
Mapei WaterproofingNo. 38 / 47
Planiseal 288 Technical Data Sheet (TDS)
Mapei waterproofing.
Planiseal 288 is a two component cementitious waterproofing mortar for structures that hold water or keep it out, rated to a maximum of 1.5 bar of counterpressure. Mapei lists lift pits, ornamental tanks, swimming pools, basins and reservoirs, and it also covers balconies and small exposed walkable surfaces, so it spans buried work and light foot traffic.
- Waterproofing lift pits and underground structures
- Tanks, basins and reservoirs
- Swimming pool structures
- Internal or external waterproofing of concrete and masonry
- Balconies and small walkable exposed surfaces
Build a list across products and send it once, or ask about Planiseal 288 on WhatsApp now.
- Consumption
- 3.8 kg/m² over 2 coats
- Pack we stock
- 5 kg
- Colour
- grey or white white
Mapei document 07451
About Planiseal 288
It can be applied to the internal or external face of concrete and masonry underground structures, which matters when only one side is reachable. Components mix at 4 parts A to 1 part B and consumption is about 1.9 kg per square metre for each millimetre of thickness, from 5 kg units that suit small pits and local repairs. It meets the requirements of EN 1504-2. Check that counterpressure limit against the UAE water table before specifying it.
Documentation
Related documentation
Technical data sheet
1.5 MB · PDF
Planiseal 288 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats, 1 mm per coat
The sheet calls for 2 to 3.
As published in the data sheet
190kg
- Trowel, roller, brush or spray, 1 mm per coat: 1.9 kg/m2
- 2 coats
- over 50 m2
Order 8 packs of 25 kg kit, component A 20 kg bag plus component B 5 kg canister
Taken from the Planiseal 288 data sheet: CONSUMPTION: Approx. 1.9 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. In tanks and swimming pools the sheet asks for at least three coats to form a layer 3 mm thick, which is the third coat here. The sheet forbids more than 2 mm per coat. The consumption figure is for a seamless film on a flat surface and is higher on uneven substrates, which the sheet does not quantify.
Application
Where it is used.
- 01Waterproofing lift pits and underground structures
- 02Tanks, basins and reservoirs
- 03Swimming pool structures
- 04Internal or external waterproofing of concrete and masonry
- 05Balconies and small walkable exposed surfaces
Specification
Technical data.
- EN 14891
| Coverage | Approx. 1.9 kg/m² per mm of thickness. The consumption figures indicated are for a seamless film on a flat surface and are higher if applied on uneven substrates. |
|---|---|
| Pack size | 5 kg |
| Colours | grey or white white |
| Mixing ratio | component A : component B = 4 : 1 |
| Bond strength | by pull-off: EN 1542 |
| Consistency | powder liquid |
| Storage and shelf life | Planiseal 288 component A may be stored for 12 months in its original packaging in a dry place. This product conforms to the prescriptions of Reg. (EC) N. 1907/2006 (REACH) - Annex XVII, item 47. Planiseal 288 component B may be stored for 24 months. Store Planiseal 288 in a dry place at a temperatu |
| Density | 1900 kg/m³ |
Typical values as Mapei prints them in the data sheet for Planiseal 288. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 4 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
Planiseal 288 component A may be stored for 12 months in its original packaging in a dry place. This product conforms to the prescriptions of Reg. (EC) N. 1907/2006 (REACH) - Annex XVII, item 47. Planiseal 288 component B may be stored for 24 months. Store Planiseal 288 in a dry place at a temperatu in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planiseal 288, a waterproofing manufactured by Mapei. Allow 3.8 kg/m2 over 2 coats, as published by the manufacturer. Mix at component A : component B = 4 : 1. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planiseal 288 |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Consumption | 3.8 kg/m2 over 2 coats |
| Pack size | 5 kg |
| Mixing ratio | component A : component B = 4 : 1 |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Approx. 1.9 kg/m² per mm of thickness. The consumption figures indicated are for a seamless film on a flat surface and are higher if applied on uneven substrates.
5 kg
You can download the official Planiseal 288 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Planiseal 288 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planiseal 288 you need, or describe the job and we will work it out with you.