
Mapei AccessoryNo. 15 / 47
Mapeguard UM 35 Technical Data Sheet (TDS)
Mapei accessory.
Tiles crack because the slab beneath them cracked first. Mapeguard UM 35 breaks that path: a blue honeycomb HDPE membrane with a polypropylene fabric backing, supplied in 30 m by 1 m rolls, bedded in a C2 adhesive so the covering above is mechanically keyed to it and uncoupled from the substrate below.
- Laying ceramic and stone on cracked substrates
- Substrates that are not fully cured
- Balconies and terraces
- Bathrooms and wet rooms
- Overlaying old ceramic, resin and wood flooring
- Heated cementitious and anhydrite screeds
Build a list across products and send it once, or ask about Mapeguard UM 35 on WhatsApp now.
- Supplied
- 30 m roll, 1 m wide, lapped 0 cm
- Pack we stock
- 1 m, 30 x 1 m, 30 sqm
- Colour
- blue
Mapei document 07680
About Mapeguard UM 35
Air channels on the underside let a damp or young screed carry on drying, which is why it is accepted on substrates not yet fully cured. Pull out strength with a C2 adhesive is 0.6 N/mm², and the Robinson wheel test to ASTM C 627 returns an extra heavy commercial rating. It will not bridge cracks wider than 3 mm or structural joints. Joints between sheets and the perimeter are sealed with Mapeband Easy and Mapeguard WP Adhesive. Useful where a UAE fit out programme tiles a screed earlier than it should.
Documentation
Related documentation
Technical data sheet
2.2 MB · PDF
Mapeguard UM 35 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Rolls are 30 m long and 1 m wide, lapped 0 cm at every junction.
As published in the data sheet
50.0m
- 1 m wide roll lapped 0 cm covers 1 m of width
- over 50 m2
Order 2 packs of 30 m roll, 1 m wide
Taken from the Mapeguard UM 35 data sheet: PACKAGING: 30 m x 1 m rolls. APPLICATION PROCEDURE: waterproofing of joints between the sheets with Mapeband Easy, bonded with Mapeguard WP Adhesive. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Mapeguard UM 35 is an uncoupling and crack bridging membrane bedded in tile adhesive. It prints the roll but no lap, because adjacent sheets are laid up to one another and the joint between them is sealed with Mapeband Easy rather than overlapped, so a 30 m roll covers 30 m2. Nothing is added here for a lap between successive pieces, because the sheet prints none: that is a bound the sheet does not print, so allow for it on site. Cutting around drains, walls and elements passing through the floor is a site allowance the sheet does not quantify. The adhesive above and below the membrane, and the Mapeband Easy and Mapeguard WP Adhesive that seal the joints, are separate products with their own rates.
Application
Where it is used.
- 01Laying ceramic and stone on cracked substrates
- 02Substrates that are not fully cured
- 03Balconies and terraces
- 04Bathrooms and wet rooms
- 05Overlaying old ceramic, resin and wood flooring
- 06Heated cementitious and anhydrite screeds
Specification
Technical data.
| Pack size | 1 m, 30 x 1 m, 30 sqm |
|---|---|
| Colours | blue |
Typical values as Mapei prints them in the data sheet for Mapeguard UM 35. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1 m, 30 x 1 m, 30 sqm. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
For quantity surveyors
BOQ clause.
Supply and apply Mapeguard UM 35, a accessory manufactured by Mapei. Allow 30 m roll, 1 m wide, lapped 0 cm, as published by the manufacturer. Supplied in 1 m, 30 x 1 m, 30 sqm. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeguard UM 35 |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Supplied | 30 m roll, 1 m wide, lapped 0 cm |
| Pack size | 1 m, 30 x 1 m, 30 sqm |
| Unit of measurement | m2 |
Frequently Asked Questions
1 m, 30 x 1 m, 30 sqm
You can download the official Mapeguard UM 35 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapeguard UM 35 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeguard UM 35 you need, or describe the job and we will work it out with you.