
Mapei WaterproofingNo. 37 / 47
Monolastic Technical Data Sheet (TDS)
Waterproofing to EN 14891 CM O1 P, EN 1504-2 coating (C) principles PI, MC and IR.
Monolastic is the one component cementitious waterproofing membrane in the Mapei range: cement, fine graded inerts and flexible acrylic polymers in a 20 kg bag, gauged with 5.4 to 5.8 litres of water and nothing else, where a two component Mapelastic brings its own liquid to site. It goes on by brush, roller or trowel in at least two layers, 1 mm minimum and 2 mm maximum per layer, at least 6 hours apart, to a finished 2 mm.
- Waterproofing balconies and terraces before laying ceramic
- Waterproofing bathrooms and showers
- Waterproofing swimming pools before laying ceramic
- Waterproofing concrete structures
- Waterproofing cementitious renders
- Waterproofing cementitious screeds
Build a list across products and send it once, or ask about Monolastic on WhatsApp now.
- Class
- EN 14891 CM O1 P, EN 1504-2 coating (C) principles PI, MC and IR
- Consumption
- 1.1 kg/m² per mm
- Pack we stock
- 20 kg
- Colour
- Grey
Mapei document 02018
About Monolastic
That 2 mm is the thickness every figure on the sheet is tested at: EN 14891 CM O1 P, crack bridging over 0.75 mm at +23C and at -5C, adhesion at or above 1.0 MPa. Ceramic follows 24 hours later on a C2 adhesive. Total thickness must not exceed 4 mm, and lightweight or green substrates are ruled out.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Monolastic as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 4 mm.
As published in the data sheet
110kg
- 1.1 kg/m2 per mm
- 2 mm thick
- over 50 m2
Order 6 packs of 20 kg bag
Taken from the Monolastic data sheet: CONSUMPTION: Approx. 1.1 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Thickness is the finished thickness of the membrane, not the thickness of one layer. The sheet prints a minimum of 1 mm and a maximum of 2 mm per layer, asks for at least two layers at least 6 hours apart, and says the total must not exceed 4 mm. 2 mm is the default because that is the thickness the sheet calls complete waterproofing and the thickness every performance figure in the table was tested at.
Application
Where it is used.
- 01Waterproofing balconies and terraces before laying ceramic
- 02Waterproofing bathrooms and showers
- 03Waterproofing swimming pools before laying ceramic
- 04Waterproofing concrete structures
- 05Waterproofing cementitious renders
- 06Waterproofing cementitious screeds
Specification
Technical data.
- EN 14891 CM O1 P, EN 1504-2 coating (C) principles PI, MC and IR
- EN 14891
- EMICODE EC1 Plus, very low emission
| Coverage | Approx. 1.1 kg/m2 per mm of thickness |
|---|---|
| Pack size | 20 kg bags |
| Pot life | approx. 1 hour at +20C |
| Colours | Grey |
| Mixing ratio | 100 kg of Monolastic with 27-29 kg of water, which is 5.4-5.8 litres per bag |
| Application temperature | surrounding and substrate temperature from +5C to +35C |
| Consistency | plastic-trowellable |
| Storage and shelf life | 12 months in its original packaging in a dry place |
| EMICODE | EC1 Plus, very low emission |
| Density of mix | 1450 kg/m3 |
| Minimum thickness per coat | 1 mm |
| Maximum thickness per coat | 2 mm |
| Maximum total thickness | 4 mm |
| Waiting time between coats | at least 6 hours, and only once the first coat has dried |
| Waiting time before tiling | at least 24 hours at +23C and 50% R.H. |
| Adhesion to concrete | greater than or equal to 1.0 MPa by pull-off, EN 1542 |
| Crack bridging | Class A3 at +23C (> 0.75 mm), EN 1062-7; > 0.75 mm at -5C, EN 14891-A.8.3 |
| Water vapour permeability | Sd < 3 m, Class I, EN ISO 7783 |
| Impermeability | W < 0.1 kg/m2 h0.5, Class W3, EN 1062-3 |
| Elasticity | elongation at 28 days greater than or equal to 30%, DIN 53504 mod. |
| Reaction to fire | Euroclass B-s1, d0 |
Typical values as Mapei prints them in the data sheet for Monolastic. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 kg of Monolastic with 27-29 kg of water, which is 5.4-5.8 litres per bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 1 hour at +20C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in its original packaging in a dry place in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Monolastic, a waterproofing manufactured by Mapei, classified EN 14891 CM O1 P, EN 1504-2 coating (C) principles PI, MC and IR. Allow 1.1 kg/m2 per mm, as published by the manufacturer. Mix at 100 kg of Monolastic with 27-29 kg of water, which is 5.4-5.8 litres per bag. Supplied in 20 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Monolastic |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Classification | EN 14891 CM O1 P, EN 1504-2 coating (C) principles PI, MC and IR |
| Consumption | 1.1 kg/m2 per mm |
| Pack size | 20 kg bags |
| Mixing ratio | 100 kg of Monolastic with 27-29 kg of water, which is 5.4-5.8 litres per bag |
| Pot life | approx. 1 hour at +20C |
| Unit of measurement | m2 |
Frequently Asked Questions
Monolastic is classified EN 14891 CM O1 P, EN 1504-2 coating (C) principles PI, MC and IR according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: Approx. 1.1 kg/m2 per mm of thickness
20 kg bags
You can download the official Monolastic technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Monolastic in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Monolastic you need, or describe the job and we will work it out with you.