
Mapei Bonding AgentNo. 35 / 53
Mapewrap 31 SP Technical Data Sheet (TDS)
Mapei bonding agent.
MapeWrap 31 SP is a medium viscosity epoxy resin for impregnating MapeWrap C or G UNI-AX, BI-AX and QUADRI-AX fibre sheet in external structural repair, strengthening and upgrade work, using the dry system. The two components are mixed together with a slow speed drill and stirrer until the resin is uniform.
- Impregnating MapeWrap C and G UNI-AX fibre sheet
- Impregnating BI-AX and QUADRI-AX fibre sheet
- External structural repair and strengthening
- Structural upgrade of concrete and masonry elements
Build a list across products and send it once, or ask about Mapewrap 31 SP on WhatsApp now.
- Pack we stock
- 15 kg
- Colour
- cloudy amber
Mapei document 1009
About Mapewrap 31 SP
Its gel consistency sets it apart within the range, and so does its temperature window of 10 to 35 degrees, wider at the top end than the other impregnation resins, which matters on a UAE strengthening job where a shaded facade still reads above 30 degrees by mid morning. Estimated coverage is around 950 g per square metre based on presaturating a 900 g fibre sheet. Supplied in 5 kg and 15 kg units with an 18 month shelf life in sealed original packaging.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Mapewrap 31 SP as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
Coverage depends on the type of fabric, unidirectional, bi-directional or quadri-directional, and on the height. The sheet gives only an estimate, approx. 950 g/m2 based on presaturation of a 900 g fibre sheet, so the fabric being used has to be named before a quantity is quoted.
There is no area calculator for Mapewrap 31 SP because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Impregnating MapeWrap C and G UNI-AX fibre sheet
- 02Impregnating BI-AX and QUADRI-AX fibre sheet
- 03External structural repair and strengthening
- 04Structural upgrade of concrete and masonry elements
Specification
Technical data.
| Coverage | Coverage depends on the type on fabric (unidirectional, bi-directional and quadri-directional) and the height: estimated coverage is 950 g /m2 based on presaturation of 900 g fiber sheet. |
|---|---|
| Pack size | 15 kg, 5 kg |
| Colours | cloudy amber |
| Application temperature | from +10°C to +35°C |
| Consistency | component A gel, component B liquid |
| Storage and shelf life | 18 months in original sealed packaging. |
| Tensile strength | 28 MPa |
Typical values as Mapei prints them in the data sheet for Mapewrap 31 SP. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
15 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
18 months in original sealed packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapewrap 31 SP, a bonding agent manufactured by Mapei. Supplied in 15 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapewrap 31 SP |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Pack size | 15 kg, 5 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Coverage depends on the type on fabric (unidirectional, bi-directional and quadri-directional) and the height: estimated coverage is 950 g /m2 based on presaturation of 900 g fiber sheet.
15 kg, 5 kg
You can download the official Mapewrap 31 SP technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Mapewrap 31 SP in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapewrap 31 SP you need, or describe the job and we will work it out with you.

