
Mapei WaterproofingNo. 31 / 47
Mapeproof Mastic Technical Data Sheet (TDS)
Mapei waterproofing.
Bentonite seals by swelling, and Mapeproof Mastic is that behaviour in a form you can trowel into a gap. Half natural sodium bentonite and half non toxic plasticising agents, at a density of 1.5 kg/dm³, it is worked dry onto horizontal and vertical faces around everything the Mapeproof bentonite sheet cannot be cut neatly around: reinforcement rods in pile heads, piping, drainage wells and connector rods, which are grouted through the holes made for them.
- Sealing elements passing through Mapeproof bentonite sheets
- Reinforcement rods in pile heads
- Piping and drainage wells
- Grouting connector and reinforcement rods
- Localised repairs to damaged Mapeproof sheets
- Continuity between Mapeproof sheets and Mapelastic Foundation
Build a list across products and send it once, or ask about Mapeproof Mastic on WhatsApp now.
- Consumption
- 1.5 kg/m² per mm
- Pack we stock
- 15 kg
Mapei document 02923
About Mapeproof Mastic
It also repairs damaged sheet locally and grouts the 10 cm overlap where a Mapeproof sheet under the raft meets Mapelastic Foundation or a Plastimul product on the wall above. Allow 1.5 kg/m² per millimetre of thickness from the 15 kg bucket. Mapei rules out application below +5°C or in wet weather, and the paste skins if left open, so close UAE pile head details in one visit.
Documentation
Related documentation
Technical data sheet
1.6 MB · PDF
Mapeproof Mastic as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 5 mm.
As published in the data sheet
75.0kg
- 1.5 kg/m2 per mm
- 1 mm thick
- over 50 m2
Order 5 packs of 15 kg 10 litre bucket containing 15 kg
Taken from the Mapeproof Mastic data sheet: CONSUMPTION: 1.5 kg/m2 of fresh product per mm of thickness. No site allowance is added unless you turn one on. A detailing mastic, trowelled around through elements, pile heads, connector rods and the overlaps between Mapeproof bentonite sheets, so the area it covers is small and local. The sheet prints no required thickness and no coat count, so the 1 mm default is a unit basis that reads straight off the printed figure and the 5 mm upper bound is a working limit, not a sheet figure.
Application
Where it is used.
- 01Sealing elements passing through Mapeproof bentonite sheets
- 02Reinforcement rods in pile heads
- 03Piping and drainage wells
- 04Grouting connector and reinforcement rods
- 05Localised repairs to damaged Mapeproof sheets
- 06Continuity between Mapeproof sheets and Mapelastic Foundation
Specification
Technical data.
- EN 14891
| Coverage | 1.5 kg/m² of fresh product per mm of thickness. |
|---|---|
| Pack size | 15 kg |
| Storage and shelf life | 12 months in its original unopened packaging; protect from frost. |
| Density | 1.5 kg/dm³ |
| Water behaviour | bentonite hydrates freely and swells |
Typical values as Mapei prints them in the data sheet for Mapeproof Mastic. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
15 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in its original unopened packaging; protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeproof Mastic, a waterproofing manufactured by Mapei. Allow 1.5 kg/m2 per mm, as published by the manufacturer. Supplied in 15 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeproof Mastic |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Consumption | 1.5 kg/m2 per mm |
| Pack size | 15 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1.5 kg/m² of fresh product per mm of thickness.
15 kg
You can download the official Mapeproof Mastic technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Mapeproof Mastic in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeproof Mastic you need, or describe the job and we will work it out with you.