
Mapei WaterproofingNo. 32 / 47
Mapeproof Primer Technical Data Sheet (TDS)
Mapei waterproofing.
Mapeproof Primer does a job that sits slightly apart from the rest of this line. It is a one component, ready to use PVDC based dispersion membrane, green in colour, applied over a screed to suppress residual construction moisture up to 4.5 CM-%, equivalent to 95% relative humidity, so floor coverings can be laid before the slab has fully dried.
- Suppressing residual moisture in screeds
- Preparation of floor substrates before covering
- Moisture barrier beneath floor coverings
- Early installation of finishes over young screeds
- Rapid drying waterproof film under flooring adhesives
Build a list across products and send it once, or ask about Mapeproof Primer on WhatsApp now.
- Consumption
- 0.12 to 0.26 kg/m² over 2 coats
- Pack we stock
- 10 kg
- Colour
- green
Mapei document 02957
About Mapeproof Primer
Without it, moisture rising through a young screed lifts vinyl and debonds timber weeks after handover. It dries rapidly to a waterproof surface film and is then overlaid with the flooring adhesive. Consumption is around 60 to 70 g per square metre diluted one to one, 120 to 130 g undiluted, or about 250 g applied in two coats. Programme pressure on UAE fit outs is exactly why this exists, but confirm the screed moisture reading before relying on it.
Documentation
Related documentation
Technical data sheet
1.1 MB · PDF
Mapeproof Primer as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
Coats
The sheet calls for 2 to 3.
As published in the data sheet
12.0 to 13.0kg
- Undiluted: 0.12 to 0.13 kg/m2
- 2 coats
- over 50 m2
Order 2 packs of 10 kg can
Taken from the Mapeproof Primer data sheet: CONSUMPTION: Approx. 60-70 g/m2 with dilution 1:1. Approx. 120-130 g/m2 undiluted, according to the absorbency of the substrate (approx. 250 g/m2 as a two coats application). No site allowance is added unless you turn one on. Both printed dilutions are here and the undiluted one is the default, because the sheet's own instruction is two coats of undiluted primer at a consumption rate of approx. 250 g/m2, which is what two coats of 120 to 130 g/m2 comes to. The diluted figure of 60 to 70 g/m2 is a single pre treatment coat for compact or low absorbency screeds and is roughly a quarter of the primer the job needs, so it should not be used as the headline rate. A further coat is printed if the primer is not covered within 18 hours.
Application
Where it is used.
- 01Suppressing residual moisture in screeds
- 02Preparation of floor substrates before covering
- 03Moisture barrier beneath floor coverings
- 04Early installation of finishes over young screeds
- 05Rapid drying waterproof film under flooring adhesives
Specification
Technical data.
- EN 14891
| Coverage | Approx. 60-70 g/m² with dilution 1:1. Approx. 120-130 g/m² undiluted, according to the absorbency of the substrate (approx. 250 g/m² as a two coats application). |
|---|---|
| Pack size | 10 kg |
| Colours | green |
| Application temperature | from +5°C to +35°C |
| Consistency | fluid liquid |
| Storage and shelf life | Under normal conditions, Mapeproof Primer is stable for at least 12 months in its original sealed packaging. Protect from frost. |
| Recoat time | before applying the adhesive or the |
| Density | 1.05 g/cm³ |
| Dry solids | 47% |
Typical values as Mapei prints them in the data sheet for Mapeproof Primer. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Under normal conditions, Mapeproof Primer is stable for at least 12 months in its original sealed packaging. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeproof Primer, a waterproofing manufactured by Mapei. Allow 0.12 to 0.26 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeproof Primer |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Consumption | 0.12 to 0.26 kg/m2 over 2 coats |
| Pack size | 10 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Approx. 60-70 g/m² with dilution 1:1. Approx. 120-130 g/m² undiluted, according to the absorbency of the substrate (approx. 250 g/m² as a two coats application).
10 kg
You can download the official Mapeproof Primer technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Mapeproof Primer in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeproof Primer you need, or describe the job and we will work it out with you.