
Mapei Bonding AgentNo. 34 / 53
Mapewrap 31 Technical Data Sheet (TDS)
Mapei bonding agent.
Used for the dry system, MapeWrap 31 is a two component epoxy adhesive of medium viscosity applied to the prepared surface so that the MapeWrap fabric is laid into it and rolled through, rather than being saturated beforehand. It serves the same purpose as the rest of the system, repairing or strengthening concrete, reinforced concrete and masonry elements with composite fabric, but the paste consistency of component A holds on a vertical face where a super fluid resin would run.
- Impregnating MapeWrap fabrics using the dry system
- Repair and strengthening of concrete and reinforced concrete
- Strengthening masonry elements
- Composite reinforcement on vertical faces
Build a list across products and send it once, or ask about Mapewrap 31 on WhatsApp now.
- Pack we stock
- 5 kg
- Colour
- component A yellow, component B transparent yellow
Mapei document 01008
About Mapewrap 31
Adhesion to concrete is greater than 3 N per square millimetre after 7 days, with failure in the concrete. The working range is 5 to 30 degrees and shelf life is 24 months at not below 5 degrees. Consumption depends entirely on which fabric is specified, so take it from the system schedule rather than estimating it.
Documentation
Related documentation
Technical data sheet
1.1 MB · PDF
Mapewrap 31 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
Consumption depends on the type of fabric and the sheet prints a separate g/m2 table for each MapeWrap fabric range, running from about 900 to 1000 g/m2 on the lightest unidirectional carbon fabrics upward. Pick the fabric on the sheet's table rather than from an average.
There is no area calculator for Mapewrap 31 because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Impregnating MapeWrap fabrics using the dry system
- 02Repair and strengthening of concrete and reinforced concrete
- 03Strengthening masonry elements
- 04Composite reinforcement on vertical faces
Specification
Technical data.
| Pack size | 5 kg |
|---|---|
| Colours | component A yellow, component B transparent yellow |
| Bond strength | * (EN 1542): > 3 (after 7 days - concrete failure) |
| Application temperature | from +5°C to +30°C |
| Consistency | component A paste, component B liquid |
| Storage and shelf life | The product may be stored for 24 months in its original packaging and at temperatures not below +5°C. |
| Density | 1.06 g/cm³ |
| Tensile strength | ≥ 40 N/mm² |
Typical values as Mapei prints them in the data sheet for Mapewrap 31. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
The product may be stored for 24 months in its original packaging and at temperatures not below +5°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapewrap 31, a bonding agent manufactured by Mapei. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapewrap 31 |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Pack size | 5 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
5 kg
You can download the official Mapewrap 31 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Mapewrap 31 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapewrap 31 you need, or describe the job and we will work it out with you.

