
Mapei Bonding AgentNo. 33 / 53
Mapewrap 21 Technical Data Sheet (TDS)
Mapei bonding agent.
MapeWrap 21 is a two component, super fluid epoxy resin used to impregnate MapeWrap fabrics immediately before they are placed on concrete, reinforced concrete or masonry for repair or strengthening. It belongs to the composite strengthening system rather than to the mortar or sealant ranges: the fabric carries the load, and the resin saturates it and bonds it to the prepared substrate.
- Impregnating MapeWrap fabrics using the damp system
- Strengthening concrete and reinforced concrete elements
- Strengthening masonry elements
- Composite repair of beams, columns and slabs
Build a list across products and send it once, or ask about Mapewrap 21 on WhatsApp now.
- Pack we stock
- 5 kg
- Colour
- transparent yellow
Mapei document 01007
About Mapewrap 21
Super fluid consistency is what makes it the damp system resin, with the fabric wetted out as it goes on. Adhesion to concrete exceeds 3 N per square millimetre after 7 days at 23 degrees, with failure occurring in the concrete rather than at the bond line. The working range is 10 to 30 degrees, which on a UAE facade usually means early morning work. Supplied in 5 kg units with a 24 month shelf life.
Documentation
Related documentation
Technical data sheet
1.5 MB · PDF
Mapewrap 21 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
Consumption depends on the type of fabric and the sheet prints a separate g/m2 table for carbon, glass and basalt MapeWrap fabrics, running from 800 to 900 g/m2 for BI-AX 230 up to 2700 to 2800 g/m2 for UNI-AX 1200. Pick the fabric on the sheet's table rather than from an average.
There is no area calculator for Mapewrap 21 because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Impregnating MapeWrap fabrics using the damp system
- 02Strengthening concrete and reinforced concrete elements
- 03Strengthening masonry elements
- 04Composite repair of beams, columns and slabs
Specification
Technical data.
| Pack size | 5 kg |
|---|---|
| Colours | transparent yellow |
| Bond strength | (EN 1542): > 3 N/mm² (after 7 days at +23°C - concrete failure) |
| Application temperature | from +10°C to +30°C |
| Consistency | liquid |
| Storage and shelf life | MapeWrap 21 can be stored up to 24 months in its original sealed packaging at temperatures not below +10°C. |
| Tensile strength | 30 N/mm² |
Typical values as Mapei prints them in the data sheet for Mapewrap 21. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
MapeWrap 21 can be stored up to 24 months in its original sealed packaging at temperatures not below +10°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapewrap 21, a bonding agent manufactured by Mapei. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapewrap 21 |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Pack size | 5 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
5 kg
You can download the official Mapewrap 21 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Mapewrap 21 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapewrap 21 you need, or describe the job and we will work it out with you.

