
Mapei AccessoryNo. 12 / 47
Mapeband TPE Technical Data Sheet (TDS)
Mapei accessory.
Two widths, two movement ratings, and choosing between them is most of the specification. Mapeband TPE is a thermoplastic polyolefin tape 1.2 mm thick with non woven polyester edging, supplied in 30 m rolls as either Mapeband TPE 170 at 17 cm wide, whose 50 mm expansion zone takes 5 mm of movement, or Mapeband TPE 325 at 32.5 cm wide, whose 165 mm zone takes 10 mm.
- Flexible waterproofing seals of expansion joints subject to large movement
- Flexible waterproofing seals in tunnels and road works
- Sealing expansion joints in prefabricated panels
- Sealing structural joints in facades
- Sealing joints in hydraulic works, channels, basins and drains
- Waterproofing expansion joints in flat covering layers
Build a list across products and send it once, or ask about Mapeband TPE on WhatsApp now.
- Supplied
- 30 m roll, 0.17 m wide, lapped 5 cm
- Pack we stock
- 30 m
- Colour
- grey
Mapei document 02033
About Mapeband TPE
It is bonded with Adesilex PG4 epoxy, 1 to 2 mm laid first, the tape pressed in, then a second layer over the fabric and a scatter of 0.5 Quartz. Elongation at break above 500 per cent and watertightness to 6 bar are what let it cross a joint that keeps working. Measure a UAE podium deck joint through a summer afternoon before deciding which grade is wide enough.
Documentation
Related documentation
Technical data sheet
2.5 MB · PDF
Mapeband TPE as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Rolls are 30 m long, lapped 5 cm at each end.
As published in the data sheet
20.0m
- 20 m of detail
- plus 5 cm of lap at each roll end
Order 1 pack of 30 m roll, 17 cm wide
Taken from the Mapeband TPE data sheet: PACKAGING: Mapeband TPE 170 (width 17 cm), 30 m x 17 cm rolls; Mapeband TPE 325 (width 32.5 cm), 30 m x 32.5 cm rolls. APPLICATION: butt joints between two strips of Mapeband TPE must be carried out by overlapping and bonding at least 5 cm of the central part in TPE by either hot welding or cold welding. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Mapeband TPE is a thermoplastic elastomer tape bonded over a joint with Adesilex PG1, PG2 or PG4, so it is measured by the metre of joint. The figure is for Mapeband TPE 170, the 17 cm wide tape; Mapeband TPE 325 comes on a 30 m roll 32.5 cm wide and is ordered the same way. Only the 5 cm lap at the end of each roll is counted here. Where high levels of movement are foreseen the sheet says to lay the tape in an omega shape inside the joint, which takes more tape per metre than this sum allows and the sheet does not quantify. The epoxy adhesive it is bedded into is a separate product with its own rate.
Application
Where it is used.
- 01Flexible waterproofing seals of expansion joints subject to large movement
- 02Flexible waterproofing seals in tunnels and road works
- 03Sealing expansion joints in prefabricated panels
- 04Sealing structural joints in facades
- 05Sealing joints in hydraulic works, channels, basins and drains
- 06Waterproofing expansion joints in flat covering layers
Specification
Technical data.
| Pack size | 30 m |
|---|---|
| Colours | grey |
| Elongation | > 500 % |
| Tensile strength | > 4.5 N/mm² |
| Thickness | 1.2 mm |
Typical values as Mapei prints them in the data sheet for Mapeband TPE. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
30 m. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
For quantity surveyors
BOQ clause.
Supply and apply Mapeband TPE, a accessory manufactured by Mapei. Allow 30 m roll, 0.17 m wide, lapped 5 cm, as published by the manufacturer. Applied thickness 1.2 mm. Supplied in 30 m. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeband TPE |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Supplied | 30 m roll, 0.17 m wide, lapped 5 cm |
| Thickness | 1.2 mm |
| Pack size | 30 m |
| Unit of measurement | m2 |
Frequently Asked Questions
30 m
You can download the official Mapeband TPE technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapeband TPE in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeband TPE you need, or describe the job and we will work it out with you.