
Mapei Surface TreatmentNo. 44 / 54
Ultracare Penetrating Plus Stone, Tile and Grout Sealer Technical Data Sheet (TDS)
Mapei surface treatment.
UltraCare Penetrating Plus Stone, Tile and Grout Sealer is a water based penetrating sealer for interior and exterior natural stone, unglazed ceramic tile, masonry, cement pavers, concrete, brick and cement grout. It soaks in instead of filming over, so unlike an intensifier it does not alter the appearance of the surface, and Mapei lists it as salt and alkali resistant.
- Sealing interior and exterior natural stone: marble, granite, limestone, sandstone, slate, Saltillo and travertine
- Sealing some unglazed porcelain tile, masonry surfaces, cement pavers, quarry tiles, concrete and bricks
- Sealing cement grout, once a new grout installation has cured for at least 48 hours
- Use as a pre grouting sealer before the grout goes in
- Resealing a surface that has started to absorb water in the drop test
Build a list across products and send it once, or ask about Ultracare Penetrating Plus Stone, Tile and Grout Sealer on WhatsApp now.
- Consumption
- 0.0291 to 0.2038 L/m²
- Pack we stock
- 3.79 l
About Ultracare Penetrating Plus Stone, Tile and Grout Sealer
The coverage decides the order, not the area: one 3.79 litre jug does 130 m2 on a tight surface and only 18.6 m2 on an absorbent one, so density, porosity and texture are what a quantity has to be taken from. Protection against most common stains is stated for up to 15 years. Apply between 10 and 26 degrees C on a dry surface, let new grout cure 48 hours first, and buff off every trace that has not been absorbed.
Documentation
Related documentation
Technical data sheet
Revision 05-2026 · 1.0 MB · PDF
Ultracare Penetrating Plus Stone, Tile and Grout Sealer as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Revision 9-2025 · 0.2 MB · PDF
For the method statement and the site file.
DownloadSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
1.46 to 10.2litres
- Stone, tile, masonry or grout, as printed: 0.02915 to 0.20376 litre/m2
- over 50 m2
Order 1 to 3 packs of 3.79 litre jug, 1 U.S. gal.
Taken from the Ultracare Penetrating Plus Stone, Tile and Grout Sealer data sheet: Approximate Coverage: 1 U.S. pint (473 mL) 25 to 175 sq. ft. (2.32 to 16.3 m2); 1 U.S. qt. (946 mL) 50 to 350 sq. ft. (4.65 to 32.5 m2); 1 U.S. gal. (3.79 L) 200 to 1,400 sq. ft. (18.6 to 130 m2). The sheet quotes an area per pack, not a rate, and all three rows give the same rate, so the gallon row is inverted here into litres per square metre. No site allowance is added unless you turn one on. The sheet publishes one rate for every surface and spans porosity inside the range rather than splitting it into rows, so the wide band is the manufacturer's own. It says coverage varies with density, porosity, texture, surface absorption, weather conditions, application method and number of coats, which means the printed range already allows for the second coat that very porous surfaces need one hour after the first. There is no separate coats control for that reason.
Application
Where it is used.
- 01Sealing interior and exterior natural stone: marble, granite, limestone, sandstone, slate, Saltillo and travertine
- 02Sealing some unglazed porcelain tile, masonry surfaces, cement pavers, quarry tiles, concrete and bricks
- 03Sealing cement grout, once a new grout installation has cured for at least 48 hours
- 04Use as a pre grouting sealer before the grout goes in
- 05Resealing a surface that has started to absorb water in the drop test
Specification
Technical data.
| Coverage | 473 mL: 25 to 175 sq. ft. (2.32 to 16.3 m2). 946 mL: 50 to 350 sq. ft. (4.65 to 32.5 m2). 3.79 L: 200 to 1,400 sq. ft. (18.6 to 130 m2) |
|---|---|
| Pack size | Bottle 473 mL (1 U.S. pint), bottle 946 mL (1 U.S. qt.), jug 3.79 L (1 U.S. gal.) |
| Application temperature | 50°F to 80°F (10°C to 26°C), surface and sealer |
| Storage and shelf life | Up to 2 years when stored in the original sealed container |
| Physical state | Liquid |
| Colour | Milky white |
| Odour | Odorless |
| Voc content | less than 100 g per L to SCAQMD Rule 1113, typical content 7 g per L by SCAQMD Rule 1113 testing methods |
| Time before allowing traffic | 3 hours at 73°F (23°C) and 50% relative humidity |
| Waiting time between applications | 1 hour |
| Duration of protection | expected to protect against most common stains for up to 15 years |
| Industry standards | Meets all EPA and SCAQMD standards for VOCs |
| Storage temperature | 40°F to 90°F (4°C to 32°C), do not allow to freeze |
Typical values as Mapei prints them in the data sheet for Ultracare Penetrating Plus Stone, Tile and Grout Sealer. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
Bottle 473 mL (1 U.S. pint), bottle 946 mL (1 U.S. qt.), jug 3.79 L (1 U.S. gal.). Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Up to 2 years when stored in the original sealed container in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultracare Penetrating Plus Stone, Tile and Grout Sealer, a surface treatment manufactured by Mapei. Allow 0.0291 to 0.2038 L/m2, as published by the manufacturer. Supplied in bottle 473 ml (1 u.s. pint), bottle 946 ml (1 u.s. qt.), jug 3.79 l (1 u.s. gal.). Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultracare Penetrating Plus Stone, Tile and Grout Sealer |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.0291 to 0.2038 L/m2 |
| Pack size | Bottle 473 mL (1 U.S. pint), bottle 946 mL (1 U.S. qt.), jug 3.79 L (1 U.S. gal.) |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 473 mL: 25 to 175 sq. ft. (2.32 to 16.3 m2). 946 mL: 50 to 350 sq. ft. (4.65 to 32.5 m2). 3.79 L: 200 to 1,400 sq. ft. (18.6 to 130 m2)
Bottle 473 mL (1 U.S. pint), bottle 946 mL (1 U.S. qt.), jug 3.79 L (1 U.S. gal.)
You can download the official Ultracare Penetrating Plus Stone, Tile and Grout Sealer technical data sheet as a PDF directly from this page, revision 05-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Ultracare Penetrating Plus Stone, Tile and Grout Sealer in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare Penetrating Plus Stone, Tile and Grout Sealer you need, or describe the job and we will work it out with you.

