
Mapei AccessoryNo. 36 / 47
Mapetex Sel Technical Data Sheet (TDS)
Mapei accessory.
Holes are the feature here, not a defect. Mapetex Sel is a needle punched polypropylene fabric perforated with 0.2 mm macro holes so the second coat of membrane can grip the first through the reinforcement instead of sitting on it.
- Large scale containment basins
- Retaining walls and foundations
- Hanging gardens and flat roofs
- Swimming pools
- Bathrooms and shower cubicles
- Terraces
Build a list across products and send it once, or ask about Mapetex Sel on WhatsApp now.
- Supplied
- 25 m roll, 1 m wide, lapped 5 cm
- Pack we stock
- 25 x 1 m
- Thickness
- (mm): 0.6
Mapei document 00911
About Mapetex Sel
At 80 g/m² and 0.6 mm thick it is the heavier of the two Mapetex fabrics, with tensile strength of 3.9 kN/m lengthways and 4.1 kN/m across to EN ISO 10319, and it is embedded between two layers of Mapelastic Turbo or Mapelastic Smart each 1 to 2 mm thick, sheets overlapping by at least 5 cm. Toughness, puncture resistance, ultimate elongation and crack bridging all improve as a result. Rolls are 25 m by 1 m. Reach for it on UAE structures that deform most, a large containment basin or an exposed flat roof, rather than a small bathroom.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Mapetex Sel as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Rolls are 25 m long and 1 m wide, lapped 5 cm at every junction.
As published in the data sheet
52.6m
- 1 m wide roll lapped 5 cm covers 0.95 m of width
- over 50 m2
Order 3 packs of 25 m roll, 1 m wide
Taken from the Mapetex Sel data sheet: PACKAGING: Mapetex Sel is available in 25 m long rolls with a width of 1 m. APPLICATION: adjacent sheets of Mapetex Sel must overlap by at least 5 cm at both the longitudinal and transverse junction points. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Mapetex Sel is a macro holed non woven fabric laid into the first coat of the waterproofing. What it publishes is the roll and the lap, so the quantity here is the length of fabric the area needs once the 5 cm lap is allowed for, and the number of rolls that comes to. The transverse laps at the end of each roll are not counted, so on a job made of many short runs order one roll over.
Application
Where it is used.
- 01Large scale containment basins
- 02Retaining walls and foundations
- 03Hanging gardens and flat roofs
- 04Swimming pools
- 05Bathrooms and shower cubicles
- 06Terraces
Specification
Technical data.
| Pack size | 25 x 1 m |
|---|---|
| Consistency | macro-holed non-woven fabric (0,2 mm diameter holes) |
| Storage and shelf life | Store in a dry, covered area. |
| Thickness | (mm): 0.6 |
| Weight | 80 |
| Fibre type | polypropylene |
| Tensile strength | 3.9 (longitudinal direction) 4.1 (transversal direction) EN ISO 10319 |
Typical values as Mapei prints them in the data sheet for Mapetex Sel. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 x 1 m. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Store in a dry, covered area. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapetex Sel, a accessory manufactured by Mapei. Allow 25 m roll, 1 m wide, lapped 5 cm, as published by the manufacturer. Applied thickness (mm): 0.6. Supplied in 25 x 1 m. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapetex Sel |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Supplied | 25 m roll, 1 m wide, lapped 5 cm |
| Thickness | (mm): 0.6 |
| Pack size | 25 x 1 m |
| Unit of measurement | m2 |
Frequently Asked Questions
25 x 1 m
You can download the official Mapetex Sel technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapetex Sel in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapetex Sel you need, or describe the job and we will work it out with you.