
Mapei Surface TreatmentNo. 40 / 47
Planiseal WR 100 Technical Data Sheet (TDS)
Surface Treatment to CE EN 1504-2 C PI MC IR.
Planiseal WR 100 protects reinforced concrete without covering it. A ready mixed, pure silane based hydrophobising liquid, it migrates into the surface and leaves a water repellent zone inside the concrete, so chloride bearing water is kept out while the surface keeps its appearance.
- Water repellent protection of reinforced concrete
- Structures exposed to chlorides
- Vertical and horizontal concrete surfaces
- New concrete and repaired concrete
- Porous and compact concrete substrates
- Durability protection to EN 1504-2
Build a list across products and send it once, or ask about Planiseal WR 100 on WhatsApp now.
- Class
- CE EN 1504-2 C PI MC IR
- Consumption
- 0.2 to 0.4 kg/m² over 2 coats
- Pack we stock
- 5 kg
- Colour
- trasparent
Mapei document 08202
About Planiseal WR 100
That makes it a durability treatment for structures exposed to aggressive agents, chlorides in particular, which is the mechanism behind most reinforcement corrosion in coastal Gulf concrete. It goes onto vertical and horizontal surfaces, onto porous or compact concrete, onto new work and onto concrete already repaired, at roughly 0.1 to 0.2 kg per square metre per coat from 5 kg units. It is CE marked to EN 1504-2. Treat the surface once repairs have cured and the concrete is dry, because a silane needs open pores to migrate into.
Documentation
Related documentation
Technical data sheet
1.3 MB · PDF
Planiseal WR 100 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
10.0 to 20.0kg
- Per coat: 0.1 to 0.2 kg/m2
- 2 coats
- over 50 m2
Order 2 to 4 packs of 5 kg tank
Taken from the Planiseal WR 100 data sheet: CONSUMPTION: varies according to the porosity of the substrate and is generally around 0.1-0.2 kg/m2 per coat. No site allowance is added unless you turn one on. The sheet recommends two coats for a more uniform distribution, and the second coat may be applied while the first is still wet.
Application
Where it is used.
- 01Water repellent protection of reinforced concrete
- 02Structures exposed to chlorides
- 03Vertical and horizontal concrete surfaces
- 04New concrete and repaired concrete
- 05Porous and compact concrete substrates
- 06Durability protection to EN 1504-2
Specification
Technical data.
- CE EN 1504-2 C PI MC IR
| Classification | CE EN 1504-2 C PI MC IR |
|---|---|
| Coverage | Consumption varies according to the porosity of the substrate and is generally around 0.1-0.2 kg/m² per coat. |
| Pack size | 5 kg |
| Colours | trasparent |
| Application temperature | from +5°C to +35°C |
| Consistency | liquid |
| Storage and shelf life | Planiseal WR 100 may be stored for 24 months in its original packaging in a covered, dry area. Store the product in an area with a temperature of +5°C to +35°C. |
| Density | 0.88 g/cm |
Typical values as Mapei prints them in the data sheet for Planiseal WR 100. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Planiseal WR 100 may be stored for 24 months in its original packaging in a covered, dry area. Store the product in an area with a temperature of +5°C to +35°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planiseal WR 100, a surface treatment manufactured by Mapei, classified CE EN 1504-2 C PI MC IR. Allow 0.2 to 0.4 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planiseal WR 100 |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Classification | CE EN 1504-2 C PI MC IR |
| Consumption | 0.2 to 0.4 kg/m2 over 2 coats |
| Pack size | 5 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Planiseal WR 100 is classified CE EN 1504-2 C PI MC IR according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Consumption varies according to the porosity of the substrate and is generally around 0.1-0.2 kg/m² per coat.
5 kg
You can download the official Planiseal WR 100 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Planiseal WR 100 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planiseal WR 100 you need, or describe the job and we will work it out with you.

