
Mapei WaterproofingNo. 39 / 47
Planiseal 88 Technical Data Sheet (TDS)
Waterproofing to EN 1504-2 CLASSIFIED AS MC IR.
An osmotic mortar works differently from a flexible coating. Planiseal 88 is a cementitious powder that seals masonry and concrete by forming crystals within the pores of the substrate itself, which is why it is suitable for contact with drinking water and classified to EN 1504-2 as MC IR.
- Waterproofing potable water tanks
- Masonry and concrete structures below grade
- Osmotic waterproofing of water retaining structures
- Tank linings in contact with drinking water
- Concrete protection to EN 1504-2
Build a list across products and send it once, or ask about Planiseal 88 on WhatsApp now.
- Class
- EN 1504-2 CLASSIFIED AS MC IR
- Consumption
- 3 kg/m² over 2 coats
- Pack we stock
- 25 kg
- Colour
- Grey, White
Mapei document 01148 · revision 4-2016
About Planiseal 88
It suits stable structures such as potable water tanks and below grade walls rather than a roof or balcony that moves, because an osmotic mortar is rigid by nature. Mix 100 parts powder with 21 to 23 parts water, 5.25 to 5.75 litres per bag, allow about an hour of pot life and 1.5 kg per square metre per millimetre of thickness, from 25 kg bags. The application range reaches +40°C, generous for the Gulf, but shelf life shortens in heat and humidity, so rotate stock.
Documentation
Related documentation
Technical data sheet
Revision 4-2016 · 4.5 MB · PDF
Planiseal 88 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats, 1 mm per coat
The sheet calls for 2 to 3.
As published in the data sheet
150kg
- Brush, trowel or spray, 1 mm per coat: 1.5 kg/m2
- 2 coats
- over 50 m2
Order 6 packs of 25 kg bag
Taken from the Planiseal 88 data sheet: CONSUMPTION: 1.5 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. The sheet asks for a final thickness of approximately 2 to 3 mm and says application by brush may require 2 to 3 coats, so three coats is within spec and two is the minimum. By trowel, the first coat should be brushed on. This is a rigid waterproofing and the sheet says it must not be exposed to vehicular traffic.
Application
Where it is used.
- 01Waterproofing potable water tanks
- 02Masonry and concrete structures below grade
- 03Osmotic waterproofing of water retaining structures
- 04Tank linings in contact with drinking water
- 05Concrete protection to EN 1504-2
Specification
Technical data.
- EN 1504-2 CLASSIFIED AS MC IR
- EN 14891
| Classification | EN 1504-2 CLASSIFIED AS MC IR |
|---|---|
| Coverage | 1.5 kg/m² per mm of thickness. |
| Pack size | 25 kg |
| Pot life | approx. 1 hour |
| Colours | Grey, White |
| Mixing ratio | 100 parts of Planiseal 88 with 21-23 parts of water (5.25-5.75 litres of water per |
| Application temperature | from +5°C to +40°C |
| Consistency | powder |
| Storage and shelf life | When stored in a dry condition in the original, unopened bags, Planiseal 88 has a shelf life of 12 months. If stored at high temperatures and or high humidity, the shelf life may be reduced. |
| Recoat time | before putting into |
| Density | 1300 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Planiseal 88. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 parts of Planiseal 88 with 21-23 parts of water (5.25-5.75 litres of water per. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 1 hour. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in a dry condition in the original, unopened bags, Planiseal 88 has a shelf life of 12 months. If stored at high temperatures and or high humidity, the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planiseal 88, a waterproofing manufactured by Mapei, classified EN 1504-2 CLASSIFIED AS MC IR. Allow 3 kg/m2 over 2 coats, as published by the manufacturer. Mix at 100 parts of Planiseal 88 with 21-23 parts of water (5.25-5.75 litres of water per. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planiseal 88 |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Classification | EN 1504-2 CLASSIFIED AS MC IR |
| Consumption | 3 kg/m2 over 2 coats |
| Pack size | 25 kg |
| Mixing ratio | 100 parts of Planiseal 88 with 21-23 parts of water (5.25-5.75 litres of water per |
| Pot life | approx. 1 hour |
| Unit of measurement | m2 |
Frequently Asked Questions
Planiseal 88 is classified EN 1504-2 CLASSIFIED AS MC IR according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.5 kg/m² per mm of thickness.
25 kg
You can download the official Planiseal 88 technical data sheet as a PDF directly from this page, revision 4-2016, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Planiseal 88 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planiseal 88 you need, or describe the job and we will work it out with you.