
Mapei Tile AdhesiveNo. 45 / 54
Ultracare Rust Remover Technical Data Sheet (TDS)
Mapei tile adhesive.
Rust is the only stain this bottle is for. UltraCare Rust Remover is a fast acting, acid free cleaner in aqueous solution with a slightly alkaline pH of 7.5, and that is precisely why it can be used on acid sensitive materials such as limestone, polished limestone included, where an acidic descaler would etch the surface beyond saving.
- Removing surface and deep rust stains
- Rust removal from acid sensitive materials
- Rust stains on limestone, including polished limestone
- Repeat treatment of deep or stubborn rust staining
- Spot treatment on absorbent and non absorbent surfaces
Build a list across products and send it once, or ask about Ultracare Rust Remover on WhatsApp now.
- Consumption
- 250 ml/m²
- Pack we stock
- 0.125 l
- Colour
- colourless
Mapei document 11022
About Ultracare Rust Remover
Polished limestone and marble are the floor in half the lobbies in the UAE, so the distinction matters. Dampen the surface, lay on a coat 1 to 3 mm thick and watch it turn purple as it reacts with the iron. Rinse as soon as that colour shows, and inside five minutes on anything non absorbent, because left too long it leaves a purple halation that then needs peroxide and bicarbonate to shift. One 125 ml bottle covers about half a square metre.
Documentation
Related documentation
Technical data sheet
0.6 MB · PDF
Ultracare Rust Remover as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
12,500ml
- Rust staining on the surface: 250 ml/m2
- over 50 m2
Order 100 packs of 125 ml bottle
Taken from the Ultracare Rust Remover data sheet: CONSUMPTION: one 125 ml bottle of UltraCare Rust Remover can clean approximately 0.5 m2 of surface, which is 250 ml per m2, so a bottle does half a square metre. No site allowance is added unless you turn one on. The same section says consumption is heavily influenced by the amount and type of dirt and the kind of surface to be treated, so this is a starting figure for a quotation and not a guaranteed one. Sold in boxes of 10 bottles.
Application
Where it is used.
- 01Removing surface and deep rust stains
- 02Rust removal from acid sensitive materials
- 03Rust stains on limestone, including polished limestone
- 04Repeat treatment of deep or stubborn rust staining
- 05Spot treatment on absorbent and non absorbent surfaces
Specification
Technical data.
- EN 12004 and ISO 13007
| Coverage | One 125 ml bottle of UltraCare Rust Remover can clean approximately 0.5 m of surface. Consumption is heavily influenced by the amount and type of dirt and kind of surface to be treated. |
|---|---|
| Pack size | 0.125 l |
| Colours | colourless |
| Storage and shelf life | UltraCare Rust Remover may be stored for 36 months in its original packaging. |
| Ph | 7.5 |
| Density | 1.050 kg/l |
Typical values as Mapei prints them in the data sheet for Ultracare Rust Remover. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
0.125 l. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
UltraCare Rust Remover may be stored for 36 months in its original packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultracare Rust Remover, a tile adhesive manufactured by Mapei. Allow 250 ml/m2, as published by the manufacturer. Supplied in 0.125 l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultracare Rust Remover |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Consumption | 250 ml/m2 |
| Pack size | 0.125 l |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: One 125 ml bottle of UltraCare Rust Remover can clean approximately 0.5 m of surface. Consumption is heavily influenced by the amount and type of dirt and kind of surface to be treated.
0.125 l
You can download the official Ultracare Rust Remover technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Ultracare Rust Remover in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultracare Rust Remover you need, or describe the job and we will work it out with you.