from the Ultrabond Eco Fast Track data sheet: CONSUMPTION: consumption varies with uniformity of substrate, the back of the flooring and type of trowel used (approx. 200 to 400 g/m2, MAPEI trowel 1/2 or TKB A2/B1). The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. The sheet gives one range across all four notches rather than a row per trowel, so the figure spans the fine and the heavy notch.
Application
Where it is used.
- 01Fast renovation of resilient floor coverings
- 02PVC, CV and LVT floor coverings
- 03Rubber flooring in sheets and tiles
- 04Skirtings, profiles, coves and steps
- 05Textile, needlepunch and flocked floorings
- 06Linoleum and polyolefin based coverings
Specification
Technical data.
- MARINE MED 0474
- EMICODE EC1 - very low emissions
| Classification | MARINE MED 0474 |
|---|---|
| Coverage | Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used (approx. 200- 400 g/m² - MAPEI trowel 1/2 or TKB A2/B1). |
| Pack size | 5 kg |
| Open time | 15 minutes |
| Set to light foot traffic | after 1 hour |
| Colours | beige |
| Application temperature | from +5°C to +35°C |
| Consistency | creamy paste |
| Storage and shelf life | Under normal conditions, Ultrabond Fast Track is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. |
| EMICODE | EC1 - very low emissions |
| Density | 1.00 g/cm³ |
| Ph | 8.0 |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco Fast Track. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Under normal conditions, Ultrabond Fast Track is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco Fast Track, a flooring adhesive manufactured by Mapei, classified MARINE MED 0474. Allow 0.2 to 0.4 kg/m2, as published by the manufacturer. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco Fast Track |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Classification | MARINE MED 0474 |
| Consumption | 0.2 to 0.4 kg/m2 |
| Pack size | 5 kg |
| Set time | after 1 hour |
| Open time | 15 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultrabond Eco Fast Track is classified MARINE MED 0474 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used (approx. 200- 400 g/m² - MAPEI trowel 1/2 or TKB A2/B1).
5 kg
You can download the official Ultrabond Eco Fast Track technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco Fast Track in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco Fast Track you need, or describe the job and we will work it out with you.

