
Mapei WaterproofingNo. 30 / 47
Mapeproof Liquid Membrane Technical Data Sheet (TDS)
Mapei waterproofing.
Sheet membranes are strong on long flat runs and weak at penetrations, and Mapeproof Liquid Membrane is the two component polyurethane elastomer that finishes those details. It is thixotropic, so it stays where it is put on a vertical face, and it seals, fills and details Mapeproof AL and Mapethene HT and LT membranes at pipes, corners and terminations.
- Sealing and detailing Mapeproof AL membranes
- Detailing Mapethene HT and LT membranes
- Filling and sealing around pipe penetrations
- Corners, upstands and terminations below grade
- Pre applied and post applied below grade waterproofing
Build a list across products and send it once, or ask about Mapeproof Liquid Membrane on WhatsApp now.
- Consumption
- 1.2 kg/m² per mm
- Pack we stock
- 3.5 kg
- Colour
- light blue amber yellow
Mapei document 07513
About Mapeproof Liquid Membrane
Elongation at failure is 440 per cent to ISO 37 and bond strength to concrete is 2 N per square millimetre to EN 1542, which is why it can be trusted at the junction between two systems. Mix at 100 parts A to 25 parts B, allow about 1.2 kg per square metre per millimetre on smooth concrete and build at least 2.5 mm on system details. Finish every detail before protection boards go up: none of it is reachable once concrete arrives.
Documentation
Related documentation
Technical data sheet
4.1 MB · PDF
Mapeproof Liquid Membrane as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2.5 to 5 mm.
As published in the data sheet
150kg
- 1.2 kg/m2 per mm
- 2.5 mm thick
- over 50 m2
Order 43 packs of 3.5 kg A plus B unit
Taken from the Mapeproof Liquid Membrane data sheet: CONSUMPTION: 1.2 kg/m2/mm (average consumption on smooth concrete surfaces). Minimum thickness: 2.5 mm. No site allowance is added unless you turn one on. Poured from the drum and spread with a metallic trowel in one application, so there is no coats control: the thickness is the whole of the sum. Only the minimum of 2.5 mm is printed, for the Mapeproof AL, Mapethene HT/LT, Mapeproof SA and Mapeproof AL 1200 AP system details; the 5 mm upper bound here is a working limit and not a sheet figure. The rate is an average on smooth concrete.
Application
Where it is used.
- 01Sealing and detailing Mapeproof AL membranes
- 02Detailing Mapethene HT and LT membranes
- 03Filling and sealing around pipe penetrations
- 04Corners, upstands and terminations below grade
- 05Pre applied and post applied below grade waterproofing
Specification
Technical data.
- EN 14891
| Coverage | 1.2 kg/m²/mm (average consumption on smooth concrete surfaces). For Mapeproof AL, Mapethene HT/LT, Mapeproof SA and Mapeproof AL 1200 AP system details: Minimum thickness: 2.5 mm. |
|---|---|
| Pack size | 3.5 kg |
| Colours | light blue amber yellow |
| Mixing ratio | comp. A : comp. B = 100 : 25 |
| Bond strength | to concrete (EN 1542): 2 N/mm² |
| Application temperature | from +5°C to +35°C |
| Consistency | thixotropic paste liquid |
| Storage and shelf life | Mapeproof Liquid Membrane may be stored for 12 months in a cool, dry place. Component B must be kept at more than +5°C. At lower temperatures it tends to crystallise. |
| Density | 1.2 g/cm 1.1 g/cm |
| Tensile strength | 3.5 N/mm² |
| Elongation | at failure (ISO 37): 440% |
Typical values as Mapei prints them in the data sheet for Mapeproof Liquid Membrane. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
3.5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
comp. A : comp. B = 100 : 25. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
Mapeproof Liquid Membrane may be stored for 12 months in a cool, dry place. Component B must be kept at more than +5°C. At lower temperatures it tends to crystallise. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeproof Liquid Membrane, a waterproofing manufactured by Mapei. Allow 1.2 kg/m2 per mm, as published by the manufacturer. Mix at comp. A : comp. B = 100 : 25. Supplied in 3.5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeproof Liquid Membrane |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Consumption | 1.2 kg/m2 per mm |
| Pack size | 3.5 kg |
| Mixing ratio | comp. A : comp. B = 100 : 25 |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1.2 kg/m²/mm (average consumption on smooth concrete surfaces). For Mapeproof AL, Mapethene HT/LT, Mapeproof SA and Mapeproof AL 1200 AP system details: Minimum thickness: 2.5 mm.
3.5 kg
You can download the official Mapeproof Liquid Membrane technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Mapeproof Liquid Membrane in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeproof Liquid Membrane you need, or describe the job and we will work it out with you.