
Mapei PrimerNo. 33 / 47
Mapeproof SA Primer Technical Data Sheet (TDS)
Mapei primer.
A self adhesive membrane sticks to whatever the concrete surface offers it, which on a site finished slab is usually dust. Mapeproof SA Primer settles that: a one component, rapid drying primer, a golden yellow thick liquid applied to the substrate before any self adhesive sheet from the Mapeproof or Mapethene ranges goes down, binding loose fines and giving the membrane a consistent surface to grip.
- Priming concrete before self adhesive membranes
- Preparation for Mapeproof range membranes
- Preparation for Mapethene range membranes
- Post applied below grade waterproofing
- Binding dusty or absorbent concrete surfaces
Build a list across products and send it once, or ask about Mapeproof SA Primer on WhatsApp now.
- Consumption
- 0.2 kg/m²
- Pack we stock
- 10 kg
- Colour
- golden yellow
Mapei document 07691
About Mapeproof SA Primer
Consumption is around 200 g per square metre depending on how absorbent the concrete is, and it comes in 10 kg packs with a twelve month shelf life stored between +15°C and +25°C. Its place is post applied below grade waterproofing, under basement walls and slabs. On a dusty UAE site, prime only the area that can be sheeted the same day, because fresh primer collects the dust it was meant to beat.
Documentation
Related documentation
Technical data sheet
1.1 MB · PDF
Mapeproof SA Primer as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
10.0kg
- As supplied, ready to use: 0.2 kg/m2
- over 50 m2
Order 1 pack of 10 kg drum
Taken from the Mapeproof SA Primer data sheet: CONSUMPTION: ca 200 g/m2, depending on the absorption rate of the substrate. No site allowance is added unless you turn one on. Supplied ready to use. Mix the contents of the container before use and do not dilute with solvent.
Application
Where it is used.
- 01Priming concrete before self adhesive membranes
- 02Preparation for Mapeproof range membranes
- 03Preparation for Mapethene range membranes
- 04Post applied below grade waterproofing
- 05Binding dusty or absorbent concrete surfaces
Specification
Technical data.
| Coverage | Ca 200 g/m², depending on the absorption rate of the substrate. |
|---|---|
| Pack size | 10 kg |
| Colours | golden yellow |
| Consistency | thick liquid |
| Storage and shelf life | Mapeproof SA Primer may be stored for 12 months in its original packaging, in a dry area at a temperature of +15°C to +25°C. |
| Density | 0.9 g/cm³ |
| Dry solids | 31% |
Typical values as Mapei prints them in the data sheet for Mapeproof SA Primer. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapeproof SA Primer may be stored for 12 months in its original packaging, in a dry area at a temperature of +15°C to +25°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeproof SA Primer, a primer manufactured by Mapei. Allow 0.2 kg/m2, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeproof SA Primer |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Consumption | 0.2 kg/m2 |
| Pack size | 10 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Ca 200 g/m², depending on the absorption rate of the substrate.
10 kg
You can download the official Mapeproof SA Primer technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapeproof SA Primer in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeproof SA Primer you need, or describe the job and we will work it out with you.

