
Mapei AccessoryNo. 14 / 47
Mapeguard Board Technical Data Sheet (TDS)
Mapei accessory.
Mapeguard Board replaces a rendered wall rather than coating one. It is a high density extruded polystyrene core faced both sides with a waterproof multi layer membrane, cut with a knife and bonded with a C2 cementitious adhesive, so a plumb, tileable and already waterproof surface is built in one operation.
- Levelling out of plumb and unrendered walls
- Levelling deteriorated render or old tiling
- Room partitions and shower cabin walls
- Bathtub surrounds and sanitary ware supports
- Benches and seats in bathrooms and wellness centres
- Waterproofing surfaces before installing tiling
Build a list across products and send it once, or ask about Mapeguard Board on WhatsApp now.
- Pack we stock
- 600 x 1300 x 7 mm, 600 x 2600 x 10 mm, 600 x 2600 x 20 mm, 600 x 2600 x 48 mm
Mapei document 09268
About Mapeguard Board
Panels come 60 by 130 cm in 7 and 10 mm and 60 by 260 cm in 10, 20, 30 and 48 mm, at a density of 33 kg/m³, with compressive strength of 300 kPa at 10 per cent deformation and bond strength of 0.3 N/mm² to EN 1348. The board is waterproof but the assembly is not until the joints are taped with Mapeguard ST and the corners, edges and pipes closed with Mapeguard IC, EC, PC and DH-U. Store it flat indoors on a UAE site: more than 30 days of direct sun is too much.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Mapeguard Board as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
An insulation and tiling board, ordered by the panel rather than by area or metre, and the sheet publishes no consumption rate. The printed panel sizes are 60 by 130 cm in 7 and 10 mm and 60 by 260 cm in 10, 20, 30 and 48 mm, packed 16, 16, 8, 8, 6 and 2 panels to a pack. Take the area, divide by the panel area and count packs. The adhesive that fixes it is a separate product with its own rate.
There is no area calculator for Mapeguard Board because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Levelling out of plumb and unrendered walls
- 02Levelling deteriorated render or old tiling
- 03Room partitions and shower cabin walls
- 04Bathtub surrounds and sanitary ware supports
- 05Benches and seats in bathrooms and wellness centres
- 06Waterproofing surfaces before installing tiling
Specification
Technical data.
| Pack size | 600 x 1300 x 7 mm, 600 x 2600 x 10 mm, 600 x 2600 x 20 mm, 600 x 2600 x 48 mm |
|---|---|
| Storage and shelf life | Regardless of the thickness, Mapeguard Board panels must be stored indoors, in horizontal position, and protected from direct sunlight and moisture. |
| Density | 33 33 33 kg/m |
Typical values as Mapei prints them in the data sheet for Mapeguard Board. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
600 x 1300 x 7 mm, 600 x 2600 x 10 mm, 600 x 2600 x 20 mm, 600 x 2600 x 48 mm. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Regardless of the thickness, Mapeguard Board panels must be stored indoors, in horizontal position, and protected from direct sunlight and moisture. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeguard Board, a accessory manufactured by Mapei. Supplied in 600 x 1300 x 7 mm, 600 x 2600 x 10 mm, 600 x 2600 x 20 mm, 600 x 2600 x 48 mm. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeguard Board |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Pack size | 600 x 1300 x 7 mm, 600 x 2600 x 10 mm, 600 x 2600 x 20 mm, 600 x 2600 x 48 mm |
| Unit of measurement | m2 |
Frequently Asked Questions
600 x 1300 x 7 mm, 600 x 2600 x 10 mm, 600 x 2600 x 20 mm, 600 x 2600 x 48 mm
You can download the official Mapeguard Board technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapeguard Board in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeguard Board you need, or describe the job and we will work it out with you.