
Mapei AccessoryNo. 36 / 53
Mapewrap C Fiocco Technical Data Sheet (TDS)
Mapei accessory.
Structural connections are the whole job of MapeWrap C FIOCCO, a unidirectional high strength carbon fibre cord inside a protective gauze sheath, supplied in 6, 8, 10 and 12 mm diameters on 10 m rolls. One end is impregnated with MapeWrap 21 super fluid epoxy, broadcast with dry quartz sand and pushed into a drilled hole already filled with MapeWrap epoxy grout or a Mapefix chemical anchor; the free end is splayed out and bonded over the element being tied, in concrete, stone, brick or tuff.
- Structural connections placed inside old masonry
- Structural and functional restoration of concrete and masonry elements
- Anchoring Mapegrid mesh systems on vaulted structures
- Anchoring mesh strengthening on brick, stone and tuff facing walls
- Connections between old perimeter facing walls and Carboplate sheets
- Connections to MapeWrap fabrics strengthening beams and floor slabs
Build a list across products and send it once, or ask about Mapewrap C Fiocco on WhatsApp now.
- Pack we stock
- 10 mm, 10 m, 12 mm
Mapei document 01017
About Mapewrap C Fiocco
It anchors Mapegrid mesh and MapeWrap or Carboplate strengthening so the reinforcement cannot peel away. Fibre tensile strength is 4,830 N per square millimetre, but hole size, cord diameter and spacing come from the strengthening design and only the project engineer sets them. Over coat the finished system, since the listed coatings screen UV in direct sunlight.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Mapewrap C Fiocco as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
A carbon fibre cord used to form connectors and anchors, so the sheet publishes no rate for the cord itself and no roll width to lap. It comes in various diameters in boxes of 10 m rolls, and every piece is cut to the length the detail needs, which comes off the structural drawing rather than off a floor area. The MapeWrap Primer 1, MapeWrap 11 or 12 and MapeWrap 31 or Mapefix epoxy system that impregnates it and fills the hole are separate products with their own consumption rates.
There is no area calculator for Mapewrap C Fiocco because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Structural connections placed inside old masonry
- 02Structural and functional restoration of concrete and masonry elements
- 03Anchoring Mapegrid mesh systems on vaulted structures
- 04Anchoring mesh strengthening on brick, stone and tuff facing walls
- 05Connections between old perimeter facing walls and Carboplate sheets
- 06Connections to MapeWrap fabrics strengthening beams and floor slabs
Specification
Technical data.
| Pack size | 10 mm, 10 m, 12 mm |
|---|---|
| Consistency | "cord" formed by one-directional fibres wrapped in a protective |
| Storage and shelf life | Store in a covered and dry area. |
| Density | 1.8 g/cm 2.66 g/cm 2.67 g/cm |
| Tensile strength | 4,830 N/mm² 2,290 N/mm² 2,900 N/mm² |
| Fibre type | high-strength carbon Type E glass high-strength basalt |
Typical values as Mapei prints them in the data sheet for Mapewrap C Fiocco. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 mm, 10 m, 12 mm. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Store in a covered and dry area. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapewrap C Fiocco, a accessory manufactured by Mapei. Supplied in 10 mm, 10 m, 12 mm. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapewrap C Fiocco |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Pack size | 10 mm, 10 m, 12 mm |
| Unit of measurement | m2 |
Frequently Asked Questions
10 mm, 10 m, 12 mm
You can download the official Mapewrap C Fiocco technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
Mapewrap C Fiocco in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapewrap C Fiocco you need, or describe the job and we will work it out with you.